1
Installation Instructions for
Hewitt 6 and 9 Light Chandelier
1.0
F3311-6_F3313-9
Chandelier
F3311/6, F3313/9
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for damp locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Feed the cord through the stem and screw the stem onto the fixture.
Install the candle tubes by slipping them over the sockets.
Install the candle followers by placing them on top of the candle tubes.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Install the shade over the lamp.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
2
1A
3
5
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
4
LAMP
4
CANDLE TUBE
SOCKET
CANDLE FOLLOWER
2
3
SHADE
STEM
5
6
1
6