Karran Karran Laguna - Bisque, Karran Portland - White, Karran Winston - Bisque Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Karran Karran Laguna - Bisque Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FOR THE INSTALLER
INSTALLATION GUIDELINES
To cut out countertop, invert sink and position onto
the countertop. Locate sink front to rear and so that
the bowls will not interfere with the cabinets below.
Trace a line around the outside edge of the sink and
remove sink from countertop.
Measure 1/2” in from the initial sink outline and draw
a second line inside of the first. Draw a radius at
each corner that matches the outer radius of the
sink. This second inside line will be your cut line.
Drill a starter hole inside of the cutout line.
Using a jigsaw, cut just inside the cutout line. Once
the hole is cut, do a trail fit of the sink to check that it
fits properly.
After the trail fit remove the sink and apply a bead of
silicone (not included) to the underside of the sink
flange and position the sink in the countertop
opening.
Attach clips as illustrated. Sink clips will accommo-
date countertops up to 1” thick. If your countertop is
over 1” thick, please call Karran at 866-452-7726 to
order extended clips.
APPLY SILICONE
/