SICK WLG4S-3P2232VS03 Operating instructions

Type
Operating instructions

This manual is also suitable for

SICK WLG4S-3P2232VS03 is a sensor with a lockable Teach function. This means that you can press the Teach button for 10 seconds to unlock the Teach function for 10 minutes. After 10 minutes of inactivity, the Teach function will be locked again. You can also unlock the Teach function by activating the electrical Teach input (ET) for more than 10 seconds. The Teach release will be visualized with the yellow LED flashing 3 times.

This sensor is ideal for applications where you need to be able to teach the sensor to a new position or object without having to worry about accidentally triggering the Teach function. For example, you could use this sensor in a conveyor system to teach the sensor to the position of a product that is being conveyed. This would allow the sensor to reliably detect the product and trigger an output signal when the product reaches the sensor.

SICK WLG4S-3P2232VS03 is a sensor with a lockable Teach function. This means that you can press the Teach button for 10 seconds to unlock the Teach function for 10 minutes. After 10 minutes of inactivity, the Teach function will be locked again. You can also unlock the Teach function by activating the electrical Teach input (ET) for more than 10 seconds. The Teach release will be visualized with the yellow LED flashing 3 times.

This sensor is ideal for applications where you need to be able to teach the sensor to a new position or object without having to worry about accidentally triggering the Teach function. For example, you could use this sensor in a conveyor system to teach the sensor to the position of a product that is being conveyed. This would allow the sensor to reliably detect the product and trigger an output signal when the product reaches the sensor.

 8017220.YN69
Betriebsanleitung, Ergänzung
DEUTSCH
Bitte le
sen Sie die beiliegende Betriebsanleitung und diese
Betriebsanleitungsergänzung sorgfältig durch
.
Ergänzung/Abweichung der technischen Daten zur Betriebsanleitung
WLG4S-3 Inox:
Typ: WLG4S-3F2234VS04
Artikelnr.: 1050832
Irrtümer und Änd
erungen vorbehalten
SICK AG, D-79183 Waldkirch, Erwin-Sick-Str. 1, www.sick.com
Please
read the enclosed operating instruction and this operating instruction
supplement carefully.
Supplement/deviation of technical data of the operating instructions
WLG4S-3 Inox:
Model Name: WLG4S-3F2234VS04
Part No.: 1050832
Subject to ch
ange without notice.
SICK AG, D-79183 Waldkirch, Erwin-Sick-Str. 1, www.sick.com
1. Thesensorhasa lockableTeach(PushTeachbuttonfor10s
anditwillbeunlockedfor10min)
Teach lock:
after 10min. (without teach activity) the teach function is
locked. This is valid for mechanical Teach-Button &
for the electrical teach input (ET).
Teach unlock:
either-or press mechanical Teach-Button > 10s, or
activate electrical external Teach (ET) >10s .
Wait additional 2 s: only then, (after this additional 2s), the
teach handling is possible - as usual.
Valid for both, mechanical (Button) and electrical (ET).
Visualisation:
the teach-in release (after 10s) will visualised with the
yellow LED: flushes 3 x.
1.
DerSensoristmiteinemblockierbaremTeachausgestattet
(Teachtastemussfür10sgedrücktwerdenumdenTeachfür 10minzu
entsperren)
Teachsperre:
nach 10min. (ohne Teachaktivität) ist die Teachfunktion blockiert. Das
gilt für den mechanischen Teach-Taste &
den elektrischen Teacheingang (ET).
Teach Freigabe:
entweder mechanischen Teach-Button > 10s drücken, oder
den elektrischen Teach (ET) >10s aktivieren.
Nach einer weiteren Pause von 2s kann, wie gewohnt, wieder
geteacht werden. Gilt sowohl für mechanisch (Taste) als elektrischen
(ET) teach.
Visualisierung:
die Teachfreigabe (nach 10s) wird mit der gelben LED visualisiert: 3 x
blinken.
Operating Instruction, Supplement
ENGLISH
  • Page 1 1

SICK WLG4S-3P2232VS03 Operating instructions

Type
Operating instructions
This manual is also suitable for

SICK WLG4S-3P2232VS03 is a sensor with a lockable Teach function. This means that you can press the Teach button for 10 seconds to unlock the Teach function for 10 minutes. After 10 minutes of inactivity, the Teach function will be locked again. You can also unlock the Teach function by activating the electrical Teach input (ET) for more than 10 seconds. The Teach release will be visualized with the yellow LED flashing 3 times.

This sensor is ideal for applications where you need to be able to teach the sensor to a new position or object without having to worry about accidentally triggering the Teach function. For example, you could use this sensor in a conveyor system to teach the sensor to the position of a product that is being conveyed. This would allow the sensor to reliably detect the product and trigger an output signal when the product reaches the sensor.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages