Lynx LServe / LPZA / L30AG / L30 User manual

Category
Barbecues & grills
Type
User manual
Installing the Service and Prep Top, Asado, 30” Grill, Sonoma Smoker, or Napoli Pizza Oven on
an LMKC54
LSERVE, LPZA, L30AG, LSMK and L30(PS)R
The following instructions are provided to help you install the Service and Prep Top, Asado, 30” Grill, Sonoma Smoker
or Napoli Pizza Oven on the LMKC54.
IMPORTANT: Be sure the LMKC54’s casters are locked to avoid movement when installing the prep top.
Warning: the LPZA is approximately 254lbs., the L30AG is approximately 208lbs., the LSMK is approximately 135 lbs.,
and the L30PSR is approximately 241 lbs. you will require assistance to lift and install any of these items onto the cart.
Tools required: Rags, newspaper (to place any items on), Philips head screwdriver, and gloves.
LServe
LPZA
L30AG
L30PSR
LSMK
1
Remove the four screws on the back panel. Slide out drawer or remove completely to begin installaon.
Align countertop at an angle, and install as shown
with the front engaged rst.
Hook the le tab inside the front frame.
LServe
Lay the countertop at and apply
pressure to seat the countertop.
Re-aach
the rear panel with the
previously removed screws.
2
Remove the four screws on the back panel. Slide out drawer or remove completely to begin installaon.
LPZA
Place the pizza oven inside the cart frame.
Re-aach the rear panel with the previously removed screws,
and slide the cart ulity drawer back into posion of the roller
bearings. Reinstall the cooking deck.
Remove the cooking deck by sliding it forward and
carefully liing the deck out of the oven.
Remove all of the rubber feet o the base
(only two shown in illustraon).
3
Remove the four screws on the back panel. Slide out drawer and remove completely to begin installaon.
L30AG
Place the Asado Grill inside the cart frame.
Re-aach the rear panel with the previously removed screws.
Carefully li the Asado Grill and posion it
above the cart.
4
Remove the four screws on the back panel. Slide out drawer or remove completely to begin installaon.
L30PSR
Place the grill inside the cart frame.
Re-aach the rear panel with the previously removed screws.
Carefully li the 30” Grill and posion it above the
cart.
Once the grill has been placed inside the cart. You will want to remove
the following screws and replace them with the supplied screws.
5
Remove the four screws on the back panel. Slide out drawer or remove completely to begin installaon.
LSMK
Place the smoker inside the cart frame.
Carefully li the Sonoma Smoker and posion it
above the cart.
Once the grill has been placed inside the cart. You will want to remove
the following screws and replace them with the supplied screws.
Re-aach the rear panel with the previously removed screws.
6
7
PN 36897 6/2020
 
 
 


8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Lynx LServe / LPZA / L30AG / L30 User manual

Category
Barbecues & grills
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI