e-mail: [email protected]
For latest product manuals:
www.omegamanual.info
OMB-DAQBOARD-2000 SERIES
High Performance PCI-Based
Data Acquisition Boards
TM
Shop online at
omega.com
User’s Guide
NORWALK, CT
The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves
the right to alter specifications without notice.
omega.com [email protected]
Servicing North America:
U.S.A. Omega Engineering, Inc.
Headquarters: Toll-Free: 1-800-826-6342 (USA & Canada only)
Customer Service: 1-800-622-2378 (USA & Canada only)
Engineering Service: 1-800-872-9436 (USA & Canada only)
Tel: (203) 359-1660 Fax: (203) 359-7700
e-mail: [email protected]
For Other Locations Visit omega.com/worldwide
OMB-DaqBoard/2000 Series User’s Manual
10-18-02
i
Manual Layout
Note: For benefit of those who have not yet installed their OMB-DaqBoard/2000 Series board, this
manual begins with a copy of the installation guide. Use the guide to install the associated
software, product support, and board.
OMB-DaqBoard/2000 Series, Installation Guide (p/n OMB-1033-0940)
Chapter 1 – Daq Systems and OMB-DaqBoard/2000 Series Devices. This chapter begins with a
discussion of the “modular concept” that is associated with Daq data acquisition systems. The
chapter then goes on to provide an overview for each DaqBoard/2000 Series board.
DBK Basics
(A Document Module)
- discusses option cards and modules (DBKs) that can be used to
enhance and expand data acquisition systems. Note that DBK Basics is not a chapter, but an
independent document module that is applicable to this user’s manual, as well as others.
Chapter 2 – System Connections and Pinouts - This chapter provides an overview of the DBK200
Series P4 adapters that can be used, for example, to obtain DB37 type connectors (P1, P2, and P3)
from the DaqBoard’s 100-pin P4 connector. Pinouts for P1, P2, P3, and P4 are included.
Chapter 3 - CE Compliance pertains to CE standards and conditions that are relevant to DaqBoard/2000
Series boards. The chapter includes CE Kit installation instructions.
Chapter 4 - Calibration lists the order in which to perform calibration-related adjustments and briefly
discusses DaqCal.exe, a program that provides on-screen instruction, graphics, and prompts.
Glossary
Reference Notes:
During software installation, Adobe
®
PDF versions of user manuals are automatically
installed onto your hard drive as a part of product support. The default location is in the
Programs Group, which can be accessed from the Windows Desktop.
A copy of the Adobe Acrobat Reader
®
is included on your CD. The Reader provides
a means of reading and printing the PDF documents. In addition to reading associated
documents that are installed onto your hard-drive as support for your product, our PDF
documents can be read directly from the CD. Note that hardcopy versions of manuals can be
ordered from the factory.
➣
DaqView and DaqViewXL – explains the use and features of the included out-of-the-box
data acquisition software.
➣
Post Acquisition Data Analysis User’s Guide – discusses three post-acquisition data
analysis programs: eZ-PostView, eZ-TimeView, and eZ-FrequencyView.
➣
For detailed information regarding specific DBKs, refer to the OMB-DBK Option Cards
and Modules User’s Manual, p/n OMB-457-0905. Each DBK section includes device-
specific hardware and software information. The document includes a chapter on power
management.
➣
For programming-related information refer to the separate Programmer’s Manual,
p/n OMB-1008-0901.
ii
10-18-02
OMB-DaqBoard/2000 Series User’s Manual
Your order was carefully inspected prior to shipment. When you receive your system, carefully
unpack all items from the shipping carton and check for physical signs of damage that may have
occurred during shipment. Promptly report any damage to the shipping agent and your sales
representative. Retain all shipping materials in case the unit needs returned to the factory.
&$87,21
Using this equipment in ways other than described in this manual may cause
personal injury or equipment damage. Before setting up and using your
equipment, you should read all documentation that covers your system.
Pay special attention to Warnings and Cautions.
Note:
During software installation, Adobe
®
PDF versions of user manuals will
automatically install onto your hard drive as a part of product support. The default
location is in the Programs group, which can be accessed from the Windows
Desktop. Initial navigation is as follows:
Start [Desktop “Start” pull-down menu]
⇒
Programs
⇒
Omega DaqX Software
You can also access the PDF documents directly from the data acquisition CD by
using the <View PDFs> button located on the opening screen.
Refer to the PDF documentation for details regarding both hardware and software.
A copy of the Adobe Acrobat Reader
®
is included on your CD. The Reader
provides a means of reading and printing the PDF documents. Note that hardcopy
versions of the manuals can be ordered from the factory.
PDF
DaqBoard 2000 Series Users Manual.pdf
Contains the OMB-DaqBoard/2000 Series hardware-related and software-related
chapters, as well as links to the .pdf files listed below. This pdf file, plus the
following constitute a complete set of documentation for the OMB-DaqBoard/2000
Series boards. Note that the Programmer’s Manual (OMB-1008-0901) and the
OMB-DBK Option Cards & Modules (OMB-457-0905) are completely separate
documents.
PDF
DaqView_DaqViewXL.pdf
Discusses how to install and use these “out-of-the-box” data acquisition programs.
PDF
PostAcquisition Analysis.pdf
This pdf consists of two documents. The first discusses eZ-PostView, a post data
acquisition analysis program. The application is included free as a part of
DaqTemp product support. The second includes information regarding eZ-
FrequencyView and eZ-TimeView. These two applications have more features than
does eZ-PostView and are available for purchase. They can; however, be used
freely during a 30-day trial period.
PDF
DBK Options.pdf
The DBK Option Cards and Modules Manual discusses each of the OMB-DBK
products available at the time of print.
PDF
ProgrammersManual.pdf
The programmer’s manual pertains to developing custom programs using
Applications Program Interface (API) commands.
Programmers should check the readme.file on the install CD-ROM for the location
of program examples included on the CD.
OMB-DaqBoard/2000 Series User’s Manual
10-18-02
iii
Table of Contents
DaqBoard/2000 Series, Installation Guide (p/n OMB-1033-0940)
1 – Daq Systems and Device Overviews
Daq Systems, the Modular Concept ……1-1
DaqBooks, DaqBoards, & Daq PC-Cards….1-2
Theory of Operation …… 1-4
DaqBoard/2000…… 1-9
DaqBoard/2001 …… 1-11
DaqBoard/2002 …… 1-13
DaqBoard/2003 …… 1-15
DaqBoard/2004 …… 1-17
DaqBoard/2005 …… 1-19
Using DBK Cards & Modules for Signal Conditioning ……1-21
Daq Software …… 1-21
Specifications – DaqBoard/2000 Series Boards …… 1-23
DBK Basics
(Document Module)
Introduction…… 1
How Do DBKs Connect to the Data Acquisition Device? …… 2
Connecting DBKs to DaqBooks, ISA-Type DaqBoards, and LogBooks …… 2
Connecting DBKs to DaqBoard/2000 Series Boards …… 3
DBK Identification Tables ….. 4
Analog Output DBKs …… 4
Digital I/O Control DBKs …… 4
Analog Signal Conditioning DBKs …… 4
Expansion and Terminal Panel Connection DBKs …… 5
Power Supply DBKs …… 5
Tips on Setting up a Data Acquisition System …… 6
Power Supplies and Power Connectors …… 7
An Introduction to Power-Related DBKs ….. 8
Calculating Your System’s Power Needs …… 10
Additional Reading ….. 12
2 – System Connections and Pinouts
Overview …… 2-1
DBK200 Series, P4 Connector Options …… 2-2
Pinouts for DaqBoard/2000 Series Boards …… 2-7
3 - CE-Compliance
Overview ……3-1
CE Standards and Directives ……3-1
Safety Conditions ……3-2
Emissions/Immunity Conditions ……3-2
CE Enhancements for DBKs ...3-3
CE Cable Kit for DaqBoard 2000/Series Boards…… 3-3
4 – Calibration
Glossary
iv
10-18-02
OMB-DaqBoard/2000 Series User’s Manual
October 2002
OMB-
1033-0940
,
rev
.
6.0
IG-1
OMB-DaqBoard/2000 Series Installation Guide
This guide tells you how to complete the following steps for a successful installation.
Step 1 – Install Software
…… page IG-2
Step 2 – Install Boards in Available PCI Bus-Slots
…… page IG-3
Step 3 – Configure Boards
….. page IG-5
Step 4 – Test Hardware
….. page IG-6
Reference Note:
After you have completed the installation you should refer to the electronic documents that
were automatically installed onto your hard drive as a part of product support. The default
location is in the Programs group, which can be accessed from the Windows Desktop.
You should keep your OMB-DaqBoard/2000 Series board’s serial number and your DaqView/2000
authorization code (if applicable) with this document. Space is provided below for recording up to 4 board
numbers and their PCI bus-slot location. The board serial number is located on the P4 connector as
indicated
in the following figure.
Serial Number Location on DaqBoard/2000 Series P4 Connector
Board Type (e.g., 2000,
2002, 2003, etc.)*
Serial Number PCI Bus-Slot Location
Board 1
Board 2
Board 3
Board 4
The host PC can support up to four OMB-DaqBoard/2000 Series Boards.
*Note: OMB-DaqBoard/2000 Series boards have device labels which read, for example, “DaqBoard/2000,”
“DaqBoard/2001,” “DaqBoard/2002,” etc. The name labels are convenient for users of more than one board type.
DaqView/2000 Authorization Code
____________________________
Customers who ordered DaqView/2000 can find their authorization code on the
authorization code sheet
located inside the sleeve of the install CD.
Note that earlier documents may refer to this as a “registration code” or “registration ID.”
Customers who did not order DaqView/2000 can run a
30-day free trial version
, as discussed elsewhere in the User’s Manual.
&$87,21
Take ESD precautions (packaging, proper handling, grounded wrist strap, etc.)
Use care to avoid touching board surfaces and onboard components. Only handle boards by their edges
(or ORBs, if applicable). Ensure boards do not come into contact with foreign elements such as oils,
water, and industrial particulate.
IG-2 OMB-DaqBoard/2000 Series Installation Guide
10-21-02
OMB-1033-0940, rev 6.0
Reference Notes:
(1) Each DaqBoard/2000 Series Board plugs into a PCI bus-slot. Consult your PC owner’s manual as needed.
(2) Be sure to read about the DBK cards and modules applicable to your acquisition system. Specific DBK information can
be found in your OMB-DBK Option Cards and Modules User’s Manual (p/n OMB-457-0905). After the install you can
navigate to the DBK manual and other relevant electronic documents from your desktop as follows:
Start
⇒
Programs
⇒
Omega DaqX Software
⇒
OMB-DaqBoard2000 Series Users
Reference Note
: Adobe PDF versions of user manuals will
automatically install onto your hard drive as a part of product
support. The default location is in the
Programs
group, which
can be accessed from the Windows Desktop. Refer to the PDF
documentation for details regarding both hardware and software.
Note that hardcopy versions of the manuals can be ordered from
the factory.
Minimum System Requirements
PC system with Pentium
®
Processor
Windows Operating System
RAM, as follows:
32 Mbytes of RAM for Windows 95/98/NT
64 Mbytes of RAM for Windows Me
64 Mbytes of RAM for Windows 2000
64 Mbytes of RAM for Windows XP
DaqBoard/2000 Series Installation, A Pictorial Overview
Step 1
–
Install Software
IMPORTANT: Software must be installed before installing hardware.
1.
Remove
previous version Daq drivers, if present. You can do this through Microsoft’s
Add/Remove
Programs
feature.
2.
Place the Data Acquisition CD into the CD-ROM drive. Wait for PC to auto-run the CD. This may
take a few moments, depending on your PC. If the CD does not auto-run, use the Desktop’s
Start/Run/Browse feature.
3.
After the intro-screen appears, follow the screen prompts.
Upon completing the software installation, continue with step 2, Install Boards in available PCI Bus-slots.
OMB-1033-0940, rev 6.0
10-21-02
OMB-DaqBoard/2000 Series Installation Guide IG-3
Step 2 – Install Boards in available PCI Bus-slots
IMPORTANT: Software must be installed before installing hardware.
IMPORTANT: Bus Mastering DMA must be Enabled
.
For a DaqBoard/2000 Series board to operate properly, Bus Mastering DMA
must be
enabled
.
Prior to installation, verify that your computer is capable of performing Bus Mastering DMA for
the applicable PCI bus-slot. Note that some computers have BIOS settings that enable [or disable]
Bus Mastering DMA. If your computer has this BIOS option, ensure that Bus Mastering DMA is
Enabled
on the appropriate PCI slot.
Refer to your PC’s owner manual for additional information regarding Bus Mastering DMA.
&$87,21
Turn off power to, and UNPLUG the host PC and externally connected equipment prior to
removing the PC’s cover and installing DaqBoard/2000. Electric shock or damage to equipment
can result even under low-voltage conditions.
Take ESD precautions (packaging, proper handling, grounded wrist strap, etc.)
Use care to avoid touching board surfaces and onboard components. Only handle boards by their
edges (or ORBs, if applicable). Ensure boards do not come into contact with foreign elements such
as oils, water, and industrial particulate.
1.
Turn
off
power to, and
UNPLUG the host PC
and externally connected equipment.
2.
Remove the PC’s cover. Refer to your PC Owner’s Manual as needed.
3.
Choose an available PCI bus-slot.
4.
Carefully remove DaqBoard/2000 Series Board from its anti-static protective bag. If you have not already done so, write
down the serial number of your board at this time. Space is provided on page IG-1.
The following figure applies to steps 5 and 6.
Removing a Blank Adapter Plate
(Steps 5 and 6)
5.
On the PC’s rear panel, loosen and remove the screw for the blank adapter plate that corresponds with the chosen PCI
bus.
6.
Remove the adapter plate for the chosen PCI slot. Refer to your PC Owner’s Manual if needed.
The following figure applies to steps 7, 8, and 9.
IG-4 OMB-DaqBoard/2000 Series Installation Guide
10-21-02
OMB-1033-0940, rev 6.0
Installing a DaqBoard/2000 Series Board
(Steps 7 through 9)
7.
Align groove in the DaqBoard/2000 Series board’s PCI edge-connector with the ridge of the desired PCI slot, and with
the PC’s corresponding rear-panel slot.
8.
Push the board firmly into the PCI slot. The board will snap into position.
9.
Secure the board by inserting the rear-panel adapter-plate screw.
10.
Using the previous steps, install additional boards into available PCI bus-slots, if applicable to your application.
11.
Replace the computer’s cover.
12.
Plug in all cords and cables that were removed in step 1.
13.
Apply power to, and start up the PC.
Note
: At this point some PCs may prompt you to insert an installation disk. While this is rare, if you do receive such a
prompt simply place the install CD-ROM into the disk drive and follow additional screen prompts.
OMB-1033-0940, rev 6.0
10-21-02
OMB-DaqBoard/2000 Series Installation Guide IG-5
Step 3
–
Configure Boards
OMB-DaqBoard/2000 Series Boards have no jumpers or switches to set. Configuration is performed, in its
entirety, through software. Refer to the following figure and steps to complete the configuration. The
numbers in the figure correspond to the numbered steps immediately following the figure.
Accessing the DaqBoard/2000 Properties Tab
1.
Run the Daq Configuration control panel applet. Navigation from the desktop to the applet is as follows:
Start
⇒
Settings
⇒
Control Panel
⇒
Daq*Configuration (double-click)
2.
Double-click on the Device Inventory’s DaqBoard2K0 icon. The DaqBoard/2000 Properties tab (used for the
entire DaqBoard/2000 Series) will appear. If the DaqBoard2K0 icon is not present, skip to the Using ‘Add
Device’ section provided below.
3.
Enter a “Device Name” in the text box, or use the default “DaqBoard2K0.” Device Name is for identifying the
specific DaqBoard/2000 Series board. Note that Device Name actually refers to the PCI slot and not to the
actual board.
4.
Verify that the “Device Type” shows the correct DaqBoard/2000 Series board, e.g., “DaqBoard/2000,
DaqBoard/2001, etc.” Note that available device types can be viewed via the pull-down list (
▼
).
5.
Confirm that the DaqBoard/2000 Series text box shows a Bus #, Slot #, and Serial Number.
If this text box is empty, use its pull-down list (
▼
) and select the serial number that matches the one for your
board.
Refer to the inside front cover page for serial number information.
IG-6 OMB-DaqBoard/2000 Series Installation Guide
10-21-02
OMB-1033-0940, rev 6.0
Using “Add Device”
This method is for users who have accessed the Daq Configuration
control panel applet, but have no DaqBoard2K icon (as described on
page 5, step 2).
(A)
After accessing the Daq Configuration control panel applet, click on
the Add Device button (see figure, right). The Select Device Type
window will appear.
(B)
Using the Device Type’s pull-down list, select the applicable board.
In the example at the right DaqBoard/2000 is selected.
(C)
Click the OK button. The DaqBoard/2000 Properties tab will appear.
This tab applies to all boards in the DaqBoard/2000 Series.
At this point, complete steps 3 through 5 from page 5.
Using “Add Device”
Step 4
–
Test Hardware
Use the following steps to test the DaqBoard/2000 Series board. Note that these steps are continued from those listed under
the previous section, “Configure Board.”
1.
Select the “Test Hardware” tab.
2.
Click the “Resource Test” button.
3.
After the test is complete, click “OK.”
System capability is now tested for the DaqBoard/2000
Series board and a list of test results appears on screen.
Note: If you experience difficulties, please consult your user
documentation (included on your CD) before calling for
technical support. Note that the user documentation
includes a troubleshooting chapter, as well as a great
deal of information regarding specific DBK cards and
modules.
Test Hardware Tab
(Condensed Screen Image)
At this point we are ready to connect signals. This is typically accomplished with the use of a DBK200 Series option.
Reference Note:
For detailed information regarding the DBK200 Series options, refer to the OMB-DBK Option Cards and
Modules User’s Manual (p/n OMB-457-0905).
During software installation, Adobe
®
PDF versions of user manuals are automatically installed onto your hard
drive as a part of product support. The default location is in the Programs group, which can be accessed
from the Windows Desktop. A copy of the Adobe Acrobat Reader
®
is included on your CD. The Reader
provides a means of reading and printing the PDF documents. Note that hardcopy versions of manuals can be
ordered from the factory.
DaqBoard/2000 Series User’s Manual
10-18-02
Daq Systems and Device Overviews 1-1
Daq Systems and Device Overviews 1
Daq Systems, the Modular Concept …… 1-1
DaqBooks, DaqBoards, and Daq PC-Cards …… 1-2
Theory of Operation, DaqBoard/2000 Series Boards …… 1-4
DaqBoard/2000 ….… 1-9
DaqBoard/2001……. 1-11
DaqBoard/2002…… 1-13
DaqBoard/2003…… 1-15
DaqBoard/2004…… 1-17
DaqBoard/2005…… 1-19
Using DBK Cards and Modules for Signal Conditioning ….. 1-21
Daq Software ……1-21
Specifications……
1-23
Daq Systems, the Modular Concept
Daq equipment and software form a modular, interrelated family of products that provide great flexibility in
data acquisition system design. This flexibility allows for the development of custom systems that are
unique to the user, and which can be optimized for his or her specific application needs. With the Daq
product line, system expansion or redesign can typically be accomplished with relative ease.
•
Primary Acquisition Device. This is the main data acquisition device, e.g., a DaqBook, DaqBoard,
or Daq PC-Card. These devices provide a vital data conversion and communications link between
the data source of transducers and signal conditioners and the data processor of the host computer.
Note the DaqBoards can be ISA-type or PCI-type.
•
DBK Option Cards and Modules. Over 35 DBK cards and modules (the number is constantly
growing) provide various types of signal conditioning and system expansion. Note that certain DBK
modules exist for the purpose of supplying power to other members of the acquisition system. The
DBK options are discussed in a DBK Basics document module and in the detailed DBK Option Cards
and User’s Manual (p/n OMB-457-0905).
Note: Only passive DBKs, such as the DBK1 BNC module, the DBK11A screw terminal card, and
the DBK40 BNC analog interface, can be used with a Daq PC-Cards.
Reference Note:
DBK options are discussed in the DBK Option Cards and Modules User’s Manual
(p/n OMB-457-0905). As a part of product support, this manual is automatically loaded
onto your hard drive during software installation. The default location is the Programs
Group, which can be accessed through the Windows Desktop.
•
Software. DaqView out-of-the-box software provides a graphical user interface with easy to read
spreadsheet formats for viewing channel data, as well as a choice of analog, digital, and bar-graph
meters. Waveform analysis can be performed, when applicable. A product support option, included
on the data acquisition CD, provides a means of performing post data analysis. More information is
included in the software-specific PDF documents that are installed on your hard-drive as a part of
product support.
1-2 Daq Systems and Device Overviews
10-18-02
OMB-DaqBoard/2000 Series User’s Manual
In addition to the included out-of-the-box software, Daq products can be controlled via user-written
custom programs through Applications Program Interface (API). Several languages are supported,
e.g., C/C++, VisualBASIC, Delphi.
DaqView and DASYLab can only be used with one OMB-DaqBoard/2000 Series
board at a time. LabView can be used with multiple boards. For multiple board use
(via custom programming) refer to the Using Multiple Devices section of the
Programmer’s Manual. During software installation from the data acquisition CD
(p/n 1022-0602), a PDF version of the Programmer’s Manual is automatically
loaded onto your hard drive as a part of product support. The default location is
the Programs Group.
Reference Note:
Programming topics are covered in the Programmer’s User Manual (p/n OMB-1008-
0901). As a part of product support, this manual is automatically loaded onto your hard
drive during software installation. The default location is the Programs directory, which
can be accessed through the Windows Desktop.
DaqBooks, DaqBoards and Daq PC-Cards
Daq products connect to one or more DBKs on their signal input side and a computer on their output side.
Each type of Daq device connects to the computer in a different way:
•
The DaqBook is an external module that connects to a computer’s enhanced parallel port (EPP)
interface or PC-Card link.
•
The DaqBoard [ISA type] board is an internal card that plugs into an ISA-bus slot within a
computer.
•
DaqBoard/2000 Series Boards plug into a PCI-bus slot, within a host PC.
•
The Daq PC-Card slides into the PCMCIA slot of a host computer, typically a notebook PC.
Features common to the Daq products include:
•
100-kHz channel-to-channel scan and gain switching (10 µs);
200-kHz for DaqBoard/2000 Series Boards.
•
512-location sequence memory that can be loaded with any combination of channels and gains.
•
Ability to access up to 256 different channels of DBK signals while maintaining the channel-to-
channel scan rate. The DBK expansion options can accommodate mixed-signal inputs from
thermocouples and RTDs to isolated high-voltage inputs and strain gages.
•
Ability to handle 8 differential or 16 single-ended signal inputs without DBK expansion units.
•
Ability to handle fixed digital I/O up to 4 TTL lines in and 4 TTL lines out (accessible only if no
analog expansion cards are in use).
OMB-DaqBoard/2000 Series User’s Manual
10-18-02
Daq Systems and Device Overviews 1-3
Daq Data Acquisition Devices
Category Device Description
DaqBook
Portable Data Acquisition Modules
12-bit: DaqBook/100, /112, /120
16-bit: DaqBook/200, /216, /260
DaqBoard/2000
Series
Plug-In Boards for PCI Bus-Slots
16-bit , 200 kHz. Six boards identified as /2000 through /2005
Primary
Acquisition
Device
DaqBoard (ISA types)
Plug-In Boards for ISA Bus-Slots
12-bit: DaqBoard/100A, /112A
16-bit: DaqBoard/200A, /216A
Analog Signal
Conditioning
Cards and modules used to condition Analog Signals
DBK/ 4, 7, 8, 9, 12, 13, 15, 17, 18, 19, 42, 43A, 44, 45, 50, 51, 52, 53, 54,
207, 207/CJC
Analog Output
Cards used to modify Analog Output Signals
DBK/ 2, 5
Digital I/O and Control
Cards and modules used to condition Digital I/O
DBK/ 20, 21, 23, 24, 25, 208
Expansion
Connections
Cards and modules used to expand the acquisition system.
DBK/ 1, 10, 11A, 35, 40, 41, 60, 200, 201, 202, 203, 204, 205, 206, 209
DBK Option
Cards and
Modules
Power Supply DBKs: 30A, 32A, 33, 34
Included Software DaqView, Post Data Acquisition Analysis Program (actual application not
specified), Visual Basic extensions, Application Programming Interface
(API)
Software
Optional Software DaqView/2000, DaqViewXL, DASYLab
1-4 Daq Systems and Device Overviews
10-18-02
OMB-DaqBoard/2000 Series User’s Manual
Theory of Operation
As implied by the following matrix, the operational material does not apply globally to every
DaqBoard/2000 Series board. For example, boards /2002, /2003, /2004 have no analog input.
For ease of understanding, each board is discussed independently, following the matrix. Note that pinouts
are provided in chapter 2.
I/O Comparison Matrix
I/O Comparison Matrix
for DaqBoard/2000 Series Boards
DaqBoard/
(PCI versions)
Analog Input
Channels
Analog Input signals enter
through P4 , go to MUX, to
PGA, to Gain & Offset
Amplifier, then to Analog-
to-Digital Converter (ADC)
Analog Output
Channels
Digital Signals go through
Digital-to-Analog
Converters, then through
“DAC Out” on P4.
Digital I/O
Channels
Digital signals pass
through one 16-bit
Digital I/O Port and
three 8-bit Digital I/O
Ports located on P4.
Counter/
Timers
Four 16-bit Counter
Input signals and Two
16-bit Timer Output
signals via P4 and
System Controller.
2000
16
2
40
6
2001
16
4
40
6
2002
-- --
40
6
2003
--
4
-- --
2004
--
4
40
6
2005
16
--
40
6
OMB-DaqBoard/2000 Series User’s Manual
10-18-02
Daq Systems and Device Overviews 1-5
Synchronous Input Operations
The DaqBoard/2000 Series products allow synchronous scanning and acquisition of Analog Input, Digital
Input and Counter Input Data at up to 200kHz aggregate scanning rates. The Analog Input data can be
either main unit or expansion modules from P1 compatible analog input modules. The Digital Input data
can be main unit 8-bit P2 (8255) digital inputs, 16-bit P3 digital inputs or P2 compatible DBK digital input
expansion modules.
Analog Input Channels
The DaqBoard/2000 Series boards that offer analog input (see matrix) allow analog input configuration for
the board as well as the P1 compatible DBK analog input expansion modules.
Channel Selection and Mode Settings
The main unit accepts up to 16 single ended or up to 8 differential-ended inputs and can be programmed for
single-ended or differential-ended on a per channel basis. Just one analog channel is sacrificed when a
DBK expansion module is enabled. See DBK documentation in the DBK Option Cards & Modules User’s
Manual (p/n OMB-457-0905) for further information.
Channel Range and Polarity
Each main unit channel also may be programmed for either unipolar or bipolar mode with gain settings of
1,2,4,8,16,32 and 64.
Channel Sampling Interval
The DaqBoard/2000 Series boards allow programmable sampling intervals of 5us or 10us on a per channel
basis. When a higher degree of accuracy is desired, this mode allows channels (which change slowly) to be
sampled at a longer interval. Note that shorter intervals can be used when sampling channels that change
rapidly. Each 5us or 10us interval reduces the maximum aggregate acquisition rate for the entire scan by
that amount.
Digital Input Channels
DaqBoard/2000 Series boards allow either synchronous scanning of digital input channels or asynchronous
I/O operations for all configured digital channels.
Counter Input Channels
DaqBoard/2000 Series boards allow synchronous scanning of the 4 16-bit counter input channels. The four
16-bit counter channels can also be cascaded into two 32-bit counter channels. For either cascaded or
non-cascaded counter channels each channel can be configured for:
•
Pulse Counting Mode – specifies that each counter should be cleared upon being read and placed into
the input scan.
•
Totalize Counting Mode – specifies that each counter is to free-run and not be cleared during the input
acquisition.
Synchronous Input Acquisition Clocking
DaqBoard/2000 Series boards allow clocking of the synchronized inputs either by an internal,
programmable pacer clock or by external clocking. These products use a sequencer to implement a
multiplexing approach to gathering the input data. This means that with either internal or external clocking
the entire channel scan (including the sampling time for each channel) may not exceed the maximum
aggregate rate of 200kHz.
1-6 Daq Systems and Device Overviews
10-18-02
OMB-DaqBoard/2000 Series User’s Manual
Synchronous Output Operations
DaqBoard/2000 Series boards allow synchronous output of any D/A or P3 16-bit Digital channels available
at up to 100kHz for each channel. All D/A channels available and the 16-bit P3 Digital channel may have
output streamed to them and clocked out synchronously. The D/A channels may be configured for
waveform output and the P3 digital channel may be configured for streamed digital pattern output using the
same clock sources.
Output Channel Configuration
Analog Output Channels
Each D/A channel can be configured for waveform output individually. If the D/A channel is not
configured for waveform output it then is available for asynchronous output operations.
Digital Pattern Output Channel
The 16-bit P3 Digital Port can be configured for streamed digital pattern output. If not configured for
streamed digital pattern output operations it then may be used for asynchronous digital I/O operations.
Synchronous Output Clocking
DaqBoard/2000 Series boards allow clocking of the synchronized output by the acquisition clock source, an
internal, programmable pacer clock or by an external clock source. When the clock source generates a new
clock signal all outputs are updated concurrently. Regardless of the clock source, the clock may not exceed
the maximum update rate of 100kHz.
Synchronous Output Data Source
DaqBoard/2000 Series boards allow the data source for synchronized output operations to be that of a
memory based buffer or a file located on a mass storage medium. With either type of output data source,
the output data for all the channels are contained in the buffer and/or file. The file path may be any file
located on the on the machine or network accessible file.
Asynchronous I/O Operations
DaqBoard/2000 Series boards allow asynchronous input of any counter or digital channel that is not
currently configured for synchronous acquisition. The boards also allow for asynchronous output to any
D/A channels not currently configured for waveform output. Likewise, the 16-bit P3 digital port can be
used for both asynchronous input and output operations if it is not currently configured for streamed pattern
output operations. In addition, the timer outputs can be programmed at any time regardless of the current
state of synchronous or asynchronous operations on other channels.
Digital I/O Channels
Local 8255 Channels
DaqBoard/2000 Series boards [which have digital I/O capabilities] have an implemented Intel 8255 core in
the digital I/O logic on the P2 port of the product. With the Intel 8255 there are three 8-bit wide ports
available for I/O and one 8-bit wide port for configuration purposes. The configuration port is used to
configure the other three 8-bit ports for either input or output operations.
Local 16-bit P3 Port
The 16-bit P3 Digital Port can be used as either an input port, or an output port. With this port, no
configuration is required, as the port simply outputs when written to and inputs when read.
Expansion Digital I/O
DaqBoard/2000 Series boards [that have digital I/O capabilities] have the ability to expand these through
the P2 port and the connection of applicable digital I/O expansion modules. These modules are discussed
in the DBK Option Cards & Modules User’s Manual. When using the digital I/O expansion modules the
local P2 Intel 8255 digital I/O becomes inaccessible in lieu of the expansion modules. These expansion
modules provide additionally Intel 8255 ports as well as input isolation for applications that require the
expanded capabilities.
OMB-DaqBoard/2000 Series User’s Manual
10-18-02
Daq Systems and Device Overviews 1-7
Pulse Stream Output Using Timers
The boards allow the generation of output pulses based upon a programmable setting. These output timers
can be set at any time regardless of the state of any synchronous or asynchronous operations which are
currently taking place on other channels.
Analog Output Channels
The boards [that have analog output capabilities] have the ability to output analog data to any of the
available (up to four) D/A channels. Each D/A channel may be asynchronously updated by an application if
the D/A channel is not currently being used for waveform output operations.
Counter Input Channels
With exception of DaqBoard/2003, the boards have counter input capabilities and have the ability to read
counter input [if the counter channel is not configured for synchronous acquisition]. As in the case of
synchronous operations the 4 16-bit counter input channels can be used individually or cascaded into two
32-bit counter channels. For either cascaded or non-cascaded counter channels each channel can be
configured for:
•
Clear on Read Mode - specifies that each counter should be cleared (reset to 0) upon being read.
•
Continuous Totalize Mode – specifies that each counter is to free-run and not be cleared during
the read operation.
Operation Matrix
*
Operation
2000 2001 2002 2003 2004 2005
Synchronous Input
Analog Main Unit Inputs (P1) Yes Yes No No No Yes
Analog Expansion Input (P1) Yes Yes No No No Yes
Counter Inputs (P3) Yes Yes Yes No Yes Yes
Digital Main Unit Inputs (P2) Yes Yes Yes No Yes Yes
Digital Expansion Inputs (P2) Yes Yes Yes No Yes Yes
Digital Inputs (P3) Yes Yes Yes No Yes Yes
Synchronous Output
Analog D/A Waveform Output Yes(2) Yes(4) No (0) Yes(4) Yes(4) No (0)
Streamed Digital Output (16-bit P3) Yes Yes Yes No Yes Yes
Asynchronous IO
Main Unit Digital I/O Yes Yes Yes No Yes Yes
Expansion Digital I/O Yes Yes Yes No Yes Yes
Timer Output (Pulse Generation) Yes Yes Yes No Yes Yes
Analog Output Yes(2) Yes(4) No (0) Yes(4) Yes(4) No (0)
* A similar matrix, intended to highlight board differences at a glance, is presented on page 1-4.
1-8 Daq Systems and Device Overviews
10-18-02
OMB-DaqBoard/2000 Series User’s Manual
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
