LP459
Utility LED Flashlight with
Area Light
Durable aluminum construction
BROADBEAM surface LED, high efciency LED ashlight
Strong magnetic base
Ergonomic side button
O-ring sealed, IPX4
Variable brightness
LPE Optics
On/Off: Press and release button
To access the area light, pull down from the base of the
light.
Adjusting brightness in Flashlight/Area light modes:
Press and hold button down. Light emitted will in-
crease/decrease with a quick pause in the beam to
indicate highest/lowest light output.
Automatically resets to High mode when turned off.
Magnetic
Area Light
Flashlight
ANSI/PLATO FL1 STANDARD
200 lm
280 lm
LUMENSMODES
4h
2h 30m
RUN TIME
30 m
200 m
BEAM
DISTANCE
Usage and Maintenance
Operation Instructions
Product Warranty
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
USER MANUAL
Battery Replacement: In a dry environment, unscrew the
tailcap by turning counter clockwise. There will then be
an inner tailcap that is also removed by turning counter
clockwise. Remove batteries. Insert the new batteries
into the tubes according to the (+/-) symbols. Carefully
reinstall each tailcap by pressing lightly while turning
clockwise.
Care Instructions: If you know it’s going to be a while
between uses, we suggest removing batteries from your
light and storing your gear in a dry, protected place.
Limited Lifetime Warranty against manufacturer’s de-
fects. For warranty claims contact LuxPro by calling
801-553-8886 or sending an email to info@simpleprod-
ucts.com.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Armytek VIKING PRO Quick Manual
-
JetBeam PC10 User manual
-
Armytek Wizard Pro User manual
-
Armytek Optoelectronics Wizard Pro User manual
-
-
-
Armytek Optoelectronics Prime C1 Pro User manual
-
-
-
