Highwood AD-CNA36-BKE Operating instructions

AD-CNA36-BKE
Highwood
Brand
Highwood
Model
AD-CNA36-BKE
Type
Operating instructions
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Hamilton Counter Deck Chair
Assembly Guide
1) Insert (1) "A" Bolt into Lower Hole on Each Side to
Attach Seat to Back. Make Sure the Back is Fully Upright.
Make Bolts Snug, but Do Not Overtighten.
AD-CHCA2
03.05.19
A
x18
1/4"-20 x 1-3/4"
2) With the Chair Laying on its Left Side, Attach
the Right Leg to the Seat Using (3) "A" Bolts.
NOTE: Arm Goes on
Top of Back Support
A
A
SEAT
BACK
RIGHT LEG
A
SEAT
DETAIL A
SCALE 0.16 : 1
C
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 2 OF 2
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Hamilton Counter Deck Chair
Assembly Guide
AD-CHCA2
03.05.19
3) Attach Footrest to Right Leg Using (4) "A" Bolts.
4) Flip Chair and Lay on Right Side.
Repeat Steps 2 and 3 for Left Leg.
5) Attach Arms to the Back Using (2) "A" Bolts.
6) Tighten all Bolts. Enjoy your Highwood Chair!
Note: Footrest Faces Front of Chair
Note: Two Bolts Insert Here.
RIGHT LEG
A
FOOTREST
A
LEFT ARM
BACK
RIGHT ARM
A
A
  • Page 1 1
  • Page 2 2

Highwood AD-CNA36-BKE Operating instructions

AD-CNA36-BKE
Highwood
Brand
Highwood
Model
AD-CNA36-BKE
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents