Yale SYGAW2DP is a window restrictor designed to enhance safety and security in your home. Here are some key features and use cases:
-
Child Safety: Provides a simple yet effective way to prevent children from opening windows beyond a safe limit, reducing the risk of falls and accidents.
-
Anti-Intrusion Protection: Acts as a deterrent against unauthorized entry by restricting window openings, making it harder for intruders to gain access to your property.
-
Ventilation Control: Allows for controlled ventilation while maintaining security. You can keep your windows partially open for fresh air circulation while ensuring they remain secure.
Yale SYGAW2DP is a window restrictor designed to enhance safety and security in your home. Here are some key features and use cases:
-
Child Safety: Provides a simple yet effective way to prevent children from opening windows beyond a safe limit, reducing the risk of falls and accidents.
-
Anti-Intrusion Protection: Acts as a deterrent against unauthorized entry by restricting window openings, making it harder for intruders to gain access to your property.
-
Ventilation Control: Allows for controlled ventilation while maintaining security. You can keep your windows partially open for fresh air circulation while ensuring they remain secure.
SYGAW2DP(White)
SYGAB2DP (Black)
SYGAS2DP (Silver)
Features
• Fully releasable and self re-engaging
• Does not protrude into blinds or curtains
• Safer window control in windy conditions
Tools required
• Drill
• 3.2mm drill bit
• Phillips screwdriver
• Tape measure
SYGA
Q25048_1122
ASSA ABLOY New Zealand
6 Armstrong Road, Albany,
Auckland 0632, New Zealand
Quality, ISO 9001
Environmental, ISO 14001
For customer feedback:
nzsales@assaabloy.com
yalehome.com/nz
Suitable for awning
Easy install
Provides child safety
Deters unlawful entry
Instructions included
• 2 x Guardian Securistay
• 1 x Release tool
• 1 x Marking template
• 2 x Screw pack
• 4 x Packers and adaptors
• Marker pen
• Centre punch
• Safety goggles
PROVIDES
CHILD SAFETY
SUITABLE
FOR AWNING
DETERS
UNLAWFUL ENTRY
Guardian
Securistay
Safer window ventilation
Suitable for aluminium
LIP AT
FRONT
4mm to
hole centre
25mm
hole pitch
Guardian Securistay
For Safer Window Ventilation
Application: Allows safer ventilation when house is occupied.
Operation: Restricts window opening. Arm can be disengaged
(only when window is closed) to allow wider window opening.
When installed correctly, arm re-engages automatically when
window is closed.
Determine window offset.
(Distance between frame and sash)
Refer to packer and screw selection
chart overleaf to determine a
flush fix, standard or side fix
installation.
Select appropriate screws
and packers.
Base
Assembly
Marking
Template
Cover
Assembly
Side
Cover
Hook Screw
Pack
Release
Tool
Packers &
Adaptors
Arm
GLASS
SASH
FRAME
SASH
FRAME
GLASS
OFFSET
GLASS
SASH
FRAME
FRAME
GLASS
OFFSET
SASH
NB: Care should be taken when drilling
holes to avoid making contact with glass
Determine Guardian install height.
Measure window height and find
appropriate install height using chart
below. Mark height on window.
For side fix applications only
Attach side fix adapter to sash.
• Align the top edge of the
adaptor with the install
height on the window
• Mark and centre punch holes
Hole pitch 25mm, 4mm
centres from front sash edge
• Drill 2 x 3.2mm holes
Drilling Guardian hole positions.
• Align top of template
with install height mark
• Mark and centre punch
holes in frame and sash
(or side fix adaptor in side
fix applications)
• Drill 2 x 3.2mm frame
holes
• Drill 2 x 3.2mm sash holes
2
3
4
Window Height Install Height
<600mm 200mm
600mm - 800mm 300mm
>800mm 400mm
FRAME
SASH
INSTALL
HEIGHT
WINDOW HEIGHT
Standard
Application
Side Fix
Application
INSTALL HEIGHT
• Attach adaptor using
2 x 21mm screws.
INSTALL HEIGHT
Template can be used for
both left and right sides of windows.
Left hand installation shown for all steps
INSTALL
HEIGHT
Use hook packers behind template
to straighten if necessary
5
6
7
8
Attach base to frame.
• See packer and screw selection chart
• Hang arm over hook as shown
• Attach base to frame using
appropriate screws
Clip cover on to base.
• Cycle the window open and shut
to check operation
• Open the window to maximum
restricted position
• Line up the cover and base as shown
and clip on the cover assembly.
Push cover firmly to clip in place.
In situations where the back of the
restrictor is visible, press the side cover
on to the cover assembly.
Attach hook to sash.
• See packer and screw
selection chart
• Attach hook to sash
using appropriate
screws and packers
Standard
Application
Side Fix
Application
This way up
The optimum window off-set for Guardian Securistay is 6mm.
Use the enclosed packers to achieve the optimum 6mm window off-set.
Window off-set Packer/s Base Fixing Screw Hook Fixing Screw
Flush
fix
Flush
(no off-set, refer
to instructions
online*)
Base packer 6mm Q60342 24mm base screw 9mm hook screw
Standard
Application
5mm to 7mm No packers required 18mm base screw 9mm hook screw
8mm to 10mm Hook packers 1mm and
2mm stackable Q60341
18mm base screw 9mm hook screw
Side fix
Application
Side fix (off-set of
15mm or more)
Hook side fix packer
Q60345 (Hook packers
1mm and 2mm stackable
Q60341 can also be used
with the side fix packer to
pack out hook)
18mm base screw 21mm side fix screw (side
fixing packer to window
sash). 12mm hook screw
(fixing hook to packer)
18
24
9
21
12
Draw13
P O Box 100-407, NSMC
Auckland 0745, New Zealand
THIS DRAWING AND ITS CONTENTS IS THE PROPERTY OF
ASSA ABLOY NEW ZEALAND LTD. REPRODUCTION OF ANY
PART OF THE DRAWING IN ANY FORM WHATSOEVER WITHOUT
THE PRIOR WRITTEN PERMISSION OF ASSA ABLOY
NEW ZEALAND LTD IS STRICTLY FORBIDDEN.
COPYRIGHT ASSA ABLOY NEW ZEALAND LTD 2012
Leader DateProjectVersion
A3
Scale:
Drawing No: Version:
Treatment/
Finish:
DO NOT SCALE
5:1
All Dims in mm - AS1100
Sheet:
1 of 1
Draw4
Printed on 24/02/2012
Material:
Checked By:
THIRD ANGLE
PROJECTION
Title:
NOTE: Printed dwg to be destroyed after use. Electronic version remains the master.
Drawn By:
Release Appr:
Date:
Date:
Date:
/2012
/2012
Tool No:
Asset No:
Unspecied
Tolerances ±0.5±0.3± 0.2± 0.1± 0.1
>120~400>30~120>6~30>3~6
0.5 ~ 3
Tolerance (mm)
Linear (mm)
Angular Tol.
(deg) ± 0.5Ā
Project:
Calc. Weight:
g
NOTES:
TOOL TO BE SUPPLIED WITH ALL ELECTRODES
1.
DIMENSIONS AND TOLERANCES AS PER SA2059 FOR
2.
DIECAST TOOLS AND SA3300 FOR PLASTIC TOOLS.
18
24
9
21
12
Draw13
P O Box 100-407, NSMC
Auckland 0745, New Zealand
THIS DRAWING AND ITS CONTENTS IS THE PROPERTY OF
ASSA ABLOY NEW ZEALAND LTD. REPRODUCTION OF ANY
PART OF THE DRAWING IN ANY FORM WHATSOEVER WITHOUT
THE PRIOR WRITTEN PERMISSION OF ASSA ABLOY
NEW ZEALAND LTD IS STRICTLY FORBIDDEN.
COPYRIGHT ASSA ABLOY NEW ZEALAND LTD 2012
Leader DateProjectVersion
A3
Scale:
Drawing No: Version:
Treatment/
Finish:
DO NOT SCALE
5:1
All Dims in mm - AS1100
Sheet:
1 of 1
Draw4
Printed on 24/02/2012
Material:
Checked By:
THIRD ANGLE
PROJECTION
Title:
NOTE: Printed dwg to be destroyed after use. Electronic version remains the master.
Drawn By:
Release Appr:
Date:
Date:
Date:
/2012
/2012
Tool No:
Asset No:
Unspecied
Tolerances ±0.5±0.3± 0.2± 0.1± 0.1
>120~400>30~120>6~30>3~6
0.5 ~ 3
Tolerance (mm)
Linear (mm)
Angular Tol.
(deg) ± 0.5Ā
Project:
Calc. Weight:
g
NOTES:
TOOL TO BE SUPPLIED WITH ALL ELECTRODES
1.
DIMENSIONS AND TOLERANCES AS PER SA2059 FOR
2.
DIECAST TOOLS AND SA3300 FOR PLASTIC TOOLS.
18
24
9
21
12
Draw13
P O Box 100-407, NSMC
Auckland 0745, New Zealand
THIS DRAWING AND ITS CONTENTS IS THE PROPERTY OF
ASSA ABLOY NEW ZEALAND LTD. REPRODUCTION OF ANY
PART OF THE DRAWING IN ANY FORM WHATSOEVER WITHOUT
THE PRIOR WRITTEN PERMISSION OF ASSA ABLOY
NEW ZEALAND LTD IS STRICTLY FORBIDDEN.
COPYRIGHT ASSA ABLOY NEW ZEALAND LTD 2012
Leader DateProjectVersion
A3
Scale:
Drawing No: Version:
Treatment/
Finish:
DO NOT SCALE
5:1
All Dims in mm - AS1100
Sheet:
1 of 1
Draw4
Printed on 24/02/2012
Material:
Checked By:
THIRD ANGLE
PROJECTION
Title:
NOTE: Printed dwg to be destroyed after use. Electronic version remains the master.
Drawn By:
Release Appr:
Date:
Date:
Date:
/2012
/2012
Tool No:
Asset No:
Unspecied
Tolerances ±0.5±0.3± 0.2± 0.1± 0.1
>120~400>30~120>6~30>3~6
0.5 ~ 3
Tolerance (mm)
Linear (mm)
Angular Tol.
(deg) ± 0.5Ā
Project:
Calc. Weight:
g
NOTES:
TOOL TO BE SUPPLIED WITH ALL ELECTRODES
1.
DIMENSIONS AND TOLERANCES AS PER SA2059 FOR
2.
DIECAST TOOLS AND SA3300 FOR PLASTIC TOOLS.
18
24
9
21
12
Draw13
P O Box 100-407, NSMC
Auckland 0745, New Zealand
THIS DRAWING AND ITS CONTENTS IS THE PROPERTY OF
ASSA ABLOY NEW ZEALAND LTD. REPRODUCTION OF ANY
PART OF THE DRAWING IN ANY FORM WHATSOEVER WITHOUT
THE PRIOR WRITTEN PERMISSION OF ASSA ABLOY
NEW ZEALAND LTD IS STRICTLY FORBIDDEN.
COPYRIGHT ASSA ABLOY NEW ZEALAND LTD 2012
Leader DateProjectVersion
A3
Scale:
Drawing No: Version:
Treatment/
Finish:
DO NOT SCALE
5:1
All Dims in mm - AS1100
Sheet:
1 of 1
Draw4
Printed on 24/02/2012
Material:
Checked By:
THIRD ANGLE
PROJECTION
Title:
NOTE: Printed dwg to be destroyed after use. Electronic version remains the master.
Drawn By:
Release Appr:
Date:
Date:
Date:
/2012
/2012
Tool No:
Asset No:
Unspecied
Tolerances ±0.5±0.3± 0.2± 0.1± 0.1
>120~400>30~120>6~30>3~6
0.5 ~ 3
Tolerance (mm)
Linear (mm)
Angular Tol.
(deg) ± 0.5Ā
Project:
Calc. Weight:
g
NOTES:
TOOL TO BE SUPPLIED WITH ALL ELECTRODES
1.
DIMENSIONS AND TOLERANCES AS PER SA2059 FOR
2.
DIECAST TOOLS AND SA3300 FOR PLASTIC TOOLS.
18
24
9
21
12
Draw13
P O Box 100-407, NSMC
Auckland 0745, New Zealand
THIS DRAWING AND ITS CONTENTS IS THE PROPERTY OF
ASSA ABLOY NEW ZEALAND LTD. REPRODUCTION OF ANY
PART OF THE DRAWING IN ANY FORM WHATSOEVER WITHOUT
THE PRIOR WRITTEN PERMISSION OF ASSA ABLOY
NEW ZEALAND LTD IS STRICTLY FORBIDDEN.
COPYRIGHT ASSA ABLOY NEW ZEALAND LTD 2012
Leader DateProjectVersion
A3
Scale:
Drawing No: Version:
Treatment/
Finish:
DO NOT SCALE
5:1
All Dims in mm - AS1100
Sheet:
1 of 1
Draw4
Printed on 24/02/2012
Material:
Checked By:
THIRD ANGLE
PROJECTION
Title:
NOTE: Printed dwg to be destroyed after use. Electronic version remains the master.
Drawn By:
Release Appr:
Date:
Date:
Date:
/2012
/2012
Tool No:
Asset No:
Unspecied
Tolerances ±0.5±0.3± 0.2± 0.1± 0.1
>120~400>30~120>6~30>3~6
0.5 ~ 3
Tolerance (mm)
Linear (mm)
Angular Tol.
(deg) ± 0.5Ā
Project:
Calc. Weight:
g
NOTES:
TOOL TO BE SUPPLIED WITH ALL ELECTRODES
1.
DIMENSIONS AND TOLERANCES AS PER SA2059 FOR
2.
DIECAST TOOLS AND SA3300 FOR PLASTIC TOOLS.
18
24
9
21
12
Draw13
P O Box 100-407, NSMC
Auckland 0745, New Zealand
THIS DRAWING AND ITS CONTENTS IS THE PROPERTY OF
ASSA ABLOY NEW ZEALAND LTD. REPRODUCTION OF ANY
PART OF THE DRAWING IN ANY FORM WHATSOEVER WITHOUT
THE PRIOR WRITTEN PERMISSION OF ASSA ABLOY
NEW ZEALAND LTD IS STRICTLY FORBIDDEN.
COPYRIGHT ASSA ABLOY NEW ZEALAND LTD 2012
Leader DateProjectVersion
A3
Scale:
Drawing No: Version:
Treatment/
Finish:
DO NOT SCALE
5:1
All Dims in mm - AS1100
Sheet:
1 of 1
Draw4
Printed on 24/02/2012
Material:
Checked By:
THIRD ANGLE
PROJECTION
Title:
NOTE: Printed dwg to be destroyed after use. Electronic version remains the master.
Drawn By:
Release Appr:
Date:
Date:
Date:
/2012
/2012
Tool No:
Asset No:
Unspecied
Tolerances ±0.5±0.3± 0.2± 0.1± 0.1
>120~400>30~120>6~30>3~6
0.5 ~ 3
Tolerance (mm)
Linear (mm)
Angular Tol.
(deg) ± 0.5Ā
Project:
Calc. Weight:
g
NOTES:
TOOL TO BE SUPPLIED WITH ALL ELECTRODES
1.
DIMENSIONS AND TOLERANCES AS PER SA2059 FOR
2.
DIECAST TOOLS AND SA3300 FOR PLASTIC TOOLS.
18
24
9
21
12
Draw13
P O Box 100-407, NSMC
Auckland 0745, New Zealand
THIS DRAWING AND ITS CONTENTS IS THE PROPERTY OF
ASSA ABLOY NEW ZEALAND LTD. REPRODUCTION OF ANY
PART OF THE DRAWING IN ANY FORM WHATSOEVER WITHOUT
THE PRIOR WRITTEN PERMISSION OF ASSA ABLOY
NEW ZEALAND LTD IS STRICTLY FORBIDDEN.
COPYRIGHT ASSA ABLOY NEW ZEALAND LTD 2012
Leader DateProjectVersion
A3
Scale:
Drawing No: Version:
Treatment/
Finish:
DO NOT SCALE
5:1
All Dims in mm - AS1100
Sheet:
1 of 1
Draw4
Printed on 24/02/2012
Material:
Checked By:
THIRD ANGLE
PROJECTION
Title:
NOTE: Printed dwg to be destroyed after use. Electronic version remains the master.
Drawn By:
Release Appr:
Date:
Date:
Date:
/2012
/2012
Tool No:
Asset No:
Unspecied
Tolerances ±0.5±0.3± 0.2± 0.1± 0.1
>120~400>30~120>6~30>3~6
0.5 ~ 3
Tolerance (mm)
Linear (mm)
Angular Tol.
(deg) ± 0.5Ā
Project:
Calc. Weight:
g
NOTES:
TOOL TO BE SUPPLIED WITH ALL ELECTRODES
1.
DIMENSIONS AND TOLERANCES AS PER SA2059 FOR
2.
DIECAST TOOLS AND SA3300 FOR PLASTIC TOOLS.
18
24
9
21
12
Draw13
P O Box 100-407, NSMC
Auckland 0745, New Zealand
THIS DRAWING AND ITS CONTENTS IS THE PROPERTY OF
ASSA ABLOY NEW ZEALAND LTD. REPRODUCTION OF ANY
PART OF THE DRAWING IN ANY FORM WHATSOEVER WITHOUT
THE PRIOR WRITTEN PERMISSION OF ASSA ABLOY
NEW ZEALAND LTD IS STRICTLY FORBIDDEN.
COPYRIGHT ASSA ABLOY NEW ZEALAND LTD 2012
Leader DateProjectVersion A3
Scale:
Drawing No: Version:
Treatment/
Finish:
DO NOT SCALE
5:1
All Dims in mm - AS1100
Sheet:
1 of 1
Draw4
Printed on 24/02/2012
Material:
Checked By:
THIRD ANGLE
PROJECTION
Title:
NOTE: Printed dwg to be destroyed after use. Electronic version remains the master.
Drawn By:
Release Appr:
Date:
Date:
Date:
/2012
/2012
Tool No:
Asset No:
Unspecied
Tolerances ±0.5± 0.3±0.2± 0.1±0.1
>120~400>30~120>6~30>3~6
0.5 ~ 3
Tolerance (mm)
Linear (mm)
Angular Tol.
(deg) ±0.5Ā
Project:
Calc. Weight:
g
NOTES:
TOOL TO BE SUPPLIED WITH ALL ELECTRODES
1.
DIMENSIONS AND TOLERANCES AS PER SA2059 FOR
2.
DIECAST TOOLS AND SA3300 FOR PLASTIC TOOLS.
18
24
9
21
12
Draw13
P O Box 100-407, NSMC
Auckland 0745, New Zealand
THIS DRAWING AND ITS CONTENTS IS THE PROPERTY OF
ASSA ABLOY NEW ZEALAND LTD. REPRODUCTION OF ANY
PART OF THE DRAWING IN ANY FORM WHATSOEVER WITHOUT
THE PRIOR WRITTEN PERMISSION OF ASSA ABLOY
NEW ZEALAND LTD IS STRICTLY FORBIDDEN.
COPYRIGHT ASSA ABLOY NEW ZEALAND LTD 2012
Leader DateProjectVersion A3
Scale:
Drawing No: Version:
Treatment/
Finish:
DO NOT SCALE
5:1
All Dims in mm - AS1100
Sheet:
1 of 1
Draw4
Printed on 24/02/2012
Material:
Checked By:
THIRD ANGLE
PROJECTION
Title:
NOTE: Printed dwg to be destroyed after use. Electronic version remains the master.
Drawn By:
Release Appr:
Date:
Date:
Date:
/2012
/2012
Tool No:
Asset No:
Unspecied
Tolerances ±0.5± 0.3±0.2± 0.1±0.1
>120~400>30~120>6~30>3~6
0.5 ~ 3
Tolerance (mm)
Linear (mm)
Angular Tol.
(deg) ±0.5Ā
Project:
Calc. Weight:
g
NOTES:
TOOL TO BE SUPPLIED WITH ALL ELECTRODES
1.
DIMENSIONS AND TOLERANCES AS PER SA2059 FOR
2.
DIECAST TOOLS AND SA3300 FOR PLASTIC TOOLS.
Scan QR
Code to
view the
installation
video
With the window fully closed, insert the release
tool into the slot at the bottom of the Guardian
Securistay and push firmly until the arm clips up
in place.
The window can now be opened un-restricted.
Closing the window automatically
re-engages the Guardian Securistay.
* For flush fix installation instruction please visit www.yalehome.com/nz
VIEW FROM OUTSIDE
Cover Screw driver
Base
Part of ASSA ABLOY Q25048 _ 1122
Components
Fixing Instructions
1
Releasing Restriction
Removing Cover
Packer and Screw Selection Chart
Care must be taken when removing the cover
• Release the restriction as above and fully open
window to allow access to back of Guardian.
• Use a small flathead screwdriver or similar tool
to release the top plastic cover clip
(see image) Gently remove the cover.
-
1
-
2
Yale SYGAW2DP is a window restrictor designed to enhance safety and security in your home. Here are some key features and use cases:
-
Child Safety: Provides a simple yet effective way to prevent children from opening windows beyond a safe limit, reducing the risk of falls and accidents.
-
Anti-Intrusion Protection: Acts as a deterrent against unauthorized entry by restricting window openings, making it harder for intruders to gain access to your property.
-
Ventilation Control: Allows for controlled ventilation while maintaining security. You can keep your windows partially open for fresh air circulation while ensuring they remain secure.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Alfred DB2S User manual
-
Assa Abloy INTERLOCK P84167 Installation guide
-
-
-
Lockwood 107501-040 User manual
-
-
Lockwood Induro 2 Point Mortice Lock Palladium Furniture Installation guide
-
-
Fargo FARGO DTC4500e User manual
-
