1
Installation Instructions for
Temporarily install the mounting plate to the junction box.
Mark the anchor hole locations on the mounting plate and remove the mounting plate.
Drill appropriate size holes at the marked locations and install the anchors.
Secure the mounting plate to the junction box.
Screw the anchor screws into the anchors.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure it with the set screw using an Allen wrench.
Install the shade by placing it over the socket and into the shade base.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
1
2
3
1A
4
5
Pippin Wall
1.0
W 1853B
W 1853B
Wall
JUNCTION BOX
MOUNTING
PLATE
7
8
ALLEN KEY
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
6
7
SET SCREW
SHADE
ANCHOR
ANCHOR
SCREW
8
9
10
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
LAMP
11
SOCKET
SHADE BASE
10
9
11
3 5
Page is loading ...
Page is loading ...
SAVETHESE INSTRUCTIONS!
4
7400 Linder Ave, Skokie, 160077IL
800.969.3347
www.Feiss.com
© 2017 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Feiss WB1853CH Guide d'installation
- español: Feiss WB1853CH Guía de instalación
Related papers
-
Generation Lighting VS24001 Installation guide
-
Generation Lighting WB1825 Installation guide
-
Generation Lighting WB1843 Installation guide
-
Feiss F3021/3ORB Operating instructions
-
-
Generation Lighting WB1846CH Installation guide
-
-
Feiss F3227/10TXB/CH Installation guide
-
Generation Lighting WB1775ORB Installation guide
-
Generation Lighting WB1850 Installation guide
