Insignia NS-32E859A11 is a 32-inch LED-LCD connected TV that offers a wide range of features for an enjoyable entertainment experience. With its built-in Wi-Fi and Ethernet connectivity, you can access your favorite streaming apps and browse the internet seamlessly. The TV also boasts multiple ports, including HDMI, component, and composite, allowing you to connect various devices such as DVD players, gaming consoles, and cable boxes. In addition, the TV features a user-friendly interface and comes with an Insignia universal remote control for easy control of all your connected devices.
Insignia NS-32E859A11 is a 32-inch LED-LCD connected TV that offers a wide range of features for an enjoyable entertainment experience. With its built-in Wi-Fi and Ethernet connectivity, you can access your favorite streaming apps and browse the internet seamlessly. The TV also boasts multiple ports, including HDMI, component, and composite, allowing you to connect various devices such as DVD players, gaming consoles, and cable boxes. In addition, the TV features a user-friendly interface and comes with an Insignia universal remote control for easy control of all your connected devices.
32" & 42" 120Hz 1080p LED-LCD Connected TV
QUICK SETUP GUIDE
NS-32E859A11 / NS-42E859A11
Thank You!
Enter into the connected world! Your Insignia LED-LCD
Connected TV is constructed with high quality
components and assembled with precision to oer
consumers the best picture possible and easy
access to your favorite online movies, music, TV shows,
web videos and other web content.
Quick Setup Guide
How to set up your TV
Installing the stand
1 Carefully place your TV screen face-down on a cushioned,
clean surface to protect the screen from damages and scratches.
2
Attach the stand neck to the stand base and secure it with four screws.
3
Align the stand on the TV , then insert the metal tabs on the stand
into the designated slots on the TV base and secure it with four screws.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned,
clean surface to protect the screen from damages
and scratches.
2 Secure the wall-mount bracket to the back of your
TV using the screws provided with the bracket.
How to connect the TV to your home network
Your TV can be connected to your wired network using the Ethernet port on the back of your TV or using a wireless network.
Using a wired network provides the best performance, because the attached devices connect directly to the network and are
not subject to radio frequency interference.
Connecting to the Internet with a wired network:
1 Connect a network cable to the ETHERNET jack on the back of your TV and into a wired router using an
Ethernet cable (Cat 5 or better, with RJ45 connectors).
Once you have your TV connected thru the Ethernet jack your TVshould be connected automatically. If you are
having issues with setting up the connection to your TV please go to your User Guide and look at
"Conguring a wired connection".
Connecting to the Internet with a wireless network:
1 Set up your access point or wireless router (if not already set up).
2 Press TiVo. The Home screen opens.
3 Press
▼
to highlight Connect to the Internet, then press
►
or SELECT.
4 Press SELECT to go to network settings.
5 Press
▲ or ▼
to highlight Set up wireless network, then press SELECT.
6 Press
▲ or ▼
to select the Wireless network you wish to setup
Option 1- Yes, I have a WPS button
Option 2- Yes, I have a WPS and use a PIN
Option 3- No
If you are not using a WiFi Protected Setup (WPS) router select Option 3, which allows you to
connect using regular WiFi security, such as WPA2.
7 Press
▲ or ▼
to highlight the network you want, then press SELECT. If your network has a password,
enter the password.
8 Follow the on-screen instructions to complete the network setup.
NOTE: For information on conguring a wireless connection, see your User Guide.
ANT/ CABLE IN ETHERNET
COMPONENT / AV-IN
SPDIF
Y/ Video L R
ANT/CABLE IN ETHERNET
COMPONENT / AV-IN
SPDIF
Y/ Video L R
ANT/CABLE IN ETHERNET
COMPONENT / AV-IN
SPDIF
Y/ Video L R
Remote control
and 2 AA
batteries
Component cable
TV Neck Stand , TV Base, and 8 screws
Audio cable
Power indicator
GAMECH
Ambient light Sensor
Note:
Press (power) to turn on your TV. The power indicator turns blue.
Press again to put your TV in Standby mode. The power indicator turns red.
Remote
control
sensor
If your device has an HDMI
connection, we recommend that
you use the HDMI connection
to get the best picture
quality possible.
Connecting a DVD or Blu-ray DVD player, camcorder,
cable box, satellite receiver, or game station
Using an HDMI cable (best)
Connecting an antenna/cable wall jack
Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the back of your
TV and the RF OUT jack on the antenna.
ANT/ CABLE IN ETHERNET
COMPONENT / AV-IN
SPDIF
Y/ Video L R
Ethernet wall jack
Ethernet cable
Back of TV
Wireless
Router or
Access Point
LAN cable
GAMECH
Using Component cable (better)
G A M E
CHVOL
INPUT
MENU
Thank You!
Enter into the connected world! Your Insignia LED-LCD
Connected TV is constructed with high quality
components and assembled with precision to oer
consumers the best picture possible and easy
access to your favorite online movies, music, TV shows,
web videos and other web content.
Model Hole Pattern (H x V)
TV Stand Screw Size
NS-32E859A11 200 x 100 mm
NS-42E859A11
200 x 200 mm
M4 x L17 mm
M4 x L17 mm
Using Composite cable (good)
Cleaning cloth
How to access connected services
The only TV that combines the power of the Internet with the
legendary TiVo user interface, all in stunning HD. You’ll nd
entertainment from the Internet with just a few clicks of
your remote control. Now get what you want, when you want it.
With CinemaNow on your TV, you can rent some of your favorite movies
from the comfort of your couch. All you need is your Insignia remote.
Once you have a CinemaNow account from CinemaNow.com, grab some
popcorn and enjoy the show.
With Netix on your TV, if you have a Netix unlimited plan, you can
instantly watch thousands movies and TV episodes streamed from Netix
to your TV. Just add shows to your Netix instant Queue, and
start watching.
Pandora on your TV lets you choose exactly the music you want to hear
and creates personal Internet radio stations that play it for you. Just
enter a song title or band name that represents the kind of music you
want to hear, and Pandora will start a unique “Pandora station” that plays
music similar to it. Add variety by entering other titles and bands to your
station, and even more variety by creating multiple Pandora stations
(up to 100!).
Listen to what you want, when you want with Napster, the ultimate
online jukebox. Access instantly your choice of over 11 million
songs—anytime, anywhere. Kick back with ad-free
radio stations, recommendations, and Billboard® charts back to
1955. Create your own playlists for a customized listening
experience.
View your favorite Internet content on your TV with apps from
chumby industries.Tweet your friends, post a Facebook comment,
check the stocks, play photos from Photobucket and more!
Stay connected while watching your favorite shows.
Two-year limited warranty
Visit www.insigniaproducts.com for details.
Need additional help?
See your User Guide! This comprehensive guide
includes everything from basic how-to steps to more
advanced features.
Check out our online community forum at
www.insigniaproducts.com for helpful information
from other Insignia TV owners.
We’re here for you
www.insigniaproducts.com
For customer service, call:
877-467-4289 U.S.
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, MN USA 55423-3645
RFC#BBI0802114Q2
© 2011 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand names
are trademarks of their respective owners.
ENGLISH 11_0294
1 Make sure that you have:
• Installed the remote control batteries.
2 Press (power) to turn on your TV.
3 The Welcome screen opens. Press ▲ or ▼
to highlight Set up this TV (typical), then
press SELECT.
4
The Remote Control Connection screen
opens. Press and on your remote
control to pair the remote control. Press
SELECT when the RF Connection
Successful screen opens.
5 The Network Setup screen opens.
Press ▲ or ▼ to highlight your
network connection type, then press
SELECT and follow the on-screen
instructions to set up your network
and run the network speed test.
6 The Set Up Channels screen opens.
Press ▲ or ▼to highlight your
signal type, then press SELECT to start the
channel scan.
NOTE:
If you are using a cable or satellite
box and you have connected it to the TV
using a Coaxial (RF) cable, you should
select the Cable option.
If you use a cable
or satellite box, you do not need to scan
for channels.
7 If you connected to a network in
Step 5 and a software update is available,
the Update in Progress screen opens.
Follow the on-screen instructions to
install the software update.
8 The Date and Time Setup screen opens.
Press ▲ or ▼to highlight Set date and
time manually, then press SELECT and
follow the on-screen instructions to
set your time zone, daylight saving
option, and date and time.
9 The Congratulations screen opens.
Press TiVo to enjoy your new TV.
If you selected in step 6 Channel Scan to
skip the channel scan because you were
setting up a cable or satellite box, then you
will need to go and select the Video Input
Source for your TV. Press INPUT on your
remote to select the video input source.
How to set up your TV for the rst time
How to set up your Insignia remote control
Programming your Universal remote control
One of the great benets of the TV is Easy Remote Setup for your Insignia
universal remote control. You can program the mode buttons on your TV
remote control (DVD, STB, or AUX ) to control the corresponding device using
your TV remote control. Please Note: your remote must be in RF mode to use
the remote setup.
To program the mode buttons:
1 Press TiVo. The Home screen opens. Press▲or▼
to highlight Settings, then press ►or SELECT.
2 Press▲or▼to highlight Settings, then press ►or SELECT.
3 Press ▲ or ▼ to highlight Devices, then press ► or SELECT.
4 Press ▲ or ▼ to highlight Remote control Setup, then press ► or SELECT.
5 Press ▲ or ▼ to highlight which button you want to program on your
remote control, then press ► or SELECT.
6 Follow the on-screen instructions to nish remote setup.
Home
Settings
Connect to the Internet
Settings
Parental Controls
Check for updates
Account & system info
Help
Sleep timer
Remote Control Setup
DVD button
STB button
AUX button
Power button in TV mode
Volume button
Backlight
Reset all remote settings
Set up the DVD button on your
remote to control your device.
Settings
Audio
Channels & providers
Devices
Network
Recommendations
Video
Appearance
INlink HDMI control
De
v
ices
Set up the remote control to
control the devices that you use
with this TV, like your cable box,
DVR, or DVD player.
Source sensor
Remote control setup
TV power on
Reset device settings
Settings
Audio
Channels & providers
Network
Recommendations
Video
Appearance
Source sensor
Remote control setup
TV power on
Reset device settings
INlink HDMI control
Devices
10
Welcome
You are about to begin Guided Setup,which prepares the Insignia HD
TV for your use. This typically takes less than 45 minutes.
(If you skip Guided Setup now, you can set it up later by pressing TIVO
and choosing Settings > Help > Reset this TV > Repeat Guided
Setup.)
Network Setup
Set up wireless network
Use wired Ethernet instead
Skip this step, I don’t have a network
You are about to set up this TV to use your home network.
If you have a wired network, please plug an Ethernet cable into the
TV.
If you have a wireless network, DO NOT plug an Ethernet cable into
the TV.
Set Up Channels
Antenna
Cable (without a box)
Skip this step, don’t scan for channels
Update In Progress
Please wait...
Preparing
Connecting
Getting info
Disconnecting
Loading info
(Done)
(Done)
(Done)
(Done)
(38% complete)
Date and Time Setup
Use this date and time
Set date and time manually
The current date and time are:
12/12/2010 at 10:00 PM Eastern Standard Time
If the date and time are not correct, you may manually set them.
Congratulations!
Press TIVO to continue
You TV is now set up.
Press TIVO at any time to access the TV’s menu and On Demand shows.
Press LIVE at any time to watch television.
Enjoy your new TV!
Remote Control Connection
Cancel (use IR instead)
To set up your remote control to use RF (radio frequency) to
communicate with your TV, hold down the THUMBS UP and
THUMBS DOWN buttons at the same time for 5 seconds. This will
mean you won’t need to point the remote control directly at the TV.
H
old down the THUMBS UP and THUMBS DOWN buttons for 5 seconds
10:00pm
10:00pm
10:00pm
10:00pm
NOTE: For more information on "Programming your universal Insignia
remote control", see your User Guide.
Set up this TV(typical)
Set up in retail mode
Skip for now
Your TV works with either cable or antenna channels. Select the TV
signal you have connected to this TV. The TV will then begin
scanning for channels, which may take up to 30 minutes.
Note: You only need to scan for channels for cable if you are NOT
using a cable box. If you have a cable box (or satellite box), that
box already has information about your channels, and you can skip
this step.
MOBILE CODE
*Message and data rates apply
Get the mobile app by texting*
APP to 332211
1
Install the Best Buy Mobile App on
your phone
2
Launch the reader and hover the
phone over the code
3
This mobile code provides service and
support for this Insignia TV.
Follow these 3 easy steps:
-
1
-
2
Insignia NS-32E859A11 is a 32-inch LED-LCD connected TV that offers a wide range of features for an enjoyable entertainment experience. With its built-in Wi-Fi and Ethernet connectivity, you can access your favorite streaming apps and browse the internet seamlessly. The TV also boasts multiple ports, including HDMI, component, and composite, allowing you to connect various devices such as DVD players, gaming consoles, and cable boxes. In addition, the TV features a user-friendly interface and comes with an Insignia universal remote control for easy control of all your connected devices.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Insignia NS-WBRDVD User manual
-
-
-
-
Insignia NS-32E859A11 User manual
-
-
-
-
-
