FVCO TR0301B Installation guide

TR0301B
Brand
FVCO
Model
TR0301B
Type
Installation guide

FVCO TR0301B Transit Bed System offers a comfortable sleeping solution for your Ford Transit van. It features adjustable bed rails that can be mounted using the DIY Bed Mount Kit or directly into Adventure Wagon equipped vans. The bed panels are easily attached to the rails using provided hardware, creating a sturdy and secure sleeping platform. The system is designed to fit both high roof and mid roof vans, providing a versatile sleeping solution for your van life adventures.

FVCO TR0301B Transit Bed System offers a comfortable sleeping solution for your Ford Transit van. It features adjustable bed rails that can be mounted using the DIY Bed Mount Kit or directly into Adventure Wagon equipped vans. The bed panels are easily attached to the rails using provided hardware, creating a sturdy and secure sleeping platform. The system is designed to fit both high roof and mid roof vans, providing a versatile sleeping solution for your van life adventures.

PRODUCT IMAGE
TR0301B
Transit Bed System
Installation Guide
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
1
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
All Flatline Van Co products must be properly assembled and secured before attaching to your vehicle.
Improper attachment could result in an automobile accident, and could cause serious bodily injury or death
to you or to others involved. You are responsible for assembling and securing Flatline Van Co products to
your vehicle, checking the mounting points and attachments prior to use, and regularly inspecting the
products for wear and or damage. We always recommend you use a professional to install any aftermarket
accessories to your vehicle. If you have no mechanical experience and are not thoroughly familiar with the
installation procedures, you must have the product installed by a professional installer or other qualified
persons. The responsibility is yours and must be taken seriously for everyone's safety.
thanks.
2
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
THANK YOU!
ARE YOU EXCITED ABOUT YOUR NEW TRANSIT BED SYSTEM? HERE ARE A FEW
THINGS TO DO BEFORE BEGINNING THE INSTALLATION PROCESS--
• PLEASE INSPECT THE PRODUCT TO ENSURE THERE WAS NO
DAMAGE INCURRED DURING SHIPPING.
• IF THERE IS DAMAGE TO REPORT, PLEASE CONTACT OUR
CUSTOMER SERVICE DEPARTMENT AS SOON AS POSSIBLE.
• NEXT, USING THE “PACKAGE CONTENTS” PAGE, CHECK
INVENTORY AND FAMILIARIZE YOURSELF WITH THE PARTS
AND HARDWARE.
• GATHER ALL TOOLS REQUIRED FOR INSTALL.
-5/16 HEX KEY ALLEN WRENCH
ADDT’L TOOLS-
ADVENTURE WAGON KIT INSTALL-
-9/16” SOCKET OR WRENCH
DIY BRACKET INSTALL-
-9/16” SOCKET OR WRENCH (IF L-TRACK INSTALLED)
-5/32 HEX KEY ALLEN WRENCH (FOR SUPPLIED DIY HARDWARE)
• IT’S RECOMMENDED TO HAVE A SECOND SET OF HANDS
WHEN INSTALLING THE BED RAILS TO HELP LEVEL THEM.
COMPATIBILITY-
2015+ FORD TRANSIT 148" HIGH ROOF AND MID ROOF VANS. NOT
COMPATIBLE WITH THE TRANSIT 148 HIGH ROOF EXTENDED OR ANY
PASSENGER VAN MODEL.
TOOLS
5/16 ALLEN KEY
5/32 ALLEN KEY
PACKAGE CONTENTS
3
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
BED RAIL-
DRIVER
QTY - 1
BED RAIL-
PASSENGER
QTY - 1
FRONT BED
PANEL
QTY - 1
MID BED
PANEL
QTY - 1
REAR BED
PANEL
QTY - 1
HARDWARE PACK
4
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
3/8 SCREW CUSHION
WASHER
QTY - 6
3/8 SCREW FLAT
WASHER
QTY - 6
3/8-16 X 1 SOCKET HEAD
HEX DRIVE SCREW
QTY - 6
L-TRACK STUD
QTY - 4
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
LET’S GET STARTED!
NOTE- THE FLAME LOGO IS ON THE FRONT OF
THE BED RAIL AND FACES THE FRONT OF THE VAN.
5
DIY MOUNT SLOTS
MEASURE TO THIS EDGE (PANEL ADDS 1.5”)
L-TRACK OR ADWAG
KIT MOUNT SLOTS
FRONTREAR
The Transit Bed System is designed to be installed by using either the FVC DIY Bed Mount Kit, or installing directly into your Adventure
Wagon equipped van. The Bed Rails have mounting slots to accommodate either installation method with ease.
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
Please refer to the DIY Bed Mount Kit installation guide first
before attempting to install the Bed System.
With the bed mount installation you want to hold the bed rail up
at the desired height (you can mark with painters tape to double
check if preferred) and then insert the hardware provided with the
DIY Bed Mount Kit as show in the image to the right. Tighten
down and repeat on both sides.
6
USE 1/4-20 FLANGE HEAD
BUTTON HEAD SCREWS
SUPPLIED WITH DIY BED
MOUNT KIT.
DIY BRACKET MOUNTING
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
If you’ve installed L-Track onto your DIY Bed Mount Kit (more info
provided in Diy Bed Mount Kit Install Guide) then you will follow
the same procedure as mentioned in previous page with the
exception of mounting your L-Track anchors first. Keep in mind
that the L-Track anchors center on the flat spot of the key way as
shown in the image below.
7
L-TRACK STUD
WILL LINE UP WITH
THIS KEY WAY
L-TRACK MOUNTING
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
Once you have your Bed Rails up and fully mounted, you can
simply place the Bed Panels on and fasten them using the 3/8-16
Socket Head Screws, 3/8 Flat Washer, and 3/8 Cushioning
Washer, in that order (see Figure 1)
8
FIGURE 1
• 3/8 CUSHION WASHER
• 3/8 FLAT WASHER
• 3/8-16 SOCKET HEAD SCREW
PERIODICALLY INSPECT THE FASTENERS
TO ENSURE THEY REMAIN TIGHT. THE RUBBER
WASHER IS PRESENT TO REDUCE VIBRATION
RELATED LOOSENING, BUT IT IS NOT UNCOMMON
FOR THE FASTENERS TO LOOSEN UP OVER TIME
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
The diagram below provides overall dimensions of the bed panels.
It also shows the dierent mounting positions to extend the bed
panels for a longer bed. The 3rd panel is also removable for vans
equipped with flares (pop outs)
• Min install width 63” (between van walls)
• Max install width 67.75” (between van walls)
• Max height w/brackets 59”
• Min height w/brackets 36”
9
62.75” PANEL
72.25” 75.25”
72”
75”
FIGURE 2
60”
FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576
GET OUT AND EXPLORE!
LEAVE US A REVIEW
Happy with your new FVC product? We would love to hear (and see) from you! Head to
the product page and click "Leave Review." Add a short review and upload a few photos
to be showcased on the product page.
SHARE YOUR PHOTOS WITH US
We love seeing how our customers use their FVC products and following along with your
adventures. Tag us in your photos with @flatlinevanco or send them to us via email. We
love posting customer pictures in our feed!
CUSTOMER SUPPORT
If you are having any issues with your product, please reach out, and we will make it right.
FVC is a company of van and outdoor enthusiasts that design and use our own products,
so we want you to be as stoked on your new parts as we are!
thanks!
@flatlinevanco
facebook.com/flatlinevanco
youtube.com/flatlinevanco
support@flatlinevanco.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

FVCO TR0301B Installation guide

TR0301B
Brand
FVCO
Model
TR0301B
Type
Installation guide

FVCO TR0301B Transit Bed System offers a comfortable sleeping solution for your Ford Transit van. It features adjustable bed rails that can be mounted using the DIY Bed Mount Kit or directly into Adventure Wagon equipped vans. The bed panels are easily attached to the rails using provided hardware, creating a sturdy and secure sleeping platform. The system is designed to fit both high roof and mid roof vans, providing a versatile sleeping solution for your van life adventures.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents