TO ACHIEVE OPTIMUM PERFORMANCE, IT IS HIGHLY RECOMMENDED THAT YOU READ
THIS INSTALLATION GUIDE BEFORE INSTALLATION.
Congratulations on your purchase of VM Audio equipment, you have purchased a
quality product designed and engineered in America. Through years of experience, we
have created a wide range of audio products and have incorporated the latest tech-
nology in the design and manufacturing process. VM Audio is proud in bringing you
these products and we are certain that they will give you years of listening pleasure.
The newest addition to the VM Audio line of loudspeakers include the VAS4210P,
packing convenience and application exibility into the ultra compact and high
output series. The VAS4210P is a 10” 4-way full range passive loudspeaker system
designed for contractor and sound reinforcement applications such as corporate
events, small or medium sized live events, performing art venues, houses of worship,
retail businesses, ball rooms, and theme parks. The VM Audio Shaker Series is the
perfect solution for a broader platform in loudspeaker applications while keeping
quality and reliability in mind.
< < ATTENTION > >
Continuous, excessive exposure to sound pressure levels in excess of 85dB’s can cause a loss
in hearing. While VM Audio Systems are capable of producing sound pressure levels greater
than 85dB’s, they are also designed for enjoyment at reasonable levels. Please observe all
local sound ordinances while listening to your VM Audio Sound System.
INTRODUCTION
VAS4210P 550 RMS
Wattage
Performance
More
0 100 550 1100 1550
Ideal
Less
FEATURED SPECIFICATIONS
10” 4-Way Passive Loudspeaker System
High Power Loudspeaker
Continuous Power: 550 Watts
Peak Power: 1100 Watts
System Impedance: 8 Ohms
2-Way High Eciency Horn Tweeters
Computer Engineered Heavy Duty MDF Enclosure
High Output System Design
Computer Tuned Bass Reex Enclosure
Heavy Duty Aviation Carpet
Black Edge Corner Guards
Strong Steel Grills
Heavy Duty Designed Handles
Durable Push Terminals
Overload Protection Circuitry
Sensitivity: 90dB
Frequency Response: 33 Hz – 20 kHz
APPLICATIONS:
Night Clubs
Home Entertainment
Seminars
House of Worship
Stadiums
Resorts
Airports
PHYSICAL MEASUREMENTS
POWER CHART
A
C
B
(A) Width of Box
12.4 inches
315 mm
32.68 inches
830 mm
8.27 inches
210 mm
(B) Height of Box
(C) Depth of Box
SYSTEM DESIGN
www.vmaudio.com
VAS4210P
10” 4-Way Passive
Loudspeaker System
SHAKER SERIES
Installation Manual
HAVING TROUBLE INSTALLING?,
GIVE US A CALL OR EMAIL US
WE WILL BE GLAD TO HELP YOU
USA or Canada
(855) AUDIO-99 / (855) 283-4699
PLEASE DO NOT RETURN PRODUCT TO STORE
VAS4210P
10” 4-Way Passive
Loudspeaker System
SHAKER SERIES
Warning: If you hear a pop caused by the speaker over-exerting, lower the volume and or adjust the gain
control on the amplier to prevent damage to the speaker.
The Drivers
This loudspeaker system features an ecient, high powered, low frequency, dual 10” woofer
drivers with high output capability, while it also features a unique ecient horn loaded
2-Way high frequency tweeter. With the combination of these three drivers this speaker
system that is capable of very high output throughout the full frequency range even when
using low powered ampliers.
The Enclosure
Housing the two ecient drivers is a cabinet constructed of high quality MDF wood. It was
designed using the latest in loudspeaker computer software to model and skillfully tune the
cabinet to the optimum tuning frequency to achieve the best performance possible.
To nish and protect the cabinet, a high resisting aviation grade type carpet is used on all
six sides not only for outdoor/indoor use but to also give it that professional look and feel.
To further protect the enclosure, black edge corner guards are used on all corners of the
cabinet to avoid carpet damage or corner wood “chipping” in the event the enclosure is
toppled or hit.
For woofer protection, custom made perforated steel grills are installed for the daily day-to-
day harsh abuse. Convenient heavy duty high grade handles are also featured and built into
the cabinet to assist with everyday lifting, moving or installation.
The Crossover
This 4-way system is a passive loudspeaker system, meaning it uses an internal crossover
lter that directs certain frequencies to each speaker to more eectively reproduce the full
audio frequency spectrum when all speaker drivers are combined and put together as a
complete system. This simply means no electronic crossovers are needed to direct specic
frequencies to each speaker and only an amplier is required to get the complete sound
output.
Summary
From design, quality and nish look, the VAS4210P makes an excellent choice for a wide
variety of applications. Thanks to its 5-way gold plated binding post connector this profes-
sional loudspeaker system will be a snap to install with most systems and provide many
years of reliable service.
SYSTEM DESIGN
VAS4210P INSTALLATION
The VAS4210P is a professional loudspeaker system used for sound reinforcement applica-
tions. Its ability to reproduce high output sound levels is ideal for use in large venues and DJ
type situations. These simple steps will help you install the speaker cabinet into your own
sound system.
Step 1 - Place each cabinet on a solid level surface where they cannot be toppled or tilted.
Step 2 - Identify the speaker output channels on the amplier and choose the appropriate
channel output on the amplier where you will connect the VAS4210P. Also note the polarity
of the amplier channel output.
Step 3 - Take one end of the speaker cable and connect each wire to it's appropriate polarity
on the chosen amplier channel output.
Step 4 - Finally, obtain the other end of the speaker cable and connect each wire to it's appro-
priate polarity connector located behind each of the VAS4210P enclosure.
Note: It is important for all the wires to be connected correctly in order to preserve appropri-
ate sound integration.
TROUBLESHOOTING GUIDE
PROBLEM
NO AUDIO
Source unit
volume is turned
down or Muted
Speaker leads
shorted
Speakers not
connected or
blown
No Audio from
speaker box
Turn volume up slowly or turn Mute O
Check speaker continuity using a multimeter
Check speaker connections at
amplier and at speakers
Disconnect speakers at amplier and mea-
sure the impedance with multimeter
Check stereo source unit as well as the
amplier
Check to make sure that speaker
wires are securely connected to the
terminals
Double check to make sure that the
amplifer is stable to the ohm load you
are providing
CAUSE
ACTION
Gain may not be
properly set
DISTORTED AUDIO
Check each individual audio component
(mixer, eq, amp,) for correct gain adjustment.
Inspect each speaker cone for signs
of damage (frozen cone, burnt smell,
separated or ripped surround or
separated spider)
Speaker cone may
be damaged
HAVING TROUBLE INSTALLING?
GIVE US A CALL OR EMAIL US
WE WILL BE GLAD TO HELP YOU
USA or Canada
(855) AUDIO-99 / (855) 283-4699
PLEASE DO NOT RETURN PRODUCT TO STORE
/
