2. BodyCraft
  3. F735

BodyCraft F735 Owner's manual

  • Hello! I've reviewed the Owner's Manual for the BODYCRAFT F735 Oly Plate Holder. This document provides detailed instructions on how to assemble the plate holder and attach it to specified power racks, along with parts lists and torque specifications. I'm here to assist you with any questions you might have about the assembly or features described in the manual.
  • What tools are recommended for assembly?
    What is the recommended torque for the 1/2 inch bolts and nuts?
    What is the recommended torque for the Oly Plate Horn bolts?
Base Lot Number: _ _ _ _ _ _ _ _ _ _ _ _ _
Purchased Date: ___ / ___ / ______
Dealer’s Name:__________________________
Please register your products at:
https://www.bodycraft.com/product-registration/
Owner’s Manual
1
F735 Oly Plate Holder Option
for the BodyCraft F430 / F730 PRO (Power Rack) or F438 / F738 (RFT PRO)
Open your Camera
App and point it at
the QR Code
Assembled Parts List
F735 v1.3
To see in
FULL COLOR
& additional information,
scan this QR code.
Part # Assembly Parts List QTY
F735-501-ASM Frame, Top, Rt & Lt - Assembly 2
F735-502 Frame, Upright, for Oly Plate Storage 2
F735-503-ASM Frame, Bottom, Rt & Lt - Assembly 2
F735-504-ASM Oly Plate Horn - Assembly 8
F735-514-ASM
Adjustable Foot, for Lower Base Frame -
Assembly 2
Part # Assembly Hardware QTY
F735-505 Nut, Nylon Lock 1/2" - BLACK 8
F735-506 Washer, Spring 3/8" - BLACK 8
F735-507 Bolt, Hex Head 1/2" x 4-1/2" - BLACK 4
F735-508 Bolt, Hex Head 1/2" x 3-1/4" - BLACK 4
F735-509 Bolt, Hex Head 1/2" x 2-1/2" - BLACK 8
F735-510 Bolt, Hex Head 3/8" x 1-1/4" - BLACK 8
F735-511 Washer, Flat 1/2" - BLACK 16
F735-512 Washer, Flat 3/8" - BLACK 8
TORQUE WRENCH 3/8
DRIVE
F735 - Product Assembly
SOCKET SET 3/8 DRIVE & 6” EXT
(Only 9/16 & 3/4 Sockets needed)
OPEN & CLOSED WRENCHES
(Only 9/16 & 3/4 is needed)
THE FOLLOWING TOOLS ARE RECOMMENDED FOR ASSEMBLY:
2
STEP 1: Installation of the Main Frame Assemblies
Loosely attach the Frame, Top, Rt & Lt Sides - Assembly
(501-ASM) & the Frame, Bottom, Rt & Lt Sides -
Assembly (503-ASM) to the Frame, Uprights (502) using:
● Eight BOLTS, Hex 1/2" x 2-1/2”
(509)
● Sixteen WASHERS, Flat 1/2" (511)
● Eight NUTS, Hex Lock 1/2" (505)
STEP 2: Installation of the Oly Plate Horns
Attach all the Oly Plate Horns (504-ASM) to the Frame, Uprights (502-ASM) using:
● Eight BOLTS, Hex 3/8" x
1-1/4” (510)
● Eight WASHERS, Spring
3/8" (506)
● Eight WASHERS, Flat
3/8" (512)
TIP: Very stable and safe to start the Assembly STEPS when on its side, horizontally NOT upright.
Bottom
Frame
Top
Frame
It is extremely IMPORTANT that #502 is oriented correctly. See measurements below.
9.4”
10.25”
Top
F735 - Product Assembly
3
STEP 3: Installation of the F735 Oly Plate Holder to an F730 / F430 (Power Rack) or F738 (RFT)
Attach the Olympic Plate Rack Option (F735) to the Upright, Rear, Right & Left Sides (5) using:
● Four BOLTS, Hex 1/2"
x 3-1/4” (508)
● Four BOLTS, Hex
1/2" x 4-1/2” (507)
● Sixteen WASHERS,
Flat 1/2" (511)
● Eight NUTS, Nylon
1/2" (505)
TIP: Keep bolts loose when installing on an F730 / F430 (Power Rack) or F738 (RFT).
Then level Bottom Frames with the Adjustable Foot (514-ASM) on both sides.
● Tighten to the recommended torque specs of
20 ft-lbs (+/- 2 lbs) on all 1/2” Bolts & Nuts.
● All 8 Bolts (#510) on the Oly Plate Horns to
the torque specs of 17 ft-lbs (+/- 2 lbs).
● Tighten Jam Nuts on Adjustable Feet @ 7 ft-lbs.
STEP 4: “Torque Time” on all Frames & Oly Plate Horns
20 ft-lbs
(+/- 2 lbs)
20 ft-lbs
(+/- 2 lbs)
17 ft-lbs
(+/- 2 lbs)
TORQUE WRENCH
w/ 9/16 & 3/4 SOCKETS & WRENCHES
Recommended Tools
Horns 5%
angled up
Horns 5%
angled up
7 ft-lbs
(+/- 1 lbs)
7 ft-lbs
(+/- 1 lbs)
F730 PRO -
Power Rack
RFT PRO- Rack
Functional
Trainer
F735 - Detailed Parts List & Parts Exploded View
4
Part # Detailed Parts List QTY
F735-501 Frame, Top, Rt & Lt 2
F735-502 Frame, Upright , for Oly Plate Storage 2
F735-503 Frame, Bottom, Rt & Lt 2
F735-504 Oly Plate Horn, Metal Tube 8
F735-505 Nut, Nylon Lock 1/2" - BLACK 16
F735-506 Washer, Spring 3/8" - BLACK 8
F735-507 Bolt, Hex Head 1/2" x 4-1/2" - BLACK 4
F735-508 Bolt, Hex Head 1/2" x 3-1/4" - BLACK 4
F735-509 Bolt, Hex Head 1/2" x 2-1/2" - BLACK 8
F735-510 Bolt, Hex Head 3/8" x 1-1/4" - BLACK 8
F735-511 Washer, Flat 1/2" - BLACK 32
F735-512 Washer, Flat 3/8" - BLACK 8
F735-513 Nut, Thin, M8 for Adj. Foot - BLACK 2
F735-514 Adjustable Foot, for Lower Base Frame 2
F735-515 End Plug, Rectangular 4
F735-516 Oly Plate Holder, Plastic Sleeve 8
F735-517
Oly Plate Holder, Plastic End Cap -
Round 8
F735-518 Oly Plate Holder, Rubber Cushion 8
F735-519
Screw, Hex Recessed Flat Head 3/8" x
1-1/4" - BLACK 8
Part # Detailed Parts List QTY
Detailed Parts Exploded View
NOTE: Parts are not to scale
511
511
503
511
505
507
508
509
511
511
513
514
515
515
511
507
511
505
511
502
510
506
512
510
506
512
510
506
512
510
506
512
505
504
519
512
516
517
518
504
519
512
516
517
518
504
519
512
516
517
518
504
519
512
516
517
518
505
511
509
501
/