Simply45 S45-2024U Operating instructions

INSTRUCTIONS

24-Port Unloaded Keystone Patch Panel - Unshielded,

1RU, Rear Cable Mgt Bracket, Numbered Ports

w/Labels. Black - 1 ea/Box

P/N: S45-2024U

Simply45 | Phone USA Direct: 1-954-928-8600 | Web: www.simply45.com

1. Mount the panel to the desired position on a 19"

ready rack or equivalent.

Standard 483 mm [19 In.]

Panel Rack

12345 6 78910 11 12 13 14 15

2. Follow the RJ45 module's installation instruction to

finish cable termination on each RJ45 modules.

3. Position the cable assembled RJ45 module from

back of panel and then snap in the RJ45 module

into the RJ45 window all the way down until the

latch on module is locked to panel.

Follow the installation in sequence until all required

RJ45 modules are installed.

Solid Cable

RJ45 Module

12345 6 78910 11 12 13 14 15 16 17 18 19 20 21 22 23 24

4. Expand the Foldable Cable Management Grip,

hook the grips into fixture at both ends of the

patch panel.

5. Fix the solid cables to the cable fixture hole

using cable ties.

Fixture

Foldable Cable

Management Grip

Cable Management Bracket

Cable Fixture Hole

Cable Tie

Download PDF