Pawleys Island TS120 Operating instructions

Brand: Pawleys Island

Model: TS120

Type: Operating instructions

Pawleys Island TS120 is a versatile device that can be used for a variety of purposes. It is perfect for relaxing in the backyard, camping, or even tailgating. The TS120 is made from durable materials and is built to last. It features a sturdy steel frame and a Textilene sling that is resistant to fading and mildew. The TS120 also comes with a convenient carrying bag for easy transport.

The TS120 is easy to set up and take down. It can be assembled in minutes without any tools. The sling is adjustable, so you can find the perfect position for relaxing. The TS120 is also lightweight and easy to move around.

This Wheel Kit, when properly installed, will allow you to move your hammock and stand (remember to empty the ham-

mock rst, of course) much more easily in order to follow the sun, stay in the shade, or simply move the combination to

mow the lawn.

Hammock Stand Wheel Kit

Congratulations on your purchase of the Hammock Stand Wheel Kit.

We believe that you will nd it a product of unsurpassed quality and durability.

ASSEMBLY INSTRUCTIONS:

The following steps should be taken in

order to install your Hammock Stand

Wheel Kit on your hammock stand:

1. Assemble the stand per instructions

included with the stand.

2. Attach the wheel bracket (Fig. 1) to

the upright pole for large stands (see

diagram) using the U-bolt and hex nuts

provided. (See Fig. 2 & 3) Do not tighten

the hex nuts at this point.

3. Place a wheel (Figs. 4 & 5) on each

axle of the wheel bracket.

4. Hand tighten the hex nuts on the

U-bolt while holding the bracket and

wheels at a point that holds the wheels

approximately 1/16” above the surface

on which the stand is resting.

5. Remove the wheels from the axles to

provide easier access to the hex nuts and

tighten the hex nuts.

6. Replace the wheels on the axles,

making sure that the longer yokes (Fig. 5)

of each wheel are turned inward. Secure

the wheels to the axles with the axle caps

(Fig. 6) by placing the cap over the axle

and striking the cap with a small hammer.

7. The stand now can be moved by lifting

the end of the stand opposite the wheels.

Fig. 1

Fig. 4

Yoke

Fig. 5

Fig. 6

If you have any questions regarding our products, call our

toll-free consumer customer service line: 800.643.3522

Visit our web page: www.thehammocksource.com

WARRANTY INFORMATION:

Products of The HammockSource are guaranteed to be free of defects in

workmanship and materials for up to one year after the purchase date.

Prolonged exposure to weather conditions including snow, rain, and

humidity are not covered under the warranty nor is damage caused by

normal wear, mildew, improper care including storage, maintenance,

and installation. If an item is found to be defective within one year of its

purchase, it will be replaced without charge upon the return of the unit

accompanied by a sales receipt. If you choose to return an item, you

must contact our customer service department at 800.643.3522 to obtain

a Return Authorization Number that will allow us to track your unit once

it arrives at our warehouse; thereby creating a faster response to your

concern.

5050

G.OJ

Upright Pole

Wheel Kit Installation

Point

Pawleys Island TS120 Operating instructions

Brand: Pawleys Island

Model: TS120

Type: Operating instructions

Download PDF

report

Pawleys Island TS120 Operating instructions

Pawleys Island TS120 Operating instructions

Related papers

Other documents