Yale Q50299 is a versatile window actuator designed to automate and enhance your window operation. With its powerful motor and adjustable opening length, it seamlessly integrates with both Conel and Aeron systems, providing a range of smart features to simplify your life.
Yale Q50299 is a versatile window actuator designed to automate and enhance your window operation. With its powerful motor and adjustable opening length, it seamlessly integrates with both Conel and Aeron systems, providing a range of smart features to simplify your life.
Power Supply
24V DC 1A
White +
Black -
Aeron
Window
Actuator
BROWN
BLUE
BROWN
BLUE
Retrofit Conel with Aeron Actuator - Instructions
Q50299_0623
Standalone - Wiring instructionStandalone - System
Standalone - Wiring instructionStandalone - System
Wiring circuit guide:
1. Determine if AC or DC transformer is being used for Conel
2. 24V DC transformer must be used to power Aeron actuator
3. Existing Standalone Conel 24VDC transformer can be retained
4. Existing wiring can be reused for the Aeron power supply
5. Determine Conel chain opening length (150mm or 250mm)
6. Turn off system power
7. Disconnect power supply cables from Conel
8. Remove Wall switch cover. Disconnect/bypass power cables from switches connecting
directly to the actuators. Connect power cable to Aeron window operator. Extend power
cables if required
Mechanical Installation:
1. Unscrew/remove Conel sash bracket from the window
2. Remove pivot brackets or fixing screws and remove Conel from the window sill
3. Follow Aeron window actuator installation instruction on how to install Aeron Actuator
4. Once Aeron Actuator is installed, restrict its opening length to match Conel as closely as
possible. (150mm Conel = 100mm Aeron, 250mm Conel = 200mm Aeron window opening)
5. Connect wireless hub with Aeron actuators using Remote or Yale Home app.
Refer quick start guide
Notes:
1. Existing screw holes may need to be filled and new holes needs to be drilled
2. While drilling new holes take extreme care to avoid drilling into the glazing/glass
3. Aeron Actuator cannot use Conel wall switch setup
4. Aeron system must be connected with the hub to use wireless Remote
5. Conel rain sensor will not work with Aeron. New rain sensor and rain sensor adaptor
will be required
Wiring circuit guide:
1. Determine if AC or DC transformer is being used for Conel
2. DC transformer must be used to power Aeron actuator
3. Existing Keypad Conel 24VAC transformer cannot be used
4. New 24VDC transformer must be connected to run Aeron Actuator
5. Conel keypad cannot be used with Aeron Actuator so keypad must be disconnected
6. Existing wiring can be reused for the Aeron power supply
7. Determine Conel chain opening length (150mm or 250mm)
8. Turn off keypad power
9. Disconnect power supply cables from Conel system
10.Remove Keypad cover. Disconnect power cables from keypad. Reconnect power cables
using 24VDC transformer to Aeron actuators. Extend power cables if required
Mechanical Installation:
1. Unscrew/remove Conel sash bracket from the window
2. Remove pivot bracket and take out Conel from the window sill
3. Follow Aeron window actuator installation instruction on how to install Aeron Actuator
4. Once Aeron Actuator is installed, restrict it's opening length to match Conel as closely as
possible (150mm Conel = 100mm Aeron, 250mm Conel = 200mm Aeron window opening)
5. Connect wireless hub with Aeron actuators using Remote or Yale Home app.
Refer quick start guide.
Notes:
1. Existing screw holes may need to be filled and new holes needs to be drilled
2. While drilling new holes take extreme care to avoid drilling into the glazing
3. Aeron Actuator cannot use Conel keypad
4. Aeron system must be connected with the hub to use wireless remote or Yale Home App
5. Conel rain sensor will not work with Aeron. New rain sensor and rain sensor adaptor
will be required
Existing System- Conel
Standalone option
New System- Aeron Actuator
Standalone option
Standalone system Retrofit
Keypad system Retrofit
Keypad - Wiring instruction
BACK OF THE KEYPAD
Keypad - System
Keypad- Wiring instructionKeypad - System
Existing System- Conel
Keypad option
New System- Aeron Actuator
Keypad option
Aeron 3
Aeron 4
Aeron 1
Aeron 2
-
1
Yale Q50299 is a versatile window actuator designed to automate and enhance your window operation. With its powerful motor and adjustable opening length, it seamlessly integrates with both Conel and Aeron systems, providing a range of smart features to simplify your life.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Herman Miller Ambi Chairs Product Instructions
-
-
HQ Power VDP575MHS20FL User manual
-
HQ Power VDP575MHW16FL User manual
-
HQ Power VDP250MHS18FL2 User manual
-
HQ Power AERON 575S moving head User manual
-
INT-BIO AeroNox 2.0 User manual
-
HQ Power AERON 575 I User manual
-
Engineered Now HR-04 User manual
-
Fisher & Paykel BI601QASE2 User manual
