
TW S E A
User Quick
R P H O N E
Light
Touch Button
HOW TO POWER ON AND PAIR THE EARPHONES
Guide
Light
Transmission distance: 10M
Earphone battery: 40mAh
Charge box capacity: 400mAh
Work time: 3-4hour
Charging time: 1-2hour
Charging case voltage: 5V
1. Charge with the charging dock, The white light flashing.
2. The earp h o ne is ch arging an d p o w ers o ff, The red lig ht.
CHARGING STATE
1. When the earphones are removed from the charging case,
they will automatically turn on and pair to each other automatically.
2. Bluetooth pairing name: k023
3. When using the earphones later, it will automatically
connect to the phone.
4. Earphones will automatically turn off if there is not connected to
phone after 5 minutes.
PRODUCT PARAMETERS
Power on
HOW TO USE (TOUCH BUTTON)
Power off
Long press the touch 2s
Long press the touch 3s
Play/Pause One click
Long press the touch 1s
SIRI
Answer the call One click
Refuse the incoming call Long press the touch 1s
Hang up the call
One clickCancel the dial
Power on
Power off
Long press the touch 2s
Long press the touch 3s
Play/Pause One click
Touch Button(Right Earphone)
Touch Button(Left Earphone)
Volume -
Previous song Double clicks
Three clicks
One click
Answer the call One click
Refuse the incoming call Long press the touch 1s
One clickCancel the dial
Volume +
Next song
Hang up the call Double click
Three clicks
Double clicks
W