2. ESAB
  3. ESAB PAPR_EN CE DoC

ESAB ESAB PAPR_EN CE DoC Declaration of conformity

  • Hello! I am an AI chatbot trained to assist you with the ESAB ESAB PAPR_EN CE DoC Declaration of conformity. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DECLARATION OF CONFORMITY
According to
The (PPE) Directive (EU) 2016/425, entering into force 9 March 2016
The RoHS Directive 2011/65/EC, entering into force 2 January 2013
ESAB AIR PAPR Unit
1. PPE ESAB Air PAPR Unit, ESAB Welding Helmets, F20,A20,A30,G30,G40,G50 Warrior Tech and Sentinel A50
tter ADF or shaded visor and Protection Lens 1.5mm are for occupational use; Model: ESAB AIR PAPR Unit,
Welding Helmet, ADF and Protection Lens 1.5mm for welding protection;
2. Manufacturer; ESAB AB, Lindholmsallen 9, Box 8004 402 77, Gothenborg, Sweden.
3. The sole responsibility for issuing this Declaration of Conformity lies with the manufacturer: ESAB AB
4. Subject matter of the declaration. The ESAB AB Unit is certied to EN12941:1998 + A1:2003 + A2:2008, Class
TH3 P R SL in combination with F20, A20. A30, G30, G40, G50 and Warrior Tech. The ESAB AB Unit is certied
to EN12941:1998 + A1:2003 + A2:2008, Class TH2 P R SL in combination with the A50 Sentinel, and Savage
A40.
The following Welding Helmets are certied to DIN EN175:1997 with marking ESAB 175 B CE F20, A20, A30,
G30,G40,G50, Warrior Tech, A50 Sentinel, and Savage A40.
The following ADF’s are certied to DIN EN379:2003 + A1:2009 with marking ‘4/9-13 ESAB 1/1/1/2/379 CE
A20, A30, G50 and Savage A40’
The A50 Sentinel ADF is certied to DIN EN379:2003 + A1:2009 with marking ‘4/ 5-8 9-13 ESAB 1/1/1/1/379
CE.
The Protection Lenses 1.5mm is certied to DIN EN166:2001 with marking ‘ESAB 1 B CE’. The Protection
Lenses 1.0 mm is certied to DIN EN166:2001 with marking ‘ESAB 1 S CE’ The clear visors are certied to
EN166:2001 with marking ‘ESAB 1 B CE’
The Shade visors inner are certied to EN166:2001 with marking ‘ 2 ESAB 1 B CE, 3 ESAB 1 CE and 5 ESAB
1 B CE’’
The Shade visors outer are certied to EN166:2001 with marking ‘ 5 ESAB 1 F CE, 8 ESAB 1 F CE’’
The Complete Welding Helmet with PAPR Unit is designed to protect against impact from high speed particles,
spatter and thermal risks whilst welding, whilst also providing clean, ltered air.
5. The complete PAPR system specied above complies with the essential health and safety requirements of
Annex 2 of the PPE Regulation (EU) 2016/425 and the General Product Safety Directive 2001/95/EC.
6. Used harmonized standards and technical rules: EN12941:1998 + A1:2003 + A2:2008 PAPR System, EN175:1997
Welding helmet, EN379:2003 + A1:2009 Auto darkening Filter & EN166:2001 protection lenses.
7a. The notied body Apave Sudeurope SAS, Centre d’Essais et de Ceritifaction EPI, 17 Boulevard Paul Langevin,
38600 Fontaine, identication number 0082, has carried out the EU type examinations (module D). Test report
19.0207R, and EU-Type Examination Certicate 0082-3106-079-02-19-0199 were both issued on 22/02/2019.
7b. The notied body ECS GmbH, Huettfeldstrasse 50, 73430 Aalen, identication number 1883 has carried out
the EU type examinations (module B).
Product Test report number Certicate number Standard Issued
A20, A30 Helmet 10601-ECS-17 C2246.1ESAB EN 175 06/03/2017
1.5 Cover Len 12661- ECS-16 C2266.1ESAB EN 166 03/04/2017
A20 ADF 11701-ECS-14 C2265.1ESAB EN 379 03/04/2017
A30 10442-ECS-17 C2264.1ESAB EN 379 03/04/2017
Savage A40 ADF 12451-ECS-19 C2778.1ESAB EN 379 09/13/2019
Savage A40 Helmet 12452-ECS-19 C2779.1ESAB EN 175 09/13/2019
7c. The notied body DIN CERTCO GmbH, Alboinstr. 56, 12103, Berlin, Germany, Identication number 0196 has
carried out the EU type examinations (module B).
Product Test report number Certicate number Standard Issued
Sentinel A50 Helmet 13541-PZA-16 C5501ESAB/R0 EN 175 04/01/2017
F20 Helmet 12801-PZA-15 C5274ESAB/R1 EN 175 16/08/2016
G30 Helmet 10481-PZA-16 C5446ESAB/R0 EN 175 25/08/2016
G40/50 Helmet 10481-PZA-16
10482-PZA-16
C5447ESAB/R0 EN 175 25/08/2016
Sentinel A50 ADF 13531-PZA-16 C5570ESAB/R0 EN 379 21/02/2017
Warrior Tech ADF 11832-PZA-10
12152-PZA-11
12271-PZA-12
12272-PZA-12
12266-PZA-16
12267-PZA-16
C4628ESAB/R2 EN 379 11/10/2016
Inner visor 10501-PZA-16 C5449ESAB/R0 EN 166 EN 169 25/08/2016
Inner visor G30, G40,
G50
10491-PZA-16 C5448ESAB/R0 EN 166 25/08/2016
Outer visor G30 10511-PZA-16 C5450ESAB/R0 EN 166 EN 169 25/08/2016
8. For Category-III-PPE only: the PPE is subject to the conformity assessment procedure the ESAB AIR PAPR
is assessed on a conformity to type based on quality assurance of the production process Module D under
surveillance of the notied body Apave Sudeurope SAS, identication number 0082 annual audits are carried
out at our manufacturing site.
Date Signature Position
2020-05-21
Carlos De Lima Global R&D Standards and
Regulatory Expert
2020
/