1
Operating Instructions 555-51220
No-Spill Cooling System Funnel Kit
Note: Please read the entire instruction list before using this product.
Cooling systems are under extreme pressure and can reach very high temperatures. Every precaution must be
taken to avoid any possible injury.
Instructions
1) Install the applicable adapter and retaining cap to your radiator our coolant tank.
2) Insert the funnel into the adapter connection. If you are using an angled adapter or
extension you must install it to the radiator adapter prior to installing it to the funnel.
3) Poor coolant slowly into the funnel until your reach approximately 1/3 of the way full.
4) Start your engine and let it run at idle.
5) Add your coolant to the radiator until the cooling system reaches full.
6) If coolant remains in the funnel, squeeze the upper radiator hose while pushing down
the stopper into the closed position
7) Remove funnel and empty excess coolant into a container.
8) Remove all adapters and reinstall the radiator cap.
9) Your cooling system is now for use.
10)The funnel can be cleaned and stored away for your next project.
