Vello LRC-C10, LRC-N10, LRC-SE10 User manual

  • Hello! I am an AI chatbot trained to assist you with the Vello LRC-C10 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
RAPID
LENS CHANGER
 
2
The Vello Rapid Lens
Changer oers speed,
convenience, and flexibility
to make you more ecient
in the field. Freeing you
from a bulky camera bag,
the small lens changer hangs
lightly at your side and
allows you to switch rapidly
between lenses without
disrupting your workflow.
THANK YOU FOR CHOOSING VELLO
3
Please read and follow
these instructions, and
keep this manual in a
safe place.
Handle this product
with care.
Make sure everything
is secure before
proceeding.
Clean this product with
only a soft, dry cloth.
Use only parts provided
by the manufacturer.
To avoid damage to
this product, be careful
not to overtighten or
improperly thread any of
the threaded fittings.
Make sure that this
product is intact and
that there are no missing
parts.
All images are for
illustrative purposes only.
PRECAUTIONS
Lug
mounts
Lens release switch
Rapid Lens Changer Shoulder Strap
Tri-glide
length adjuster
Locking lens
mounts
Alignment dot
Snap hook
4
OVERVIEW
Note: Vello LRC-C10 includes two alignment dots for Canon EF and EF-S lenses.
5
Rapid Lens Changer
Shoulder Strap
User Manual
CONTENTS
6
. Press the snap hook
of the shoulder strap
against the lug mount on
the Rapid Lens Changer
until it snaps into place.
2. Attach the other snap
hook to the opposite lug.
3. Adjust the strap to your
comfort with the tri-glide
length adjuster.
INSTALLING THE SHOULDER STRAP
7
. Align the dot on the lens
with the alignment dot
on the lens changer.
Note: For Canon, EF lenses
have a red alignment dot
while EF-S lenses have a
white alignment dot. Look
for the corresponding dot
on the lens changer.
2. Insert the lens and rotate
until it locks into place.
MOUNTING LENSES ONTO THE CHANGER
3. For the second lens,
repeat this process on
the opposite side of the
lens changer.
8
. Slide and hold the lens
release switch located on
the same side of the lens
changer as the lens that
you wish to release.
2. Rotate the lens to
remove.
REMOVING A LENS
9
SPECIFICATIONS
Dimensions (H × W × D) Weight Mount
LRC-C10
3" × 3.4" × .3"
(7.5 × 8.5 × 3.2 cm)
6.4 oz. (80 g) Canon EF/EF-S
LRC-N10
2.6" × 3." × .5"
(6.7 × 7.8 × 3.7 cm)
5.5 oz. (57 g) Nikon F
LRC-SE10
2.7" × 3.2" × .2"
(7 × 8. × 3. cm)
5.5 oz. (57 g) Sony E
0
This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship
under normal consumer use for a period of one () year from the original purchase date or thirty (30) days
after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited
warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails
during normal use of this product in its intended manner and in its intended environment. Inoperability of
the product or part(s) shall be determined by the warranty provider. If the product has been discontinued,
the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty
provides you with specific legal rights, and you may also have additional rights that vary from state to state.
ONE-YEAR LIMITED WARRANTY

To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise
authorization (“RMA”) number, and return the defective product to Vello along with the RMA number
and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.vellogear.com or call Customer Service at 22-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
VELLO is a registered trademark of the Gradus Group.
© 206 Gradus Group LLC. All Rights Reserved.
www.vellogear.com
All other trademarks are the property of their respective owners.
© Copyright 206 Gradus Group GG1
/