Grizzly T1250 Owner's manual

Brand: Grizzly

Model: T1250

Type: Owner's manual

Grizzly T1250 is a heavy-duty workbench designed for close-in detail work, such as soldering, assembly work, and gunsmithing. Its solid beechwood top, all-steel frame construction, and reinforced corners ensure rock-solid stability and long-lasting durability. With a maximum weight capacity exceeding 2500 pounds, it can handle even the most demanding projects. The workbench also features adjustable steel bars for customizable shelving and racking configurations, making it a versatile addition to any workshop or garage.

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL T1250

25" X 96" HEAVY-DUTY

BEECH WORKBENCH

INSTRUCTIONS

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MFD. SINCE 11/17) #ES19301 PRINTED IN CHINA

Introduction

This workbench is designed to be used with

chairs or stools and double as a desk, making it

ideal for close-in detail work, such as soldering,

assembly work, gunsmithing, etc. Featuring a

solid beechwood top, all-steel frame construction,

and re-inforced corners—rock-solid and built to

last a lifetime.

V1.11.17

Inventory

Specifications

• Workbench Top (Width x Length) ...25" x 96"

• Footprint (Width x length) ............... 20" x 91"

• Height ......................................................37"

• Maximum Weight Capacity ......... 2500+ lbs.

• Approximate Assembly Time .......45 Minutes

Needed for Assembly

• Additional Person ....................................... 1

Figure 1. Model T1250 25" x 96" Heavy-Duty

Beech Workbench.

Description Qty

A. Workbench Top ......................................... 1

B. Center Frame ............................................. 1

C. End Frames ................................................ 2

D. Upper Supports .......................................... 4

E. Lower Supports .......................................... 2

F. Rubber Feet M10-1.5 x 35 .......................... 6

G. Hardware Bag ..............................................

— Support Brace ......................................... 1

— External Corners ..................................... 6

— Internal Corners .................................... 12

—Button Hd Cap Screws M8-1.25 x 55 ... 38

— Flat Washers 8mm ................................ 68

— Lock Nuts M8-1.25 ................................ 30

—Wrench 13/14mm Open-Ends ................. 1

— Hex Wrench 5mm ................................... 1

H. Steel Bars

⁄8" x 11

⁄4" ............................... 12

Figure 2. Inventory.

-2-

Model T1250 (Mfd. Since 10/17)

Assembly

4. Secure end frames and upper supports with

(4) external corners and (4) internal corners,

using (12) M8-1.25 x 55 button head cap

screws, (24) 8mm flat washers, and (12)

M8-1.25 lock nuts (see Figure 5). DO NOT

fully tighten fasteners yet.

1. Lay workbench top upside-down on a pro-

tected surface, such as cardboard or a

blanket.

Note: Bottom-side of workbench top has

threaded holes.

2. Attach both end frames and center frame to

workbench top with (4) M8-1.25 x 55 button

head cap screws and (4) 8mm flat wash-

ers (see Figure 3). DO NOT fully tighten

fasteners yet.

3. Attach each upper support to work-

bench top with (4) M8-1.25 x 55 button

head cap screws and (4) 8mm flat wash-

ers (see Figure 4). DO NOT fully tighten

fasteners yet.

5. Secure center frame and upper supports

with (1) support brace and (4) internal cor-

ners, using (8) M8-1.25 x 55 button head

cap screws, (16) 8mm flat washers, and (6)

M8-1.25 lock nuts (see Figure 6). DO NOT

fully tighten fasteners yet.

Figure 3. End frame and center frame attached

to workbench top.

x 2

End Frame

Center

Frame

End of

Workbench Top

Figure 6. Center frame and upper supports

secured together with brace and corners.

x 8

Upper Frame

Support

Center

Frame

Support

Brace

Internal

Corner

Figure 4. Upper support attached to workbench

top.

x 4

Upper

Support

Figure 5. End frame and upper support secured

together with corners.

x 12

End Frame

Internal

Corner

External Corner

Upper

Support

Side of

Workbench

Top

Model T1250 (Mfd. Since 10/17)

-3-

6. Secure end frames, center frame, and

lower supports with (2) external corners and

(4) internal corners, using (10) M8-1.25 x 55

button head cap screws, (20) 8mm flat wash-

ers, and (10) M8-1.25 lock nuts (see Figure 7).

DO NOT fully tighten fasteners yet.

7. Thread (6) rubber feet into bottoms of frames

(see Figure 8).

Figure 9. Steel bars inserted.

Center

Frame

End Frame

Steel Bars

Figure 7. End frame, center frame, and lower

supports secured together with corners.

Upper Frame

Support

x 6

End Frame

Center Frame

x 4

Internal

Corner

Internal

Corner

External

Corner

Figure 8. Rubber feet attached.

End Frame

Center

Frame

Rubber

Foot

8. Turn workbench upright and make sure it is

centered over end frames and supports (not

leaning to one side or the other), then fully

tighten all fasteners.

9. Adjust feet as necessary to ensure work-

bench sits firmly on ground and does not

rock.

Option: Lay a level across workbench from

side-to-side and end-to-end when adjusting

feet.

10. Insert steel bars through end support frames

as desired (see Figure 8).

Note: End frames have several

holes, allowing for numerous shelving and

racking configurations.

-4-

Model T1250 (Mfd. Since 10/17)

Parts Breakdown & List

REF PART # DESCRIPTION REF PART # DESCRIPTION

1 PT1250001 WORKBENCH TOP 25 X 96 X 1-3/4 9 PT1250009 BUTTON HD CAP SCR M8-1.25 X 55

2 PT1250002 END FRAME 10 PT1250010 FLAT WASHER 8MM

3 PT1250003 CENTER FRAME 11 PT1250011 LOCK NUT M8-1.25

4 PT1250004 UPPER SUPPORT 12 PT1250012 RUBBER FOOT M10-1.5 X 35

5 PT1250005 LOWER SUPPORT 13 PT1250013 STEEL BAR 5/8 X 11-3/4

6 PT1250006 SUPPORT BRACE 14 PT1250014 WRENCH 13/14MM OPEN-ENDS

7 PT1250007 EXTERNAL CORNER 15 PT1250015 HEX WRENCH 5MM

8 PT1250008 INTERNAL CORNER

BUY PARTS ONLINE AT GRIZZLY.COM!

Scan QR code to visit our Parts Store.

Grizzly T1250 Owner's manual

Grizzly T1250 Owner's manual

Grizzly T1250 Owner's manual

Related papers

Other documents