Pawleys Island L-STBKTX User guide

Type
User guide

Pawleys Island L-STBKTX hammock stand provides a sturdy and stylish base for your relaxation. Crafted from durable steel, it features a weight capacity of 450 pounds. With its easy assembly, protective end caps, and included Z hooks, you can quickly set up your hammock and enjoy a comfortable lounging experience.

Pawleys Island L-STBKTX hammock stand provides a sturdy and stylish base for your relaxation. Crafted from durable steel, it features a weight capacity of 450 pounds. With its easy assembly, protective end caps, and included Z hooks, you can quickly set up your hammock and enjoy a comfortable lounging experience.

Hardware Included:
3 - Poles 4 - Protective Foot End Caps*
2 - Foot Brackets* 2 - Protective Pole End Caps
2 - Z Hooks
2 - Hooks with chain also will be included with some models
* Depending on your model, the foot bracket and
corresponding foot caps will be either round or square.
WARRANTY INFORMATION:
Products of The HammockSource are guaranteed to be free of defects in workmanship and materials
for up to one year after the purchase date. Prolonged exposure to weather conditions including snow,
rain, and humidity are not covered under the warranty nor is damage caused by normal wear, mildew,
or improper care including storage, maintenance, and installation. If an item is found to be defective
within one year of its purchase, it will be replaced without charge upon the return of the unit
accompanied by a sales receipt. If you choose to return an item, you must contact our customer
service department at 800.643.3522 to obtain a Return Authorization Number that will allow us to track
your unit once it arrives at our warehouse; thereby creating a faster response to your concern.
If you have any questions regarding our products, call our
toll-free consumer customer service line: 800.643.3522
Visit our web page: www.thehammocksource.com
Protective
Foot Caps
Protective
Foot Caps
Round Foot Bracket
CARE & MAINTENANCE:
Inspect the hammock and stand unit prior to relaxing as
well as periodically to ensure that:
All ropes are of solid construction with no frays in the
clew knot.
The hanging chain is not twisted as this will greatly
reduce the integrity of the chain.
Large Hammock Stand
Congratulations on your purchase of the Large Hammock Stand.
We believe that you will find it a product of unsurpassed quality
and durability.
Protective End Caps for
Large Hammock Stand with
square foot brackets
Protective
End Caps
Protective
End Caps
Protective End Caps for
Large Hammock Stand
with round foot brackets
ASSEMBLY:
1. Place the protective foot end caps on the foot brackets.
2. Arrange the foot brackets flat on the ground. *For the stand
with square foot brackets, ensure the shorter side of the elbow
section on the ground faces the other foot bracket. In this
direction, the foot brackets should sit flat on the ground rather
than on an edge.* See Fig. 1.
3. Place one pole between the two foot brackets and insert the
foot brackets. Push down on the spring pins while pushing the
poles into place until the spring pins on the foot brackets exit
through the holes and lock into place. See Fig. 1.
4. Arrange the remaining two poles at each end. Assemble by
pushing down on the spring pins as in step 3.
5. Place the pole end caps on the end poles.
6. Insert the Z hooks at each end. This is done by inserting the
hook perpendicular to the pole and turning it to align with the
pole.
7. Using the chain provided with your hammock or stand, hang
your hammock. Attach chain tightly on the Z hooks and sit
into the hammock slowly. Your rope hammock will stretch and
you may experience bottoming-out initially. Take extreme
care when sitting in the hammock for the first time. Once this
initial stretching occurs, you will want to tighten the hammock
chains. Repeat this until a comfortable height is reached;
always use care when sitting in an untightened hammock.
3055-B
1.OJ
Figure 1.
Z
Z
 Do not drag or pull your hammock stand when moving or
adjusting.
ALWAYS lift from both ends.
 If a wheel kit, purchased separately, is installed, you may
lift and move from the opposite end from the wheels.
 NEVER drag or pull your hammock stand even when
wheels are installed.
After any moving or adjusting of your hammock stand,
ALWAYS inspect to make sure the spring pins are properly
inserted. Failure to do so may result in the hammock stand
collapsing upon use.
WARNING: DO NOT EXCEED LOAD LIMIT OF 600 LBS. -
For Models with round foot brackets.
WARNING: DO NOT EXCEED LOAD LIMIT OF 450 LBS. -
For Models with square foot brackets.
Stands should be examined periodically to ensure that:
- Each welded joint is fully intact.
- There is no excessive rust.
- There are no missing caps (rust protection).
CAUTION! CAUTION! CAUTION!
DO NOT ALLOW CHILDREN TO USE THE HAMMOCK WITHOUT
DIRECT ADULT SUPERVISION. DO NOT PLACE INFANTS IN THE
HAMMOCK.
Square Foot Bracket
  • Page 1 1

Pawleys Island L-STBKTX User guide

Type
User guide

Pawleys Island L-STBKTX hammock stand provides a sturdy and stylish base for your relaxation. Crafted from durable steel, it features a weight capacity of 450 pounds. With its easy assembly, protective end caps, and included Z hooks, you can quickly set up your hammock and enjoy a comfortable lounging experience.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI