Insignia NS-AF7GLS User guide

Category
Screen protectors
Type
User guide
PACKAGE CONTENTS
• Screen protector
• Dry cloth
• Wet cloth
• Hinge stickers (2)
FEATURES
Impact resistant glass
Crystal clear screen without bubbles
Simple installation with hinge stickers
ATTACHING YOUR SCREEN PROTECTOR
1 Align the screen protector with your device's
screen. Make sure the tab is facing down.
2 Secure the screen protector at the top with
the two hinge stickers.
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
Glass Screen
Protector
• Polishing cloth
• Dust removal adhesive
Quick Setup Guide
Screen protector
Tab
Hinge stickers
NS-iP18105GLS_NS-iP18129GLS_NS-GNSSP2_-C_21-0235_QSG_V4_EN_Final.ai 1 2/8/2021 9:22:03 AM
3 Lift up your screen protector and clean your
device screen with the wet cloth then with
the dry cloth (both included). Use the dust
removal adhesive (included) to clean any
remaining debris. Do not use any solvents.
4 Slowly pull back the tab to remove the
adhesive backing. The screen protector
adheres to your device's screen.
5 Remove the hinge stickers.
6 Push out any bubbles with your nger or the
polishing cloth (included). Start from the
center of the protector and work your way
to the edges.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2021 Best Buy. All rights reserved.
V4 ENGLISH 21-0235
Tab
Device screen
Wet cloth,
dry cloth, then
removal adhesive
NS-iP18105GLS_NS-iP18129GLS_NS-GNSSP2_-C_21-0235_QSG_V4_EN_Final.ai 2 2/8/2021 9:22:03 AM
  • Page 1 1
  • Page 2 2

Insignia NS-AF7GLS User guide

Category
Screen protectors
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI