soundskins sedan Operating instructions

Brand: soundskins

Model: sedan

Type: Operating instructions

SoundSkins Sedan: Transform your car into a tranquil oasis with our custom-cut soundproofing kit. Experience a serene and comfortable ride, free from road noise and distractions. Our kit includes everything you need for a hassle-free installation, ensuring a quieter and more enjoyable driving experience.

Sedan Door Kit Instructions

1. Start by locating the fastening hardware on the door

panel. Take the appropriate screw driver and remove.

Once all the screws are removed you can take off the

door panel gently using a panel tool, watching that you

don’t break any of the clips or mounting hardware.

2. Pull the panel away slowly and unplug any electrical

connections.

3. Now you are ready to prep the metal surface using a

microfiber cloth and Acetone (or other cleaning solution).

Wipe away any moisture, oil, debris, etc. Then, let it air

dry for an appropriate time. The point is to get the

surface clean to ensure material glue contact.

• Panel/trim tool

• Roller

• Screw driver

• Microber cloth

• Acetone or cleaning solution

• Razor blade

Tools needed for installation:

SoundSkins USA

13452 Alondra Blvd, Cerritos, Ca 90703

Phone: 877.211.5597

Email: team@soundskinsglobal.com

www.SoundSkinsGlobal.com

5. Locate the piece of the kit with the label on the back

that coincides with the door you’re working on. Make

sure it lines up and is correct before you pull the white

cover paper off. After you confirm the right piece, pull off

the white paper and use a roller to apply the material at

the top and work your way down. Use a razor blade or

household needle to release air. Repeat for all door

panels.

6. Now you are ready to place the door panel back on

your door. All necessary openings will be available after

you have applied the SoundSkins material. Secure your

door panels with all screws and enjoy your quiet new

ride!

YOU’RE NOW READY TO HIT THE ROAD!

Recommended Installation Instructions

A. Prepping the Surface

After removing interior door panels you are ready to clean the metal areas that will be insulated. If the metal

has “new” look without imperfections then take a microfiber cloth and wipe away any dust and debris. If the metal

is showing signs of age like rust then we recommend using Acetone with a breathing mask to wipe off debris and

loose particles. A shop vacuum might be needed to remove loose debris on the floorboard.

B. Installing Panels

Now that you have a clean surface you are ready to start applying the sheets. We recommend a roller to release

air pockets that might be lingering from trapped air. You want to make sure that you have rolled those out to the

edge and all the material has a good seal to the metal surface. Make sure all pieces are installed and inspected

before reinstalling the interior.

1) Driver Front Door Panel 3) Passenger Front Door Panel

2) Driver Rear Door Panel 4) Passenger Rear Door Panel

4 Piece Custom Cut PRO KIT

2018+

soundskins sedan Operating instructions

soundskins sedan Operating instructions

soundskins sedan Operating instructions

Related papers

Other documents