Braeburn Braeburn 7500 Thermostat Kit Wi-Fi Installation guide

Type
Installation guide

This manual is also suitable for

Robertshaw Braeburn 7500 Thermostat Kit Wi-Fi is a versatile and user-friendly device that offers precise temperature control and advanced features for enhanced comfort and energy efficiency. With its wireless capabilities, you can conveniently adjust your home's temperature from anywhere using your smartphone or tablet. The 7500 Thermostat Kit also includes a programmable schedule, allowing you to set different temperatures for different times of the day to suit your routine.

Robertshaw Braeburn 7500 Thermostat Kit Wi-Fi is a versatile and user-friendly device that offers precise temperature control and advanced features for enhanced comfort and energy efficiency. With its wireless capabilities, you can conveniently adjust your home's temperature from anywhere using your smartphone or tablet. The 7500 Thermostat Kit also includes a programmable schedule, allowing you to set different temperatures for different times of the day to suit your routine.

Wireless
Setup Guide
Model 7500
Universal Programmable
Wireless Thermostat Kit
Leave this Setup Guide
with thermostat.
7500-105-02
®
Getting Started
1.1
Install and wire the control module to the
HVAC equipment (see Installer Guide,
Section 2, Part 1).
1.2
Install 2 supplied AA batteries into the thermostat
(See Installer Guide, Section 2, Part 4).
1
NOTE: Thermostat can be battery powered or 24 VAC
powered (hardwired). If multiple wireless remote sensors
are used, it is recommended to hardwire the thermostat.
DAY/TIME
Figure 1
2
Pair the Thermostat and Control Module
2.1 On the thermostat, press and hold down
the HOLD and RETURN buttons for
3 seconds.
2.2 The word CMOD (control module) will
appear in the display and the symbol
will ash (see Figure 1).
NOTE: If the control module has already been
paired, the symbol will not be flashing.
To reset wireless connection to control module,
see Installer Guide, Section 4.
2.3 On the powered control module, press and
hold the CONNECT button for 3 seconds
(see Figure 2).
2.4 The control module will enter pairing mode
for 60 seconds. During this time the blue
COMM indicator on the control module will
ash once every 2 seconds.
2.5 Once successfully paired, the symbol will
stop ashing and the blue COMM indicator
on the control module will turn on.
2.6 Press RETURN on the thermostat at any time to exit.
NOTE: If pairing was unsuccessful, try moving the thermostat or repositioning the
control module.
Connect
Button
Figure 2
PWR
COMM
3.1
Mount the thermostat (see Installer Guide, Section 2, Parts 2-5).
3.2
If applicable, install and connect any wireless remote accessories
(see Accessory Manual).
3.3
Congure Thermostat Installer Settings based on your particular application
(see Installer Guide, Section 4).
3.4
If desired, adjust User Settings, Time of Day and Program Schedule
(see User Manual).
3.5
Test system (see Installer Guide, Section 6).
3
Complete Installation
Braeburn Systems LLC
2215 Cornell Avenue • Montgomery, IL 60538
Technical Assistance: www.braeburnonline.com
844-BLU-LINK (844-258-5465) (U.S.)
630-844-1968 (Outside the U.S.)
©2018 Braeburn Systems LLC • All Rights Reserved • Made in China.
7500-105-02
®
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Braeburn Braeburn 7500 Thermostat Kit Wi-Fi Installation guide

Type
Installation guide
This manual is also suitable for

Robertshaw Braeburn 7500 Thermostat Kit Wi-Fi is a versatile and user-friendly device that offers precise temperature control and advanced features for enhanced comfort and energy efficiency. With its wireless capabilities, you can conveniently adjust your home's temperature from anywhere using your smartphone or tablet. The 7500 Thermostat Kit also includes a programmable schedule, allowing you to set different temperatures for different times of the day to suit your routine.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI