Southbend P16-PF45 Specification

Category
Deep fryers
Type
Specification

This manual is also suitable for

Job Item#
www.yatesgd.com www.yatesgraphicdesign.com
Sectional Deep Fryer
16” 45lb and 20” 65lb Sectional Fryer
Standard Features
- Availablein45lband65lbcapacity
- 9”frontrailtomatchSectionalRange
- Stainlesssteeltankandcabinet
- Twotwinplated,meshfrybasketwithplasticcoated,heat
resistanthandles
- Quickrecoveryisprovidedtoeliminatewaitingbetween
loads
- Widespacingtubefrypot-allowsmoreheattobe
transferredtooilandeasycleaning
- 1-1/4”fullportdrainvalvehelpseliminateclogging
- Largecoldzonecapturesfoodparticles,reducesavor
transferandextendsoillife
- Singleunitcombinationgasshut-off,pressureregulator
andpilotignitionsystem
- 6”adjustablelegsfront,6”xedcastersrear
- 1-1/4”frontmanifoldwith1”reargasconnectionstandard
- 100%safetyshutoff
- Warranty:Twoyearsparts,oneyearlabor
- Adjustablelegsinfrontandrigidcasterinrear
NewPitcoSolsticeburner/bafedesign:
-Increasescookingproduction.
-Lowersuetemperature.
-Improvesworkingenvironment.
 -GeneratesmoreproductionperBTU.
* 24”MINIMUMFLUERISERREQUIRED*
PrintedinUSA
45 lb Sectional Fryer
P16-PF45
65 lb Sectional Fryer
P20-PF65
Exterior Finish:Stainlesssteelfront.
Frypot: 16-gauge,type430 #3Weldedtank
withanextrasmoothpeenednishensureseasy
cleaning.Long-lasting,high-temperaturealloy
stainlesssteelheatbafesaremountedintheheat
exchangertubestoprovidemaximumheatingand
combustionefciency.Frontaccess,quickopening
1-1/4”drainvalve.
Gas Control System: Includesmanualshut-off,
100%safetyshut-offpilotgaslter,pilotadjustment
and200°to400°adjustablethermostat.Highlimit
controlautomaticallyshutsdownmainburnerand
pilotifoiltemperatureexceeds475°F.
Optional Oil Filtration:Simpletwo-stepoperation:
1.Bluehandlevalveisopenedtodrainoilintolterpan.
2.Redhandlevalveisopenedtoreturnoilfromltertofryer.
-Self-aligninglterpipingmakesiteasytoassembleand
disassemble.
-Larger3”(7.6cm)drainlineallowsforfasterdraining
withoutclogging.
-Light-weight,removablelterpickupassembly,withbuilt-in
handle,forfastmediacleaningunderbusyconditions.
-Highowpumpandlargereturnlinesproducefasteroil
relltimes.
-Largeltermediacollectsmoredebris,whichextendstime
betweenchanges.
FormPSFRev5(November/2010)
STANDARD CONSTRUCTION SPECIFICATIONS
by
(shown with 36” high ue riser)
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Models:
6" (152)
30"
(762)
Model P16-PF45 Model P20-PF65
60"
(1524)
72"
(1829)
24" Flue Riser
36" Flue Riser
36"
(914)
33-34"
(859)
4-1/2" (114)
37-3/4" (960)
34" (864)
40" (1017)
43-3/4" (1112)
Flue riser for deep depth-option
extends rearward 6" (frypot size
is the same as for standard depth).
1-1/4” Front
Gas Manifold
Model P16-PF45 Model P20-PF65
16"
(406)
20"
(508)
33-3/4"
(858)
9"
9"
(178)
2-3/4 "
(70)
(178)
5-1/2"
(140)
2-3/4"
(70)
1” rear gas connection standard
P16-PF45 P20-PF65
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
OPTIONS AND ACCESSORIES
GAS:Eachunithasa1-1/4”frontgasmanifoldthatcouplestothe
adjacentsectionalunit(s),anda1”NPTmalereargasconnection
(Seeplanviewnoteabove).Minimumsupplypressureis7”W.C.
fornaturalgasand11”W.C.forpropane.Allsectionalunitsrequire
aregulatedgassupply;pressureregulatortobeorderedseparately.
Ifusingaexiblehosegasconnection,theI.D.ofthehosemustnot
besmallerthantheconnectorontheunitandmustcomplywithANSI
Z21.69,providinganadequatemeansofrestrainttopreventundue
strainonthegasconnection
MISCELLANEOUS
UTILITY INFORMATION
-Ifcastersareusedwithexhose,arestrainingdevice
shouldbeusedtoeliminateunduestainontheexhose.
-Minimumclearancefromnoncombustibleconstruction
iszero.Minimumclearancefromcombustibleconstruc-
tionis10”onsidesand6”onrear.
-Installunderventedhood.
-Checklocalcodesforreandsanitaryregulations.
NOTICE:
Southbendhasapolicyofcontinuousproductresearch
andimprovement.Wereservetherighttochange
specicationsandproductdesignwithoutnotice.Such
revisionsdonotentitlethebuyertocorresponding
changes,improvements,additionsorreplacementsfor
previouslypurchasedequipment.
FormPSFRev5(November/2010)
 Fryerltersystem(7.0A,120V,1phase)
 Stainlesssteelfrypotcover
 Extrasinglebasket(fullsize)for14”pot
 FlueRisers:24”,36”(minimum
24”ueriserrequired)
 Heatlampoverdraincabinet
 Cablerestraintkit
 Extratwinsizebasketfor14”pot
 Stainlesssteelsides
 Stainlesssteeldivider
SHIPPING CRATE DIMENSIONS & WEIGHT
(Door-entry clearance when uncrated is 16.5” for
Model P16-PF45 and 20.5” for Model P20-PF65)
Model Width Height Depth Volume Weight
P16-PF45
20.0
(508)
45.0
(1143)
42.5
(1080)
22.1 cu ft
(0.63 cu m)
210 lbs
(95 kg)
P20-PF65
23.0
(584)
41.0
(1041)
43.0
(1092)
23.5 cu ft
(0.66 cu m)
265 lbs
(120 kg)
GAS
Model
Natural/Propane
BTU/Hour
P16-PF45 110,000
P20-PF65 150,000
  • Page 1 1
  • Page 2 2

Southbend P16-PF45 Specification

Category
Deep fryers
Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI