BodyCraft F735 Owner's manual

Brand: BodyCraft

Model: F735

Type: Owner's manual

Below you will find brief information for F735. The F735 Oly Plate Holder is designed to be an addition to the BodyCraft F430 / F730 PRO Power Rack and F438 / F738 RFT PRO. It provides storage for Olympic plates. This manual includes assembly instructions, parts lists, and recommended tools. It is essential to follow the torque specifications for a secure setup. The frame has an adjustable foot for leveling, and plate horns are attached to the frame.

Base Lot Number: _ _ _ _ _ _ _ _ _ _ _ _ _

Purchased Date: ___ / ___ / ______

Dealer’s Name:__________________________

Please register your products at:

https://www.bodycraft.com/product-registration/

Owner’s Manual

F735 Oly Plate Holder Option

for the BodyCraft F430 / F730 PRO (Power Rack) or F438 / F738 (RFT PRO)

Open your Camera

App and point it at

the QR Code

Assembled Parts List

F735 v1.3

To see in

FULL COLOR

& additional information,

scan this QR code.

Part # Assembly Parts List QTY

F735-501-ASM Frame, Top, Rt & Lt - Assembly 2

F735-502 Frame, Upright, for Oly Plate Storage 2

F735-503-ASM Frame, Bottom, Rt & Lt - Assembly 2

F735-504-ASM Oly Plate Horn - Assembly 8

F735-514-ASM

Adjustable Foot, for Lower Base Frame -

Assembly 2

Part # Assembly Hardware QTY

F735-505 Nut, Nylon Lock 1/2" - BLACK 8

F735-506 Washer, Spring 3/8" - BLACK 8

F735-507 Bolt, Hex Head 1/2" x 4-1/2" - BLACK 4

F735-508 Bolt, Hex Head 1/2" x 3-1/4" - BLACK 4

F735-509 Bolt, Hex Head 1/2" x 2-1/2" - BLACK 8

F735-510 Bolt, Hex Head 3/8" x 1-1/4" - BLACK 8

F735-511 Washer, Flat 1/2" - BLACK 16

F735-512 Washer, Flat 3/8" - BLACK 8

TORQUE WRENCH 3/8

DRIVE

F735 - Product Assembly

SOCKET SET 3/8 DRIVE & 6” EXT

(Only 9/16 & 3/4 Sockets needed)

OPEN & CLOSED WRENCHES

(Only 9/16 & 3/4 is needed)

THE FOLLOWING TOOLS ARE RECOMMENDED FOR ASSEMBLY:

STEP 1: Installation of the Main Frame Assemblies

Loosely attach the Frame, Top, Rt & Lt Sides - Assembly

(501-ASM) & the Frame, Bottom, Rt & Lt Sides -

Assembly (503-ASM) to the Frame, Uprights (502) using:

● Eight BOLTS, Hex 1/2" x 2-1/2”

(509)

● Sixteen WASHERS, Flat 1/2" (511)

● Eight NUTS, Hex Lock 1/2" (505)

STEP 2: Installation of the Oly Plate Horns

Attach all the Oly Plate Horns (504-ASM) to the Frame, Uprights (502-ASM) using:

● Eight BOLTS, Hex 3/8" x

1-1/4” (510)

● Eight WASHERS, Spring

3/8" (506)

● Eight WASHERS, Flat

3/8" (512)

TIP: Very stable and safe to start the Assembly STEPS when on its side, horizontally NOT upright.

Bottom

Frame

Top

Frame

It is extremely IMPORTANT that #502 is oriented correctly. See measurements below.

9.4”

10.25”

Top

F735 - Product Assembly

STEP 3: Installation of the F735 Oly Plate Holder to an F730 / F430 (Power Rack) or F738 (RFT)

Attach the Olympic Plate Rack Option (F735) to the Upright, Rear, Right & Left Sides (5) using:

● Four BOLTS, Hex 1/2"

x 3-1/4” (508)

● Four BOLTS, Hex

1/2" x 4-1/2” (507)

● Sixteen WASHERS,

Flat 1/2" (511)

● Eight NUTS, Nylon

1/2" (505)

TIP: Keep bolts loose when installing on an F730 / F430 (Power Rack) or F738 (RFT).

Then level Bottom Frames with the Adjustable Foot (514-ASM) on both sides.

● Tighten to the recommended torque specs of

20 ft-lbs (+/- 2 lbs) on all 1/2” Bolts & Nuts.

● All 8 Bolts (#510) on the Oly Plate Horns to

the torque specs of 17 ft-lbs (+/- 2 lbs).

● Tighten Jam Nuts on Adjustable Feet @ 7 ft-lbs.

STEP 4: “Torque Time” on all Frames & Oly Plate Horns

20 ft-lbs

(+/- 2 lbs)

20 ft-lbs

(+/- 2 lbs)

17 ft-lbs

(+/- 2 lbs)

TORQUE WRENCH

w/ 9/16 & 3/4 SOCKETS & WRENCHES

Recommended Tools

Horns 5%

angled up

Horns 5%

angled up

7 ft-lbs

(+/- 1 lbs)

7 ft-lbs

(+/- 1 lbs)

F730 PRO -

Power Rack

RFT PRO- Rack

Functional

Trainer

F735 - Detailed Parts List & Parts Exploded View

Part # Detailed Parts List QTY

F735-501 Frame, Top, Rt & Lt 2

F735-502 Frame, Upright , for Oly Plate Storage 2

F735-503 Frame, Bottom, Rt & Lt 2

F735-504 Oly Plate Horn, Metal Tube 8

F735-505 Nut, Nylon Lock 1/2" - BLACK 16

F735-506 Washer, Spring 3/8" - BLACK 8

F735-507 Bolt, Hex Head 1/2" x 4-1/2" - BLACK 4

F735-508 Bolt, Hex Head 1/2" x 3-1/4" - BLACK 4

F735-509 Bolt, Hex Head 1/2" x 2-1/2" - BLACK 8

F735-510 Bolt, Hex Head 3/8" x 1-1/4" - BLACK 8

F735-511 Washer, Flat 1/2" - BLACK 32

F735-512 Washer, Flat 3/8" - BLACK 8

F735-513 Nut, Thin, M8 for Adj. Foot - BLACK 2

F735-514 Adjustable Foot, for Lower Base Frame 2

F735-515 End Plug, Rectangular 4

F735-516 Oly Plate Holder, Plastic Sleeve 8

F735-517

Oly Plate Holder, Plastic End Cap -

Round 8

F735-518 Oly Plate Holder, Rubber Cushion 8

F735-519

Screw, Hex Recessed Flat Head 3/8" x

1-1/4" - BLACK 8

Part # Detailed Parts List QTY

Detailed Parts Exploded View

NOTE: Parts are not to scale

511

503

511

505

507

508

509

511

513

514

515

511

507

511

505

511

502

510

506

512

510

506

512

510

506

512

510

506

512

505

504

519

512

516

517

518

504

519

512

516

517

518

504

519

512

516

517

518

504

519

512

516

517

518

505

511

509

501

BodyCraft F735 Owner's manual

BodyCraft F735 Owner's manual

BodyCraft F735 Owner's manual

Other documents