1
/
10
Enjoy Hands-free Communication with HSP-B
3
Headset
HSP-B3
User Manual
2
/
10
HEADSET OVERVIEW
FUNCTION
STEP
Power On/Pairing
Tap the Multi-function button
Power off
Hold the Multi-function button for 5 sec
Answer Telephone
Tap the Multi-function button
End up Calling
Tap the Multi-function button
Reject the Incoming call
Hold the Multi-function button for 2 sec
Call back last call
Double-tap the Multi-function button
Latest Number Redialing
Double-tap the Multi-function button
Volume up/Down
Tap the Volume button up(+)or down(-)
Previous/next Track
Hold the Volume +/- button for 2 sec
Pause/Play
Tap the Multi-function button
Restore to factory settings
Hold the MF button and Mute button for 5
seconds at the same time when charging.
3
/
10
Charging Port
1，1.5~2.0h(Full charging): 5.0V 150mAh
2
，
Best performance with full battery
Noise Cancelling
Double Microphone Noise Cancelling for Wind Noise
Reduction
Microphone Mute Button
During a call, tap the Mute button to mute the
microphone. You will hear “mute on” prompt.
Tap the Mute button again to open the microphone
and hear “mute off” confirmation.
Use Siri/Google Now
On the standby Status, Tap the Mute button to enable
(Siri/Google Now) Voice Assistant Function, after
voice prompt “BIP” then you can say your voice
command. One click can only process one voice
command.
4
/
10
LED Light
1，Under charging: Red indicator is on;
2
，
After charging full: The blue indicator is on;
3，Low battery: Red indicator flashes twice with voice
prompt
H0W TO CONNECT
Connect to Bluetooth devices
1 ， Power on & pairing status : press and hold the
multi-function button until the indicator light flashes
blue and red light, And you will hear the voice
prompt “ Power on ” , Then the headset will
antomatically enter the pairing status.
2
，
Activate Bluetooth and set it to search for new
devices.
•iPhone® : Settings > Bluetooth > On*
5
/
10
•Android™:Bluetooth: On > Scan for devices*
•PC/Notebook: Bluetooth Setting: On > add a
Bluetooth device
3，Select “HSP-B3”
4，Input password:0000 if needed(default password
is 0000)
NOTE: If your PC/Notebook does not support
Bluetooth function or remind you need driver, you
may need to use an external Bluetooth USB Adapter.
How to Reconnect:
1， You headset will try to reconnect the lost
connection；
2， If the headset doesn’t try to reconnect ， Please
click the multi-function button once or manully
connect with the wireless equipment menu of
the mobile phone；
Troubleshooting
6
/
10
I， The mobile phone can’t find the headset
Possible reasons:
1， The headset is not under ON and standby
state;
2， The headset program is error;
3
，
The program of the mobile phone is error;
Solutions:
1
，
After turning off the headset ,Hold the
Multi-funtion button(red and blue indicator
flashes by turn)to enable pairing state;
2， Recover the Wireless headset’s default
settings;
3， After restart the mobile phone, remove all
pairing data in the Wireless of the mobile
phone;
Cautions:
1， After the Wireless headset has entered in the
pairing mode, it will connect within 2min,
7
/
10
otherwise, the headset will automatically turn
off;
2， Hold the MF button and Mute button for 5
seconds at the same time when charging;
II， No sound from the headset
Possible Reasons:
1， The Volume of the mobile phone is unsuitable;
2
，
The Wireless headset and mobile phone are not
connected correctly;
3
，
The Wireless headset is out of the working range;
Solutions:
1
，
Adjust the volume in the mobile phone;
2， Operate with the reference of the use steps;
3
，
Keep the headset in the range of 10m to the
mobile phone without any obstacle;
Cautions:
1， Do not have any other operation when searching
headset for avoiding program error;
8
/
10
2， Please use headset near the mobile phone to
assure best effect;
III， Charging red indicator doesn’t light on
Possible Reasons:
The headset has not been used for a long period;
Solutions:
Charge headset for about 30min,and then the red
indicator may light on;
Cautions:
It will drop the capacity and service life of the battery
if it is over charged or the Wireless headset is stored
in the environment such as closed car;
TECHNICAL SPECIFICATIONS
Warning
1. The product is equipped with lithium battery.
Please do not expose the product to intense sunlight,
burn or throw it into the fire to avoid explosion.
9
/
10
2. This product can not be charged with a charger
which output voltage is higher than 5V, otherwise it
will burn out the headset by over-voltage.
Frequently Asked Questions
Why do I hear static noise on my headset?
*Wireless devices are susceptible to interference that
may affect audio quality and result in static. To avoid
blocking the Bluetooth signal, follow these guidelines:
1. Make sure the distance between your headset and
the paired device does not exceed 10 m.
2. Make sure there is a direct line of sight between
your headset and phone. Avoid placing objects that
can block radio signals between paired devices.
(include walls, doors and windows.)
3. Avoid environments where computers/microwave
ovens/high concentrations of WiFi are present
4. Keep your headset and mobile phone on the same
side of your body.
10
/
10
5. Avoid placing your mobile phone in a back pocket.
*Note: Low battery capacity in your headset and
mobile phone may affect the Bluetooth range.
/
