2. Optical
  3. AA17089
AA17089

Optical AA17089 User manual

  • Hello! I've reviewed the operation manual for the AA17089 Fiber optic terminal box and understand the step-by-step process for its installation. This includes instructions for cable stripping, fiber splicing, pigtail connections, and proper box closure. I can answer questions you have about these procedures and help you understand how to properly install the terminal box.
  • What is the minimum length to strip the cable?
    What should I do after splicing the cable with pigtails?
    When should I close the box?
Operation manual
Model: AA17089
Step 1.
Open the Fiber optic terminal box. Check and prepare
installation tools and accessories. To establish easy and safe
installation put the box where it will be installed and measure
the required length of the cable. Prepare the safe installation
of the box.
Step 2.
Strip the cable the required length, minimum 1 meter or
more, to establish easy and safe installation with enough
buffer size. Fix the cable strength member (4) on the column
(3), use cable gland (1) and stabilize with cable fixing part (2)
inside the box.
Step 3.
Coil the cable inside the bottom box and enter the stripped
cable into the splicing tray (1). Splice the stripped cable with
the pigtails (2). Put on the fiber protect sleeves, then in the
splice tray (3).
Step 4.
Pass the spliced pigtails to the upper side of the tray and
connect them with the adapters. Coil the remaining cable in
the puffers.
Step 5.
Connect the pigtails with drop cable connector after finishing
the basic light test or the measuring of all fibers.
Step 6.
Close the box after finishing all cable connections and then
put it on the designated place.
3
1
2
4
3
1
2
www.optical.hu
/