![](//vs1.manuzoid.com/store/data-gzf/fdf4b237519c132f7c0b995b3206f742/2/002305414.htmlex.zip/bg5.jpg)
98 98
• Tap on the Network Map icon on the top left corner of the main screen
(for Android users the Map Icon is located on the bottom left corner) . You
should see at least two access points connected. This means that your SuperPod
is connected and successfully added to your WiFi Your Way™ Home network.
If you don’t see any connections, please stand near
the SuperPod and follow these steps:
• Tap on the menu icon on the bottom left corner of the main screen (for Android
users, the menu icon is located on the top left corner of the main screen) .
• Select the Adapt tab and tap on “Set up new pods” .
• The WiFi Your Way™ Home App will look for your pods
and automatically add them to your network.
• Tap “Done adding pods” .
Congratulations!
That’s it. You can now start enjoying your WiFi Your Way™ Home experience.
How to install your SuperPod
1. Open the WiFi Your Way™ Home App and sign in using the
email address associated with your Breezeline account .
2. Click on the verification link in the email you received from
accounts@plume.com. Then open the WiFi Your Way™ Home
App, tap the “Sign in” link and then tap on “Forgot your Password”.
The App will send a password reset link to the email address
provided. Once you update your password, your WiFi Your
Way™ Home account is ready to use, and you can sign in. .
3. Once you sign in, allow a few minutes for the WiFi Your
Way™ Home App to connect to your Gateway.
4. Connect and set-up your SuperPod.
• Identify the optimal location for your SuperPod
(see Installation Pro Tips).
• Plug your SuperPod into a Power Outlet.
Note: If you ordered additional SuperPods go to the Adapt Tab
and select “Set up new pods” to add them to your network.
Installing your SuperPod