Astro Pneumatic 1222 is a versatile and powerful tool that combines a heavy-duty 1/4" angle head die grinder and a standard duty 1/4" die grinder, providing users with the ability to tackle a wide range of grinding, cutting, and polishing tasks. Its compact and lightweight design, along with the composite handle that reduces vibration, ensures comfortable handling and precise control. The 1222's lever throttle allows for feathering control, enabling users to adjust the speed and intensity of the grinding process.
Astro Pneumatic 1222 is a versatile and powerful tool that combines a heavy-duty 1/4" angle head die grinder and a standard duty 1/4" die grinder, providing users with the ability to tackle a wide range of grinding, cutting, and polishing tasks. Its compact and lightweight design, along with the composite handle that reduces vibration, ensures comfortable handling and precise control. The 1222's lever throttle allows for feathering control, enabling users to adjust the speed and intensity of the grinding process.
23
24
22
28
21
20
19
18A
17
13
15
16
26
27
29
25
11P
12
14
10
9
31
2
32
3
4
5
6
7
1
11
11
26P
25P
18AP
www.astrotools.com
Unpacking
When unpacking, check the parts diagram and part number listing
on pages 4-5 to make sure all parts are included. If any parts are
missing or damage, please call your distributor.
•Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year (except where noted on our
price schedule) from the date of 1st use. Astro reserves the right to determine
whether the product failed because of defective material, workmanship or other
causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its
discretion, will repair products covered under this warranty free of charge. The
distributor should direct the original user to return the product (with the exceptions
listed below) with the distributor’s name, address, adequate proof of date of
purchase or a copy of warranty card, and a short note explaining the problem.
Failures caused by accident, alteration, or misuse are not covered by this
warranty.
•Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user and
may not be transferred to subsequent owners.
•This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030
1 YEAR LIMITED WARRANTY
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
1-800-221-9905 FOR INSTRUCTIONS
Product: 1222 Manual
Dimension: 8.5"x 11"/page
Date: 2007/06/01
Color:
1222 1222
• Composite handle reduces vibration
• Rib textured handle provides a firm grip
• Lever throttle for feathering control
• Compact and lightweight
• Front exhaust
• Built-in regulator
Collet Size: 1/4"
Free Speed: 20,000 rpm
Overall Length: 5" (127mm)
Net Weight: 1lbs. (.45kg)
Motor: 1/3hp
Air Inlet Thread NPT:
Air Hose I.D. Size: 3/8" (10mm)
Avg. Air Consumption: 3cfm
Air Pressure: 90-120psi
Sound Pressure: 92.3 db(A)
Sound Power: 103.7 db(A)
1240 - Blue Composite Body 1/4" 90° Angle Die Grinder
1240 SPECIFICATIONS:
1206A SPECIFICATIONS:
• Rear exhaust air flow system directs air away from work surface
• Compact and lightweight
• Built-in regulator
• Safety lever
Collet Size: 1/4"
Free Speed: 22,000 rpm
Overall Length: 6-3/4" (171mm)
Net Weight: 1-1/8lbs. (.51kg)
Motor: 1/3hp
Air Inlet Thread NPT: 1/4"
Air Hose I.D. Size: 3/8" (10mm)
Avg. Air Consumption: 3cfm
Air Pressure: 90-120psi
1206A - Composite Body 1/4" Medium Die Grinder
Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
Page 4
1240
372 Old US Highway 52 South
Mount Airy, NC 27030
BLUE COMPOSITE BODY
1/4" 90° ANGLE DIE GRINDER
Black
Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
Page 5
1206A
372 Old US Highway 52 South
Mount Airy, NC 27030
COMPOSITE BODY 1/4"
MEDIUM DIE GRINDER
Page 2 Page 3
1222
SUGGESTED AIR LINE CONNECTION
23
24
22
18
28
21
20
19
18
17
13
15
16(A)
26
27
29
30
11
12
14
10
8
9
31
31P
2
32
3
4
5
6
7
33
33P
1A
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1240-1
T20AH-2
T20AH-3
T20AH-4
T20AH-5
T20AH-6
T20AH-7
T20AH-8
T20AH-9
T20AH-10
T20AH-11
T20AH-12
T20AH-13
T20AH-14
T20AH-15
T20AH-16
T20AH-17
Motor Housing
Throttle Valve
Throttle Valve Spring
Air Regulator
Regulator O-Ring
Valve Screw O-Ring
Valve Screw
Safety lever
Throttle Lever Pin
Ball Bearing
Rear End Plate
Dowel Pin
Rotor Collar
Cylinder
Rotor
Rotor Blade
Front End Plate
1A
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Index
No.
1240
BLUE COMPOSITE BODY 1/4"
90° ANGLE DIE GRINDER
1206A
COMPOSITE BODY 1/4"
MEDIUM DIE GRINDER
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
1
1
1
1
1
1
1
1
1
2
1
1
1
1
4
1
1
T210-1
T210-2
T210-3
T210-4
T210-5
T210-6
T210-7
T210-9
T210-10
T210-11
T210-11P
T210-12
T210-13
T210-14
T210-15
T210-16
T210-17
Angle Ended Spanner
Double Ended Spanner
Collet Nut
Collet
Housing Cap
Retainer
Spindle
Ball Bearing
Front End Plate
Pin
Pin
Cylinder
Spacer
Rotor
Rotor Blade
Rear End Plate
Ball Bearing
1
2
6
4
5
6
7
9
10
11
11P
12
13
14
15
16
17
Index
No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1206A-18
1206A-18P
T210-19
T210-20
T210-21
T210-22
T210-23
T210-24
T210-25
T210-25P
T210-26
T210-26P
T210-27
T210-28
T210-29
T210-31
T210-32
Housing
Housing Sleeve
Valve Screw
O-Ring
O-Ring
Air Regulator
Spring
O-Ring
Throttle Valve
O-Ring
Valve Bushing
O-Ring
Safety lever
Throttle Pin
Exhaust Deflector
Exhaust Washer
Inlet Bushing
18A
18AP
19
20
21
22
23
24
25
25P
26
26P
27
28
29
31
32
Index
No.
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
T20AH-18
T20AH-19
T20AH-20
T20AH-21
T20AH-22
T20AH-23
T20AH-24
T20AH-26
T20AH-27
T20AH-28
T20AH-29
T20AH-30
T20AH-31
T20AH-31P
T20AH-32
T20AH-33
T20AH-33P
Ball Bearing
Pinion
Cap Lock
Threaded Cap
Angle Head Housing
Ball Bearing
Spindle Gear
Woodruff Key
Spindle
Clamp Nut
Collet 1/4
",1/8",6mm,3mm
Collet Nut
Throttle Valve Bushing
Throttle Valve O-Ring
O-Ring
Spanner Wrench(L)
Spanner Wrench (S)
18
19
20
21
22
23
24
26
27
28
29
30
31
31P
32
33
33P
Index
No.
23
24
22
28
21
20
19
18A
17
13
15
16
26
27
29
25
11P
12
14
10
9
31
2
32
3
4
5
6
7
1
11
11
26P
25P
18AP
www.astrotools.com
Unpacking
When unpacking, check the parts diagram and part number listing
on pages 4-5 to make sure all parts are included. If any parts are
missing or damage, please call your distributor.
•Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year (except where noted on our
price schedule) from the date of 1st use. Astro reserves the right to determine
whether the product failed because of defective material, workmanship or other
causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its
discretion, will repair products covered under this warranty free of charge. The
distributor should direct the original user to return the product (with the exceptions
listed below) with the distributor’s name, address, adequate proof of date of
purchase or a copy of warranty card, and a short note explaining the problem.
Failures caused by accident, alteration, or misuse are not covered by this
warranty.
•Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user and
may not be transferred to subsequent owners.
•This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030
1 YEAR LIMITED WARRANTY
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
1-800-221-9905 FOR INSTRUCTIONS
Product: 1222 Manual
Dimension: 8.5"x 11"/page
Date: 2007/06/01
Color:
1222 1222
• Composite handle reduces vibration
• Rib textured handle provides a firm grip
• Lever throttle for feathering control
• Compact and lightweight
• Front exhaust
• Built-in regulator
Collet Size: 1/4"
Free Speed: 20,000 rpm
Overall Length: 5" (127mm)
Net Weight: 1lbs. (.45kg)
Motor: 1/3hp
Air Inlet Thread NPT:
Air Hose I.D. Size: 3/8" (10mm)
Avg. Air Consumption: 3cfm
Air Pressure: 90-120psi
Sound Pressure: 92.3 db(A)
Sound Power: 103.7 db(A)
1240 - Blue Composite Body 1/4" 90° Angle Die Grinder
1240 SPECIFICATIONS:
1206A SPECIFICATIONS:
• Rear exhaust air flow system directs air away from work surface
• Compact and lightweight
• Built-in regulator
• Safety lever
Collet Size: 1/4"
Free Speed: 22,000 rpm
Overall Length: 6-3/4" (171mm)
Net Weight: 1-1/8lbs. (.51kg)
Motor: 1/3hp
Air Inlet Thread NPT: 1/4"
Air Hose I.D. Size: 3/8" (10mm)
Avg. Air Consumption: 3cfm
Air Pressure: 90-120psi
1206A - Composite Body 1/4" Medium Die Grinder
Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
Page 4
1240
372 Old US Highway 52 South
Mount Airy, NC 27030
BLUE COMPOSITE BODY
1/4" 90° ANGLE DIE GRINDER
Black
Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
Page 5
1206A
372 Old US Highway 52 South
Mount Airy, NC 27030
COMPOSITE BODY 1/4"
MEDIUM DIE GRINDER
Page 2 Page 3
1222
SUGGESTED AIR LINE CONNECTION
23
24
22
18
28
21
20
19
18
17
13
15
16(A)
26
27
29
30
11
12
14
10
8
9
31
31P
2
32
3
4
5
6
7
33
33P
1A
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1240-1
T20AH-2
T20AH-3
T20AH-4
T20AH-5
T20AH-6
T20AH-7
T20AH-8
T20AH-9
T20AH-10
T20AH-11
T20AH-12
T20AH-13
T20AH-14
T20AH-15
T20AH-16
T20AH-17
Motor Housing
Throttle Valve
Throttle Valve Spring
Air Regulator
Regulator O-Ring
Valve Screw O-Ring
Valve Screw
Safety lever
Throttle Lever Pin
Ball Bearing
Rear End Plate
Dowel Pin
Rotor Collar
Cylinder
Rotor
Rotor Blade
Front End Plate
1A
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Index
No.
1240
BLUE COMPOSITE BODY 1/4"
90° ANGLE DIE GRINDER
1206A
COMPOSITE BODY 1/4"
MEDIUM DIE GRINDER
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
1
1
1
1
1
1
1
1
1
2
1
1
1
1
4
1
1
T210-1
T210-2
T210-3
T210-4
T210-5
T210-6
T210-7
T210-9
T210-10
T210-11
T210-11P
T210-12
T210-13
T210-14
T210-15
T210-16
T210-17
Angle Ended Spanner
Double Ended Spanner
Collet Nut
Collet
Housing Cap
Retainer
Spindle
Ball Bearing
Front End Plate
Pin
Pin
Cylinder
Spacer
Rotor
Rotor Blade
Rear End Plate
Ball Bearing
1
2
6
4
5
6
7
9
10
11
11P
12
13
14
15
16
17
Index
No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1206A-18
1206A-18P
T210-19
T210-20
T210-21
T210-22
T210-23
T210-24
T210-25
T210-25P
T210-26
T210-26P
T210-27
T210-28
T210-29
T210-31
T210-32
Housing
Housing Sleeve
Valve Screw
O-Ring
O-Ring
Air Regulator
Spring
O-Ring
Throttle Valve
O-Ring
Valve Bushing
O-Ring
Safety lever
Throttle Pin
Exhaust Deflector
Exhaust Washer
Inlet Bushing
18A
18AP
19
20
21
22
23
24
25
25P
26
26P
27
28
29
31
32
Index
No.
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
T20AH-18
T20AH-19
T20AH-20
T20AH-21
T20AH-22
T20AH-23
T20AH-24
T20AH-26
T20AH-27
T20AH-28
T20AH-29
T20AH-30
T20AH-31
T20AH-31P
T20AH-32
T20AH-33
T20AH-33P
Ball Bearing
Pinion
Cap Lock
Threaded Cap
Angle Head Housing
Ball Bearing
Spindle Gear
Woodruff Key
Spindle
Clamp Nut
Collet 1/4
",1/8",6mm,3mm
Collet Nut
Throttle Valve Bushing
Throttle Valve O-Ring
O-Ring
Spanner Wrench(L)
Spanner Wrench (S)
18
19
20
21
22
23
24
26
27
28
29
30
31
31P
32
33
33P
Index
No.
23
24
22
28
21
20
19
18A
17
13
15
16
26
27
29
25
11P
12
14
10
9
31
2
32
3
4
5
6
7
1
11
11
26P
25P
18AP
www.astrotools.com
Unpacking
When unpacking, check the parts diagram and part number listing
on pages 4-5 to make sure all parts are included. If any parts are
missing or damage, please call your distributor.
•Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year (except where noted on our
price schedule) from the date of 1st use. Astro reserves the right to determine
whether the product failed because of defective material, workmanship or other
causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its
discretion, will repair products covered under this warranty free of charge. The
distributor should direct the original user to return the product (with the exceptions
listed below) with the distributor’s name, address, adequate proof of date of
purchase or a copy of warranty card, and a short note explaining the problem.
Failures caused by accident, alteration, or misuse are not covered by this
warranty.
•Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user and
may not be transferred to subsequent owners.
•This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030
1 YEAR LIMITED WARRANTY
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
1-800-221-9905 FOR INSTRUCTIONS
Product: 1222 Manual
Dimension: 8.5"x 11"/page
Date: 2007/06/01
Color:
1222 1222
• Composite handle reduces vibration
• Rib textured handle provides a firm grip
• Lever throttle for feathering control
• Compact and lightweight
• Front exhaust
• Built-in regulator
Collet Size: 1/4"
Free Speed: 20,000 rpm
Overall Length: 5" (127mm)
Net Weight: 1lbs. (.45kg)
Motor: 1/3hp
Air Inlet Thread NPT:
Air Hose I.D. Size: 3/8" (10mm)
Avg. Air Consumption: 3cfm
Air Pressure: 90-120psi
Sound Pressure: 92.3 db(A)
Sound Power: 103.7 db(A)
1240 - Blue Composite Body 1/4" 90° Angle Die Grinder
1240 SPECIFICATIONS:
1206A SPECIFICATIONS:
• Rear exhaust air flow system directs air away from work surface
• Compact and lightweight
• Built-in regulator
• Safety lever
Collet Size: 1/4"
Free Speed: 22,000 rpm
Overall Length: 6-3/4" (171mm)
Net Weight: 1-1/8lbs. (.51kg)
Motor: 1/3hp
Air Inlet Thread NPT: 1/4"
Air Hose I.D. Size: 3/8" (10mm)
Avg. Air Consumption: 3cfm
Air Pressure: 90-120psi
1206A - Composite Body 1/4" Medium Die Grinder
Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
Page 4
1240
372 Old US Highway 52 South
Mount Airy, NC 27030
BLUE COMPOSITE BODY
1/4" 90° ANGLE DIE GRINDER
Black
Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
Page 5
1206A
372 Old US Highway 52 South
Mount Airy, NC 27030
COMPOSITE BODY 1/4"
MEDIUM DIE GRINDER
Page 2 Page 3
1222
SUGGESTED AIR LINE CONNECTION
23
24
22
18
28
21
20
19
18
17
13
15
16(A)
26
27
29
30
11
12
14
10
8
9
31
31P
2
32
3
4
5
6
7
33
33P
1A
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1240-1
T20AH-2
T20AH-3
T20AH-4
T20AH-5
T20AH-6
T20AH-7
T20AH-8
T20AH-9
T20AH-10
T20AH-11
T20AH-12
T20AH-13
T20AH-14
T20AH-15
T20AH-16
T20AH-17
Motor Housing
Throttle Valve
Throttle Valve Spring
Air Regulator
Regulator O-Ring
Valve Screw O-Ring
Valve Screw
Safety lever
Throttle Lever Pin
Ball Bearing
Rear End Plate
Dowel Pin
Rotor Collar
Cylinder
Rotor
Rotor Blade
Front End Plate
1A
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Index
No.
1240
BLUE COMPOSITE BODY 1/4"
90° ANGLE DIE GRINDER
1206A
COMPOSITE BODY 1/4"
MEDIUM DIE GRINDER
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
HEAVY-DUTY 1/4" ANGLE HEAD DIE GRINDER
& STANDARD DUTY 1/4" DIE GRINDER SET
1
1
1
1
1
1
1
1
1
2
1
1
1
1
4
1
1
T210-1
T210-2
T210-3
T210-4
T210-5
T210-6
T210-7
T210-9
T210-10
T210-11
T210-11P
T210-12
T210-13
T210-14
T210-15
T210-16
T210-17
Angle Ended Spanner
Double Ended Spanner
Collet Nut
Collet
Housing Cap
Retainer
Spindle
Ball Bearing
Front End Plate
Pin
Pin
Cylinder
Spacer
Rotor
Rotor Blade
Rear End Plate
Ball Bearing
1
2
6
4
5
6
7
9
10
11
11P
12
13
14
15
16
17
Index
No.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1206A-18
1206A-18P
T210-19
T210-20
T210-21
T210-22
T210-23
T210-24
T210-25
T210-25P
T210-26
T210-26P
T210-27
T210-28
T210-29
T210-31
T210-32
Housing
Housing Sleeve
Valve Screw
O-Ring
O-Ring
Air Regulator
Spring
O-Ring
Throttle Valve
O-Ring
Valve Bushing
O-Ring
Safety lever
Throttle Pin
Exhaust Deflector
Exhaust Washer
Inlet Bushing
18A
18AP
19
20
21
22
23
24
25
25P
26
26P
27
28
29
31
32
Index
No.
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
T20AH-18
T20AH-19
T20AH-20
T20AH-21
T20AH-22
T20AH-23
T20AH-24
T20AH-26
T20AH-27
T20AH-28
T20AH-29
T20AH-30
T20AH-31
T20AH-31P
T20AH-32
T20AH-33
T20AH-33P
Ball Bearing
Pinion
Cap Lock
Threaded Cap
Angle Head Housing
Ball Bearing
Spindle Gear
Woodruff Key
Spindle
Clamp Nut
Collet 1/4
",1/8",6mm,3mm
Collet Nut
Throttle Valve Bushing
Throttle Valve O-Ring
O-Ring
Spanner Wrench(L)
Spanner Wrench (S)
18
19
20
21
22
23
24
26
27
28
29
30
31
31P
32
33
33P
Index
No.
-
1
-
2
-
3
Astro Pneumatic 1222 is a versatile and powerful tool that combines a heavy-duty 1/4" angle head die grinder and a standard duty 1/4" die grinder, providing users with the ability to tackle a wide range of grinding, cutting, and polishing tasks. Its compact and lightweight design, along with the composite handle that reduces vibration, ensures comfortable handling and precise control. The 1222's lever throttle allows for feathering control, enabling users to adjust the speed and intensity of the grinding process.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Hitachi 93121601 Datasheet
-
Florida Pneumatic FPX-100 User manual
-
-
JET JAT-412 Owner's manual
-
-
Florida Pneumatic FPX-300 User manual
-
-
-
-
Dynabrade 49420 Safety, Operation And Maintenance
