Thank you for choosing our products. Our new
quick release rails are default designed for square-
hole racks, but we have optional adapter for
customers who use round-hole rack and threaded-
hole rack. For the threaded-hole rack, as long as
the thread is M5 or larger, our screws with washer
can pass through the flange to mount this adapter
on the rack to connect to our rail. If customer's
rack can install our chassis before, basically this
rail can also be mounted on their rack.
This adapter set is ready in our warehouse and for
you to order anytime. This adapter set will
running change to put in accessory box of the
upcoming chassis, not in the current chassis yet.
/