AEM All CD-5 and CD-7 Dashes Operating instructions

AEM
Brand
AEM
Model
All CD-5 and CD-7 Dashes
Type
Operating instructions

AEM All CD-5 and CD-7 Dashes are powerful and versatile digital dashboards that provide drivers with a wealth of information and control over their vehicles. With a large, high-resolution display, these dashes can display a variety of data, including speed, RPM, fuel level, and coolant temperature. They also feature a number of customizable features, such as the ability to change the display layout, set warnings and alarms, and log data. Whether you're a professional racer or a weekend enthusiast, AEM All CD-5 and CD-7 Dashes can help you get the most out of your vehicle.

AEM All CD-5 and CD-7 Dashes are powerful and versatile digital dashboards that provide drivers with a wealth of information and control over their vehicles. With a large, high-resolution display, these dashes can display a variety of data, including speed, RPM, fuel level, and coolant temperature. They also feature a number of customizable features, such as the ability to change the display layout, set warnings and alarms, and log data. Whether you're a professional racer or a weekend enthusiast, AEM All CD-5 and CD-7 Dashes can help you get the most out of your vehicle.

SETUP GUIDE
This product is legal in California for racing vehicles only and should never be used on public
highways. AEM Performance Electronics, 2205 W. 126th Street Unit A, Hawthorne, CA 90250,
Phone: (310) 484-2322 Fax: (310) 484-0152
PCS EGT-2000 8-CH EGT Module to AEM CD Dash
Supported Devices
PCS EGT-2000 8CH EGT
CAN Bus Wiring
AEM CD has 2 separate CAN ports. For 3rd party devices, AEM recommends you use AEM CAN Bus 2, whose
connections are contained in a 2 pin Deutsch DTM connector. On older harnesses it may be in an unterminated,
twisted/shielded flying lead in the dash harness.
EGT-2000 Pinout & Wire Color
Pin
Function
Wire Color
1
Sw Power
Red
2
Ground
Black
3
CAN High
White w/red stripe
4
CAN Low
White w/black stripe
5-8
Not Used
EGT-2000 CAN High (Pin 3) AEM CD Dash "CAN 2" 2 Pin DTM Pin 1 (Gray wire in twisted/shielded pair)
EGT-2000 CAN Low (Pin 4) AEM CD Dash "CAN 2" 2 Pin DTM Pin 2 (Black wire in twisted/shielded pair)
Terminating Resistors:
The EGT-2000 does not have an internal terminating resistor. Assuming the resistor in the CD-7 is activated, one
more terminating resistor must be present. If an ECU is connected, it may have one internally (AEM ECU's do), if
no then one must be added to the network.
SETUP GUIDE
This product is legal in California for racing vehicles only and should never be used on public
highways. AEM Performance Electronics, 2205 W. 126th Street Unit A, Hawthorne, CA 90250,
Phone: (310) 484-2322 Fax: (310) 484-0152
Supported Channels
The CD Dash supports the following 20 data channels transmitted by the EGT-2000:
CH
Channel Name
CH
Channel Name
CH
Channel Name
1
EGT1
8
EGT8
15
EGTAverage3Config
2
EGT2
9
EGTAverage1
16
EGTAverage4Config
3
EGT3
10
EGTAverage2
17
EGTFaultCodes
4
EGT4
11
EGTAverage3
18
EGTVersionHardware
5
EGT5
12
EGTAverage4
19
EGTVersionMajor
6
EGT6
13
EGTAverage1Config
20
EGTVersionMinor
7
EGT7
14
EGTAverage2Config
CAN Setup
You can either start with a new dash layout by selecting “File” then “New” in DashDesign or you can select from a
pre-designed layout that has screens already designed and inserted but has the CAN inputs left blank. These are
chosen by selecting “File” then “Open” and selecting one of the setups titled xzyblank.aemcd7 with the xyz
representing a description of the layouts contained in the file.
To import the CAN setup you select SETUP then DISPLAY from the main DashDisplay menu. Once the dialog
box opens you select the “CAN Receive” tab.
SETUP GUIDE
This product is legal in California for racing vehicles only and should never be used on public
highways. AEM Performance Electronics, 2205 W. 126th Street Unit A, Hawthorne, CA 90250,
Phone: (310) 484-2322 Fax: (310) 484-0152
Change the settings to the following:
Show: “Port 2”
Baudrate: 500 kbit/s
Termination Resistor: “ON”
Address Mask: “OFF”
M800 Support: “OFF”
Then click on “Import CAN” on the lower left and select the can setup file. The new items will appear in the Outputs
tab. They can now be viewed on the display or logged. You can rename, filter, or manipulate any of these channels
to make them more useful.
  • Page 1 1
  • Page 2 2
  • Page 3 3

AEM All CD-5 and CD-7 Dashes Operating instructions

AEM
Brand
AEM
Model
All CD-5 and CD-7 Dashes
Type
Operating instructions

AEM All CD-5 and CD-7 Dashes are powerful and versatile digital dashboards that provide drivers with a wealth of information and control over their vehicles. With a large, high-resolution display, these dashes can display a variety of data, including speed, RPM, fuel level, and coolant temperature. They also feature a number of customizable features, such as the ability to change the display layout, set warnings and alarms, and log data. Whether you're a professional racer or a weekend enthusiast, AEM All CD-5 and CD-7 Dashes can help you get the most out of your vehicle.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents