HKS 71002-AZ001 Installation guide

Hello! I've reviewed the user manual for the HKS Return Set 71002-AZ001. This manual provides a step-by-step guide for installing the Super SQV Return Set on Mazdaspeed 3 models. It includes instructions on removing existing parts, installing the recirculation fitting, and adjusting the SSQV angle. I'm ready to answer any questions you may have about the installation or the included parts.
What vehicles is this Return Set compatible with?

What is included in the kit?

What should I do before rotating the SSQV?

Super SQV Return Set

Part Number: 71002-AZ001

This item is exclusively for P/N 71004-AZ008, 71007-AZ008, 71008-AZ008 (SSQV for Mazdaspeed 3).

Parts List

Return Hose

・・・・・・・・・・・・・・・・・・

1

Hose Clamp (#16)

・･･・・・・・・・・

2

Installation Manual (Japanese)

・・

1

Installation Manual (English)

・・

1

※ Manual Number: E04533-Z67020-00

Published in November 20 2020 by HKS Co., Ltd. (Unauthorized reproduction is strictly prohibited.)

Installation of SSQV Return Kit

1. Remove the factory intercooler cover and the

factory suction hose referring to the SSQV

installation manual.

2. Install the Recirculation Fitting to the SSQV

assembly referring to the SSQV installation

manual.

3. Release the C-clip of the SSQV assembly. Rotate

and adjust the angle of the SSQV on the SSQV

adapter. (Dia.1)

The C-clip must be loosened before rotating the

valve. Failure to do so may damage the valve.

4. Install the SSQV assembly referring to the SSQV

installation manual. (Dia.2 ,Dia.3)

5. Re-install the factory intercooler cover and the

factory suction hose.

/

Other documents