If the commode has a white terminal block:
1. Remove gray plastic connector
A
from end of water valve wiring.
2. Strip ends of red and black wires 0.25 in.
3. Attach red wire to #2 terminal and black wire to #3 terminal on terminal block
B
.
ATTENTION!
WATER VALVE REPLACEMENT WIRING INSTRUCTIONS
A B
black wire
red wire
Dometic Corporation, Sanitation Division
13128 State Rt. 226, P.O. Box 38
Big Prairie, OH 44611 USA
1-800-321-9886 • Fax: 330-496-3097
www.Dometic.com
REVISION A
Form No. 600347186 9/17
©2017 Dometic Corporation