Step 4:
Step 5:
Install the software
Step 6:
Choose the “Create a desktop shortcut” so that you can easily seeing
it on your PC Desktop
Step 7:
Finally Make sure install it successfully
Step 8:
Step 9:
Step 10:
Step 11:
Make sure install it successfully and Run uplink.exe in your computer,
(Mac OS does not compatible, Figure6.1 on manual).
Step 12:
Click the “uplink” software in your PC desktop and then when you seeing
this page that’s means you have installed this software successfully
Step 13:
Please press and hold any button Continuously and then plug into the
computer, release the button until the ANVEL AD510 Led screen displays
a message: "update mode". you needn't choose the update mode by
yourself ).
Step 14:
Click the “Check Update”(the Green one) to finish the update.
Step 15:
When the LD Display showing “Update Success”that’s means you already
upgraded this scan tool successfully, and then congratulations!
Step 16:
That’s all ? no, if you still can’t update this tool successfully,
please contact us with these email address: （ quick response within
12hours）
http://www.anceldirect.com/
m15170270423_[email protected]m
/
