Vello LRC-SE10 User manual

Brand: Vello

Model: LRC-SE10

Type: User manual

This manual is also suitable for

RAPID

LENS CHANGER

 

The Vello Rapid Lens

Changer oers speed,

convenience, and ﬂexibility

to make you more ecient

in the ﬁeld. Freeing you

from a bulky camera bag,

the small lens changer hangs

lightly at your side and

allows you to switch rapidly

between lenses without

disrupting your workﬂow.

THANK YOU FOR CHOOSING VELLO

• Please read and follow

these instructions, and

keep this manual in a

safe place.

• Handle this product

with care.

• Make sure everything

is secure before

proceeding.

• Clean this product with

only a soft, dry cloth.

• Use only parts provided

by the manufacturer.

• To avoid damage to

this product, be careful

not to overtighten or

improperly thread any of

the threaded ﬁttings.

• Make sure that this

product is intact and

that there are no missing

parts.

• All images are for

illustrative purposes only.

PRECAUTIONS

Lug

mounts

Lens release switch

Rapid Lens Changer Shoulder Strap

Tri-glide

length adjuster

Locking lens

mounts

Alignment dot

Snap hook

OVERVIEW

Note: Vello LRC-C10 includes two alignment dots for Canon EF and EF-S lenses.

• Rapid Lens Changer

• Shoulder Strap

• User Manual

CONTENTS

. Press the snap hook

of the shoulder strap

against the lug mount on

the Rapid Lens Changer

until it snaps into place.

2. Attach the other snap

hook to the opposite lug.

3. Adjust the strap to your

comfort with the tri-glide

length adjuster.

INSTALLING THE SHOULDER STRAP

. Align the dot on the lens

with the alignment dot

on the lens changer.

Note: For Canon, EF lenses

have a red alignment dot

while EF-S lenses have a

white alignment dot. Look

for the corresponding dot

on the lens changer.

2. Insert the lens and rotate

until it locks into place.

MOUNTING LENSES ONTO THE CHANGER

3. For the second lens,

repeat this process on

the opposite side of the

lens changer.

. Slide and hold the lens

release switch located on

the same side of the lens

changer as the lens that

you wish to release.

2. Rotate the lens to

remove.

REMOVING A LENS

SPECIFICATIONS

Dimensions (H × W × D) Weight Mount

LRC-C10

3" × 3.4" × .3"

(7.5 × 8.5 × 3.2 cm)

6.4 oz. (80 g) Canon EF/EF-S

LRC-N10

2.6" × 3." × .5"

(6.7 × 7.8 × 3.7 cm)

5.5 oz. (57 g) Nikon F

LRC-SE10

2.7" × 3.2" × .2"

(7 × 8. × 3. cm)

5.5 oz. (57 g) Sony E

0

This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship

under normal consumer use for a period of one () year from the original purchase date or thirty (30) days

after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited

warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails

during normal use of this product in its intended manner and in its intended environment. Inoperability of

the product or part(s) shall be determined by the warranty provider. If the product has been discontinued,

the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper

installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER

ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty

provides you with speciﬁc legal rights, and you may also have additional rights that vary from state to state.

ONE-YEAR LIMITED WARRANTY



To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise

authorization (“RMA”) number, and return the defective product to Vello along with the RMA number

and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.vellogear.com or call Customer Service at 22-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

VELLO is a registered trademark of the Gradus Group.

www.vellogear.com

All other trademarks are the property of their respective owners.

Vello LRC-SE10 User manual

Brand: Vello

Model: LRC-SE10

Type: User manual

This manual is also suitable for

Download PDF

report

Vello LRC-SE10 User manual

This manual is also suitable for

Vello LRC-SE10 User manual

Related papers

Other documents