PROLINK PIC3001WP Quick Installation Guide

PIC3001WP and PIC3002WN Quick Setup Guide for Android 10 Users

Step 1

Power up the IP Camera and place the IP Camera and phone at about 1 – 3 feet distance of the

router.

Note: Please make sure the phone is connected to the router wirelessly on 2.4GHz wireless network.

The IP Camera does not support 5GHz wireless network.

Step 2

Download and install PROLiNK mCam App

Step 3

Tap “Open” to open PROLiNK mCam App and Allow all the permission for the PROLiNK mCam App to

work.

Step 4

Tap “+” symbol to add the camera and scan the Camera QR Code on the device.

Step 5

Once the IP Camera is up, there will be audio saying “Please use mobile phone for Wi-Fi

configuration” and the IP Camera LED blinks Blue and Red. Tap “Next”

Step 6

Key in the Wi-Fi SSID and key in the Wi-Fi Password then tap “Next”

Note: Please key in exactly same Wi-Fi SSID or Wi-Fi Name that your phone is connected. Below is

the example of the configuration.

Step 7

Please wait while the IP Camera Wi-Fi is being configured

Step 8

For the first-time setup, Input the default IP Camera password. The default IP Camera password is

“prolink”. Then tap “Next”

Step 9

Key in new IP Camera password and tap “OK” to complete the setup

Note: The new IP Camera password must be between 6 to 32 characters in length and contains

combination of both Alphabets and Numbers

This manual is also suitable for