Wellcraft WAB2947 Installation guide

Brand
Wellcraft
Model
WAB2947
Type
Installation guide

This manual is also suitable for

Wellcraft WAB2947 Basement Window is designed to provide an easy-to-install egress solution for basements.

This window can be installed during new construction or as a retrofit to existing foundations. The window comes with a universal frame that allows for easy servicing and repair. The header, sill, and jamb pieces can be removed from the frame and reversed or replaced to make a window right. No cutting screwing or gluing required.

Wellcraft WAB2947 Basement Window is designed to provide an easy-to-install egress solution for basements.

This window can be installed during new construction or as a retrofit to existing foundations. The window comes with a universal frame that allows for easy servicing and repair. The header, sill, and jamb pieces can be removed from the frame and reversed or replaced to make a window right. No cutting screwing or gluing required.

Bringing Safety and Beauty Together
888-812-9545 • www.wellcraftwells.com
Item #088000001
©2008 Headwaters. All rights reserved. W7168–PDF 2/08
www.theTapcoGroup.com
Basement Window Installation
New Construction
Basement window installation has never been easier than with Wellcraft
Egress Windows. Designed to t the entire depth of foundation forms,
Wellcraft Egress Windows are fast and easy to install without the need for
pouring buck extensions or additional braces. Here’s How:
Locate the Top Inside sticker to insure proper installation.
1.
Place the window in between the forms. Fasten by nailing/screwing 2.
through the forms and into the interior wood bracing in all four corners
on both sides, or clamp the window into place with form clamps.
Pour the concrete. After the forms have been stripped Wellcraft Egress
3.
Window is complete. Remove the protective lm and wood bracing
and lock your sash. No pouring bucks, no hassles, and no return trips.
Service and Repair
Easy As 1, 2, 3!
Wellcraft Egress Windows have been designed to make servicing and
repair of damaged or incorrectly poured windows a snap. Incorporating a
‘Universal Frame’, the header, sill, and jamb pieces can be removed from
the frame and reversed or replaced to make a window right. Here’s How:
Place a 2x4 ush against the frame resting at against one of the jamb
1.
pieces. Using a hammer hit the 2x4 into the jamb piece until it pops
out from the frame.
Repeat as necessary on the other jamb, header. and sill piece. Both
2.
jamb pieces must be removed before header and sill pieces can be
removed.
Replace damaged pieces or reverse existing pieces to make the
3.
window right. Make sure the screen track is toward the outside. No
cutting, screwing, or gluing required.
Easy as 1, 2, 3!
Retro Fit
Cut foundation opening 2" larger than window frame size.1.
Locate the top inside sticker to insure proper installation.2.
Place window inside opening and center.3.
Apply expanding foam in gap between foundation and window frame.4.
Allow foam to fully cure before removing protective lm.5.
  • Page 1 1

Wellcraft WAB2947 Installation guide

Brand
Wellcraft
Model
WAB2947
Type
Installation guide
This manual is also suitable for

Wellcraft WAB2947 Basement Window is designed to provide an easy-to-install egress solution for basements.

This window can be installed during new construction or as a retrofit to existing foundations. The window comes with a universal frame that allows for easy servicing and repair. The header, sill, and jamb pieces can be removed from the frame and reversed or replaced to make a window right. No cutting screwing or gluing required.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents