Channel Vision ST-2000 User manual

Category
Door intercom systems
Type
User manual

This manual is also suitable for

500-150revD
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for one
year from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not
supplied by Channel Vision Technology, or failures due to accident,
misuse, abuse, or alteration of the equipment. This warranty is
extended only to the original purchaser, when purchased through an
authorized reseller. A purchase receipt, invoice, or other proof of
original purchase date will be required before warranty repairs are
provided.
Mail in service can be obtained during the warranty period by calling
(714) 424-6500. A Return Authorization number must be obtained
in advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact
Channel Vision Technology, your dealer or any factory-authorized
service center.
Channel Vision products are not intended for use in medical,
lifesaving, life sustaining or critical environment applications.
Channel Vision customers using or selling Channel Vision products
for use in such applications do so at their own risk and agree to fully
indemnify Channel Vision for any damages resulting from such
improper use or sale.
www.chann e l v i s i o n . c o m
234 Fischer Avenue, Costa Mesa, California 92626 USA
(714)424-6500 (800)840-0288 (714)424-6510 fax
1
ST-2000
ST-2100
P-0930
CAT5Whole-HouseIntercomSystem
PRO
PRO
13
Hub
A
B
C
D
PRO
C
V
H A N N E L
I S I ON
TM
Model
P-0930
Whole-HouseIntercom
Link
In
Link
Out
Room1 Room2
Room3
Room4
Room5
Room6
PageOut
Page Trigger
IR
Emitters
+15VDC
Power
Mon/Talk
DND
Ans/End
Page/Lstn
2
Features:
!
!
!
!
!
!
!
!
Directcommunicationfromroomtoroom
Expandableupto24stations
BabyMonitorandDoNotDisturbmodes
Built-inIRrepeating
IntercomcallscanbeactivatedwithanIRremotecontrol
Whole-housepaging
Twodistinctdoorchimes
Answerfunctioncallsthelaststationthatpaged
P-0930
Hub
TheChannelVisionCAT5Whole-HouseIntercomSystemconsistsoftwo
basiccomponents:P-0930IntercomHubandST-2000IntercomStation.
Thesystemcanbeexpandedthroughtheuseofadditionalhubsand
intercomstations. TheST-2000providesdirectcallbuttonsfor6rooms.
TheST-2100IntercomStationExpandercanbeusedtoaddmoredirectcall
buttonsinlargersystems.Ifafrontdoorintercomstationisrequired,
ChannelVision’spopularIU-xxxxCorDP-xxxxCcanbeeasilyintegratedas
oneoftheintercomstations,andwhenusedwiththeST-C5IDSDoorStrike
Relaymodule,thesystemcanactivateanelectronicdoorstrikeorgate
opener.
LinkOut
Connectsto Link
In onanotherunit
forsystem
expansion
Power
Connectpower
supplyhere
IREmitters
ConnectIRemittershere
PageTrigger
Supplies12VDCtriggervoltageforanexternalaudiosystem
PageOut
Connecttotheinputofanexternalaudiosystem
HubSwitches
Usetoconfigurethehub’sidentity
PRO
C
V
H A N N E L
I S I ON
TM
Model
P-0930
Whole-HouseIntercom
PageOut
Page Trigger
IR
Emitters
+15VDC
Power
Link
In
Link
Out
Hub
A
B
C
D
Room1 Room2
Room3
Room4 Room5
Room6
11
StrippingandConnectingCAT5Wire
Specifications:
OperatingTemperature:
(typical@25ºC)
-10ºCto+50ºC
OperatingVoltage:
CableRequirements:
RecommendedMax.CableLength:
DoorStation:
WallStation:
IRFreq.rangesupported(ST-2000):
IRpickuprange(ST-2000):
15VDC
4pairUTP (CAT3orbetter)
500ft
350ft
30kHz-60kHz
40ft.@38kHz,25ft.@56kHz
Specificationssubjecttochangewithoutnotice.
Blade
CAT5
1. PlacetheCAT5betweenthebladeandthefirstnotchoftheJ-110tool.
CAT5cableshouldbestrippedwithaproperstrippingtool,suchasChannel
Vision’sJ-110tool.
Slight
pressure
Rotate
1turnonly
2. Rotatethetoolonlyonce.Multiple
turnswillcauseyoutocutintothe
innerwires.
3. Inspecttheinnerwiresfordamage.
Ifanywiresarecutstartoveratstep1.
Checkfordamage
Green/White
Green
Orange/White
Blue
Blue/White
Orange
Brown/White
Brown
TIA-568A RJ-45 Modular Plug
Side view:
Top view:
1)BesureyouhaveconnectedtheCAT5cablecorrectly.Followthe
colorcodeindicatedonthe110connectorsandusethe TIA-568A
colorstandardonanyRJ-45connectorsinthesystem.Mis-wiringwill
preventthesystemfromworking!
2)Havingtroublecallingfromroomtoroom?
A.Lookatthestatus LEDsontheST-2000.Dotheyfunctionas
indicatedinthechartbelow?
B.LookattheIRLEDontheP-0930whilepressingoneofthecall
buttonsontheST-2000.Itshouldflashwhenbuttonsarepressed.
Nowgototheroomyouaretrying tocallandrepeattheteston
thatST-2000.IftheLEDflashesbothtimes,thenIRcontrol
signalsarebeingtransferredfromtheintercomstationstothehub.
3) TroublewithIRcontrol?
a.Ifyourehavingtroublecontrollingthesystemwiththe A0503remote,
makesureyouhavefreshbatteriesinstalled.Makesureyoucan
controlthesystembypressingthebuttonsontheST-2000.See
troubleshootingstep2b.
b.IfyourehavingtroubleoperatinganIRcontrolleddevicewhenusing
theintercom’sIRrepeatingsystem,checktheIRLEDontheP-0930
tomakesureitflasheswhentheIRsignalsaredetectedbytheST-
2000.DoublechecktheIRemittertoensurethatitislocateddirectly
overtheIRsensorofthedevice.DoestheIRrepeatingsystem
controlsomedevicesbutnotothers?ChecktheIRspecificationsin
themanualtomakesureyourdeviceiscompatiblewiththisIR
repeatingsystem.
4)Ifthe systemisnotresponding,pressandholdthe Ans/Endbutton
for5seconds. Thiswillcauseittoreboot.
5)Checkthepowersupplyvoltageonthepowersupply.Itshouldbe15
voltsDC.
ConnectionTipsandTroubleshooting
10
DNDLED
color
- -
Off/Standby
Red
-
DND
Green
-
Onacall
Orange
-
Ring-onlyDND
-
Red
RoombeingMonitored
-
Green
MonitorOut/Page/Tone
Orange(Green)
Push-To-Talkmode(DoortoRoom)
Meaning
ST-2000LEDStatusIndicators
Mon/TalkLED
color
3
ST-2000
IntercomStation
ST-2100
StationExpander
Basicintercomfunctionbuttons
Seedescriptionbelow
IRReceiver
DetectsIRfromremotecontrols
Volumeup/down
ControlsvolumeoftheST-2000
DirectCallbuttons
AllowRoomtoRoomCalling
Howitworks:
:
Page/Lstn
DND
Ans/End
Mon/Talk
Push-To-TalkMode:RoomtoRoom
Push-To-TalkMode:RoomtoDoor
Push-To-TalkMode:DoortoRoom
Everyintercomzone(orroom)willhaveatleastoneST-2000whichwillprovidedirectcallaccess
tothefirst6rooms.Forlargersystems(upto24zones),modelST-2100canbeaddedtoallow
directcallaccesstomorezones.Note:largersystemswillalsorequiretheadditionofmoreP-0930
intercomhubs.
-Press Page/Lstn tocallallotherstationsinthesystem.Note:Pressing Ans/End
willmuteanincomingpage.
-Pressoncetoenterthe ringonlymode(LEDturnsOrange).Inthismodeotherstationscan
ringyou,butyoumustpress Ans/Endtoacceptthecall.Pressthebuttonasecondtimeandthe
LEDturnsRed,nowotherstationswillhearabusytonewhentheycallyourstation.
-Pressthisbuttonto:1)Callbackthestationthatjustpaged,2)Answeradoorstation
call,3)Answeradirectcallwhenintheringonlymode,4)Pressthisbuttonagaintoendthecall.
-1)Pressandholdthisbuttonfor2seconds(LEDturnsRed)toallowyourstationtobe
monitoredfromotherstations,2)Pressandrelease(LEDturnsGreen)tolistentoanotherstation
thatisinmonitormode.Note:Roomsbeingmonitoredwillnothearanypages.Pressing Ans/End
willreleaseastationfrommonitormode.
(fornoisyenvironments)- Thissystemnormallyoperatesin
a hands-free modesothepersonrespondingtoadirectintercomcallcansimplyspeakandthe
ST-2000automaticallydetectswhenthepersonhasfinishedspeaking.However,ifthereis
significantbackgroundnoise,theST-2000willnotdistinguishbetweenvoiceandbackgroundnoise.
Inthiscase,pressandholdthe Mon/Talkbutton(LEDturnsOrange)thiswilloverridethe
automaticvoiceswitchingandallowthepersonholdingthe Mon/Talkbuttontobeheardinthe
otherroom. Afterthecall,thesystemwillrevertbackto hands-freemode.Note:thepush-to-talk
modeonlyoccurswhenacallhasbeeninitiatedbetweentwolocations.Ifacallisnotalreadyin
progress,pressingandholdingthe Mon/Talkbuttonwillengagethemonitormodeasdescribed
above.
-Holddownthe Mon/Talkbuttonwhilespeakingtoadoor.
TheLEDturnsOrange.
-Holddownthe Page/Lstnbuttontohearthepersonatthe
doorstationspeakingtoyou. TheLEDturnsGreen.
Functions
Mon/Talk
DND
Ans/End
Page/Lstn
4
Basic Application
PRO
C
V
H A N N E L
I S I ON
TM
Model
P-0930
Whole-HouseIntercom
PageOut
Page Trigger
IR
Emitters
+15VDC
Power
Link
In
Link
Out
Hub
A
B
C
D
Room1 Room2
Room3
Room4 Room5
Room6
Inabasic6roomsystem,anyST-2000stationiscapableofcalling
anotherstationdirectly,simplybypressinganyofthe6directcall
buttons. Thetopdirectcallbuttoncorrespondstoroom1,thesecond
buttoncorrespondstoroom2andsoon.
Theintercomstationscanbeactivatedfromacrosstheroombyusing
the A0503IRremotecontrol,allowingyoutomakeanintercomcall
whilesittinginyourfavoritechair. TheIRreceiverthatisintegrated
withtheST-2000canalsobeusedtosendIRsignalsbackto
componentsinadifferentroom,suchasDVDplayersormedia
servers.
ThePageOutfeatureontheP-0930enablesintercompagestobe
broadcasttoanexternalaudiosystem.Manyaudiosystemsthat
provideapageinputforthispurposealsorequireatriggervoltageto
activatethepagingfunction. TheP-0930providesa3.5mmPage
Triggerjackthatsupplies12VDCforthedurationoftheintercom
page.
Mon/Talk
DND
Ans/End
Page/Lstn
ConnectIRemittershereto
controlotherdevices
Connecttotheinputofan
externalaudiosystem
Mon/Talk
DND
Ans/End
Page/Lstn
Mon/Talk
DND
Ans/End
Page/Lstn
Mon/Talk
DND
Ans/End
Page/Lstn
Mon/Talk
DND
Ans/End
Page/Lstn
Mon/Talk
DND
Ans/End
Page/Lstn
UsingthePageOutFunction
9
OnemajorbenefitoftheCAT5Whole-HouseIntercomSystemisthat
manydifferentcomponentscanbeintegratedwithit. Thesystembelow
integratesPageOutfeatureoftheP-0930withthelocalaudioinputon
theP-10141x4CAT5 AudioDistributionModule.Whenapageissent
fromtheP-0930itwillinterruptthemainaudiosourcefeedingtheP-1014
sothepagewillbeheardthroughtheaudiosystemsspeakers. Thisisa
greatwaytomakepagesaudibleinareaswherethereisnoST-2000
intercomstation.
14 AUDIODistributionModule
Model
P-1014
+24VDC
Power
+12VDC
Status
System
System
Input
Local
Input
Zone1 Zone2 Zone3 Zone4
Expansion
Output
Local
Priority Signal
L
R
Emitters
IR
x
P-1014
AB-124
AmplifiedKeypad
Bathroom
Hallway
Kitchen
DiningRoom
Source
C VHA NNE L I SIO N
Pwr
Source
C VHA NNE L I SIO N
Pwr
Source
C VHA NNE L I SIO N
Pwr
Source
C VHA NNE L I SIO N
Pwr
P-0930
ST-2000
PRO
C
V
H A N N E L
I S I ON
TM
Model
P-0930
Whole-HouseIntercom
PageOut
Page Trigger
IR
Emitters
+15VDC
Power
Link
In
Link
Out
Hub
A
B
C
D
Room1 Room2
Room3
Room4 Room5
Room6
Room1
Room2
Room3
Room4
Room5
Room6
Room7
Room8
Room9
Room10
Room11
Room12
By C VHA NNE L I SIO N
TM
AUDIO
L
R
STATUS
12VDC
AB-202
A-BUSOUTPUT
STATUS
IR
IREMITTERS
AB-202
Input
Module
RCA Y
cable
Satradio
DVDplayer
CDplayer
Receiver
Mon/Talk
DND
Ans/End
Page/Lstn
8
InstallingtheST-2100StationExpander
ST-2000
RearView
ST-2000
RearView
ST-2100
RearView
SlideST-2100in
placeandaddscrews
U to
installanadditionalST-2100.
Adding2or3ST-2100sis
similar,simplyfollowthesame
procedure.
sethisexpansionslot
Theintercomsystemcanbeexpandedtomorethansixstationsby
addingtheST-2100totheST-2000. AlthoughseveralST-2100
expanderscanbeattachedtoeachST-2000,everythingstillattachesto
astandarddoubleganglow-voltagering. TheST-2100isveryslimsoit
attachestothesideoftheST-2000andsitsonthesurfaceofthewall.
IMPORTANT: Holeinthisbottombracketmustfitoverplasticboss.
(Metalmustnotsitontopofplastic.Orbuttonfunctionsmaybeaffected.)
Removethesescrews
Removethesescrews
St-2000asshipped
Discardwashers
Discardwashers
EdgeconnectorforST-2100
ExpandingtheSystem
Hub A
Room A1 RoomB1
These6buttons
callrooms
connectedto
hubB.
These6buttonscall
roomsconnectedto
hub A.
HubB
5
PRO
C
V
H A N N E L
I S I ON
TM
Model
P-0930
Whole-HouseIntercom
PageOut
Page Trigger
IR
Emitters
+15VDC
Power
Link
In
Link
Out
Hub
A
B
C
D
Room1 Room2
Room3
Room4 Room5
Room6
PRO
C
V
H A N N E L
I S I ON
TM
Model
P-0930
Whole-HouseIntercom
PageOut
Page Trigger
IR
Emitters
+15VDC
Power
Link
In
Link
Out
Hub
A
B
C
D
Room1 Room2
Room3
Room4 Room5
Room6
Room1
Room2
Room3
Room4
Room5
Room6
Room7
Room8
Room9
Room10
Room11
Room12
Room1
Room2
Room3
Room4
Room5
Room6
Room7
Room8
Room9
Room10
Room11
Room12
Whenexpandingthesystemtomorethan6rooms,connecttheLink
OutfromP-0930totheLinkInofanotherP-0930usingthesmall
ribboncableprovided. Asmanyas4P-0930intercomhubscanbe
linkedtogethertocreatea24-roomsystem. Thedipswitcheslocated
neartheLinkInconnectoralloweachhubtobeidentifiedbyaletter,
suchas A,B,C,orD.Eachstation,canacceptupto3ST-2100
stationexpanders(seepage3). The6roomcallbuttonsontheST-
2000arealwaysassociatedwithhub A. The6roomcallbuttonson
thefirstST-2100areassociatedwithhubB,the6roomcallbuttons
onthesecondST-2100areassociatedwithhubC,andthe6room
callbuttonsonthethirdST-2100areassociatedwithhubD.
ThedefaultdipswitchpositionsetstheP-0930as
unit A.thismeansthatbothdipswitchesareinthe
downor offposition.Whencreatinglarger
systems,makesurethedipswitchesare
configuredproperly.
Mon/Talk
DND
Ans/End
Page/Lstn
Mon/Talk
DND
Ans/End
Page/Lstn
6
InstallingtheST-2000
1.Installastandarddoublegang
low-voltagering
2. AttachtheST-2000mounting
brackettothelow-voltagering
Note:thesetabsareontop
Note:thesehookswillalignwith
thetabsatthetopofthebracket
Note:WhenaddingST-2100
SationExpandersmovethe
endcovertothelast
ST-2100
3.PulltheCAT5wirethrough
theopeningandterminate
ittothebackside
oftheST-2000
5.Hangfromtop
4.Slidetheendcover
intoplacefromthe
backsideofthe
ST-2000
Endcover
installed
androtatedown
6. Tightenscrewtolockinplace
Mon/Talk
DND
Ans/End
Page/Lstn
Mon/Talk
DND
Ans/End
Page/Lstn
CustomizingRoomLabels
7
Pushheretoreleasethe
labelcover
Thelabelcovershould
nowswingoff
Replacethelabels
Usetweezersifneeded
Replacethelabelcover
Mon/Talk
DND
Ans/End
Page/Lstn
Theroomlabelsontheintercomstationscanbecustomizedtohelp
theuserrememberwhichbuttonscorrespondtowhichroom.For
example,insteadofhavinglabelsthatsay:Room1,Room2,Room
3,etc.youcanlabelthoseroomsas:Kitchen,Bedroom,Bathroom,
etc. Tocreatepaperlabelsoftheappropriatesize,youcan
downloadalabeltemplatefromwww.channelvision.comthatwill
allowyoutocreatecustomlabelsandprintthemonstandard8.5x
11paper. Thenusescissorstocutalongthetemplateguidelines.
Toinstallthecustomlabels,followthesimplestepsbelow:
Mon/Talk
DND
Ans/End
Page/Lstn
Mon/Talk
DND
Ans/End
Page/Lstn
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Channel Vision ST-2000 User manual

Category
Door intercom systems
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI