Qlogic 3000 User manual

Brand: Qlogic

Model: 3000

Category: Networking

Type: User manual

This manual is also suitable for

NE0154601-00 A

QLogic 3000 and 3100 Series Intelligent

Ethernet Adapters

Users Guide

ii NE0154601-00 A

QLogic 3000 and 3100 Series Intelligent Ethernet Adapters Users Guide

Version 4.6

Information furnished in this manual is believed to be accurate and reliable. However, QLogic Corporation assumes no

responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its

use. QLogic Corporation reserves the right to change product specifications at any time without notice. Applications

described in this document for any of these products are for illustrative purposes only. QLogic Corporation makes no

representation nor warranty that such applications are suitable for the specified use without further testing or

modification. QLogic Corporation assumes no responsibility for any errors that may appear in this document.

Document Revision History

Version 4.0, 1/07/09

Version 4.1, 1/27/09

Version 4.2, 3/23/09

Version 4.3, 4/09/09

Version 4.4, 4/30/09

Version 4.5, 4/30/09

Version 4.6, 6/15/09

Changes Sections Affected

Updated with new release information. All

NE0154601-00 A iii

Table of Contents

Preface

Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Related Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Documentation Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

1Overview

Obtaining the Latest Software Release Information. . . . . . . . . . . . . . . . . . . 1-1

Supported QLogic 3000 and 3100 Series Intelligent Ethernet Adapters . . . 1-2

Application Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

2 System Requirements

Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

SFP+ Optical Module Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

System and Software Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Supported QLogic Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

3 Installation Instructions

QLogic Adapter Installation and Verification. . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Pre-installation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

QLogic Adapter Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Verify the QLogic Adapter Installation . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Windows Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Windows Server Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Windows Server 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Windows Server 2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

iv NE0154601-00 A

QLogic 3000 and 3100 Series Intelligent Ethernet Adapters Users Guide

Version 4.6

Linux Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Verify and Remove Existing QLogic Adapter Driver and Tools Package 3-4

Install the Driver (RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Red Hat

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

SUSE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

QLogic Adapter Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

4 Hardware Installation

QLE3044 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Ethernet Port Mapping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

QLE3044 Status LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

QLE3044 Bracket Removal and Replacement . . . . . . . . . . . . . . . . . . 4-3

QLE3142 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

QLE3142 Status LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

QLE3142 Bracket Removal and Replacement . . . . . . . . . . . . . . . . . . 4-5

5 Windows Server 2003 and 2008 Driver Installation and Configuration

Windows Server Driver Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Windows Server Service Pack Requirements . . . . . . . . . . . . . . . . . . . 5-1

Firmware ROM Image Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Windows Server Driver Installation and Verification. . . . . . . . . . . . . . . . . . . 5-2

Windows Server Driver Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

General Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

Advanced Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Information Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15

Diagnostics Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16

Statistics Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17

Flash Update Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18

Driver Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19

Resources Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20

Configure the QLogic Adapter in Windows Server. . . . . . . . . . . . . . . . . . . . 5-21

Uninstall the QLogic Adapter Driver in Windows Server . . . . . . . . . . . . . . . 5-23

QLogic Adapter Diagnostic Tests — Windows Server . . . . . . . . . . . . . . . . . 5-24

Windows Server Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25

Performance Testing the QLogic Adapter with ntttcp . . . . . . . . . . . 5-26

ntttcp Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27

ntttcps and ntttcpr Command Line Options . . . . . . . . . . . . . . . . 5-28

NE0154601-00 A v

QLogic 3000 and 3100 Series Intelligent Ethernet Adapters Users Guide

Version 4.6

Tcp1323Opts Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-29

Modifying the Tcp1323Opts Parameter . . . . . . . . . . . . . . . . . . 5-30

Creating the Tcp1323Opts Parameter . . . . . . . . . . . . . . . . . . . 5-31

Setting the TcpWindowSize Parameter . . . . . . . . . . . . . . . . . . . . . . 5-32

6 Linux Driver Installation and Configuration

Linux Driver Checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Locate the Firmware ROM Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Locate the Driver File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Verify the Firmware Version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Verify the Driver Version and Module Information . . . . . . . . . . . . . . . . 6-2

Locate the QLogic Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Build the Linux Driver Source Code . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Enable the Inbox Kernel GPL and Commercial Drivers . . . . . . . . . . . 6-2

Check for MSI-X Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Check for Receive Side Scaling (RSS) Support . . . . . . . . . . . . . . . . . 6-4

Inbox Kernel GPL Driver and Blacklisting . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4

Preparing for QLogic Adapter Driver Installation . . . . . . . . . . . . . . . . . . . . . 6-5

QLogic Adapter Driver Installation (RPM Format) . . . . . . . . . . . . . . . . . . . . 6-5

Install the Linux Driver Source in RPM Format . . . . . . . . . . . . . . . . . . 6-5

Create the Binary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

Install the Binary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

Install the QLogic Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

Linux QLogic Adapter Driver Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

Ethtool Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

Configure the QLogic Adapter on Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

Uninstall the Commercial GPL Driver and Tools Package . . . . . . . . . . . . . . 6-8

Diagnostic Tests for the QLogic Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

Linux Performance Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

Performance Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

Using the iperf Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

Optimization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

7 Linux Configuration for Bonding Mode and Virtual LAN (VLAN)

Linux Bonding Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Active-Backup or Mode=1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2

Round-Robin or Mode=0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3

Bonding Driver Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4

vi NE0154601-00 A

QLogic 3000 and 3100 Series Intelligent Ethernet Adapters Users Guide

Version 4.6

Bonding Driver Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4

arp_interval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5

arp_ip_target . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5

downdelay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5

lacp_rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5

QLogic Adapter Bonding Modes Under Linux . . . . . . . . . . . . . . . . . . . 7-5

Configuring Virtual LAN (VLAN) Under Linux. . . . . . . . . . . . . . . . . . . . . . . . 7-7

8 Firmware Management

Windows Server Dynamic Firmware Download . . . . . . . . . . . . . . . . . . . . . . 8-1

Linux Dynamic Firmware Download. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

9 Troubleshooting Guidelines

Unable to Boot the Host System with the QLogic Adapter Installed . . . . . . 9-1

Unable to Send/Receive Network Traffic Using the QLogic Adapter . . . . . . 9-1

Troubleshooting Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2

Windows Server Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2

Linux Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3

Check for System Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3

Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3

Windows Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4

Caveats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4

MSI-X Interrupts for Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4

PCI Express Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4

Windows Server 2003 RSS and SNP Support. . . . . . . . . . . . . . . . . . . . . . . 9-6

A Diagnostic Utility Commands

B Solaris Driver, nxflash Utility, and Firmware Installation

QLogic Adapter Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

nxflash Utility and Firmware Files Installation. . . . . . . . . . . . . . . . . . . . . . B-2

C Flash Update

Flash Update and Tool Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1

Flash Update Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1

nxflash Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1

Windows Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1

Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2

NX Live CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2

NX Live USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2

NX Live Menu Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-3

NE0154601-00 A vii

QLogic 3000 and 3100 Series Intelligent Ethernet Adapters Users Guide

Version 4.6

QLogic Adapter Flash Update — Windows Server . . . . . . . . . . . . . . . . . . . C-3

Using the Flash Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-4

Flash Update Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-5

Updating the Flash on Multiple Standalone Adapters . . . . . . . . . . . . . C-7

QLogic Adapter Flash Update — Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-8

Using the Flash Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-8

Flash Update Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-10

Glossary

List of Figures

Figure Page

4-1 QLE3044 Port Assignments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

4-2 QLE3044 Status LEDs — Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

4-3 QLE3044 Bracket Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

4-4 QLE3044 Bracket Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

4-5 QLE3142 Installation and Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

4-6 QLE3142 Status LEDs — Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

4-7 QLE3142 Bracket Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

4-8 QLE3142 Bracket Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

5-1 Found New Hardware Wizard Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

5-2 Driver Location Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

5-3 Select Driver Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

5-4 Browse for Folder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

5-5 Software Installation Progress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

5-6 Software Installation Complete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

5-7 Driver Installation Verification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

5-8 Adapter Properties — General Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

5-9 Adapter Properties — Advanced Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

5-10 Adapter Properties — Information Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15

5-11 Adapter Properties — Diagnostics Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16

5-12 Adapter Properties — Statistics Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17

5-13 Adapter Properties — Flash Update Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18

5-14 Adapter Properties — Driver Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19

5-15 Adapter Properties — Resources Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20

5-16 Network Connections Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21

5-17 Local Area Connection Properties Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22

5-18 Internet Protocol (TCP/IP) Properties Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23

5-19 Adapter Properties — Diagnostics Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25

5-20 Run Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26

5-21 Location of ntttcp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27

5-22 Run Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30

5-23 Registry Editor — HKEY_LOCAL_MACHINE Directory . . . . . . . . . . . . . . . . . . . . . 5-30

5-24 Registry Editor — Parameter Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31

viii NE0154601-00 A

QLogic 3000 and 3100 Series Intelligent Ethernet Adapters Users Guide

Version 4.6

5-25 New Key — DWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32

5-26 Creating Tcp1323Opts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32

5-27 Edit DWORD Value Window — Tcp1323Opts Parameter . . . . . . . . . . . . . . . . . . . 5-32

5-28 Modifying the TcpWindowSize Parameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-33

5-29 Edit DWORD Value Window — TcpWindowSize Parameter. . . . . . . . . . . . . . . . . 5-33

List of Tables

Table Page

1-1 QLogic 3000 and 3100 Series Intelligent Ethernet Adapters . . . . . . . . . . . . . . . . . 1-2

2-1 Cable Specifications — Optical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

2-2 Cable Specifications — Copper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

4-1 Mapping of Port Number, PCI Function, and Ethernet Interface . . . . . . . . . . . . . . . 4-2

4-2 QLE3044 LED Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

5-1 Advanced Properties Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

5-2 ntttcps and ntttcpr Command Line Options . . . . . . . . . . . . . . . . . . . . . . . . . . 5-28

5-3 Tcp1323Opts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-29

5-4 Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-29

6-1 modprobe Command Optional Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

7-1 Bonding Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6

9-1 Troubleshooting Tools in Windows Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2

9-2 Troubleshooting Tools in Linux. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3

9-3 QLogic Adapter Device IDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5

A-1 Diagnostic Utility Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

C-1 Flash Utility Commands — Windows Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-4

C-2 Flash Utility Commands — Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-8

NE0154601-00 A ix

Preface

Intended Audience

This guide is for system administrators and end-users of the QLogic 3000 and

3100 Series Intelligent Ethernet adapters.

Related Materials

 Release Notes included in the software release.

 Linux

man page % man nx_nic

 nxudiag utility help (diagnostics)

 nxudiag -h or nxudiag --help (Windows

)

 % ./nxudiag -h or nxudiag --help (Linux)

 Check the QLogic Web site for updates.

Documentation Conventions

This guide uses the following documentation conventions:

 NOTE: provides additional information.

 Te xt i n blue font indicates a hyperlink (jump) to a figure, table, or section in

this guide, and links to Web sites are shown in underlined blue

. For

example:

 Table 9-2 lists problems related to the installation.

 See “Installation Checklist” on page 3-6.

 For more information, visit www.qlogic.com

 Te xt i n bold font indicates user interface elements such as a menu items,

buttons, check boxes, or column headings. For example:

 Click Start, point to Programs, point to Accessories, and then click

Command Prompt.

 The Adapter Properties window opens with the General tab in front.

Preface

Technical Support

x NE0154601-00 A

 Te xt i n Courier font indicates a file name, directory path, command, or

screen text. For example:

 nx3fwct.bin

 C:\WINDOWS\system32\drivers

 Te xt i n Bold Courier font indicates a command to enter that performs a

specific task. For example:

 rpm -iv nx_nic-[version].src.rpm

The italic text (version) indicates a variable.

 A percent sign (%) is the cursor prompt when executing Linux commands.

 The term <current release> refers to the current release of the software. For

example, release 4.0.305. Check the Release Notes for the most up-to-date

release version.

 Key names and key strokes are indicated with UPPERCASE:

 Press CTRL+P.

 Press the UP ARROW key.

 Te xt i n italics indicates terms, emphasis, variables, or document titles. For

example:

 For a complete listing of license agreements, refer to the QLogic

Software End User License Agreement.

 What are shortcut keys?

 /lib/modules/<kernel-version>/kernel/net/netxen

Technical Support

Customers should contact their authorized maintenance provider for technical

support of their QLogic products. QLogic-direct customers may contact QLogic

Technical Support; others will be redirected to their authorized maintenance

provider.

Visit the QLogic support Web site listed in Contact Information for the latest

firmware and software updates.

Availability

QLogic Technical Support for products under warranty is available during local

standard working hours excluding QLogic Observed Holidays.

Preface

Technical Support

NE0154601-00 A xi

Training

QLogic offers training for technical professionals for all iSCSI, InfiniBand, Fibre

Channel, and Intelligent Ethernet products. From the main QLogic Web page at

www.qlogic.com

, click the Education and Resources tab at the top, then click

the Education & Training tab on the left. The QLogic Global Training Portal offers

online courses, certification exams, and scheduling of in-person training.

Technical Certification courses include installation, maintenance and

troubleshooting QLogic SAN products. Upon demonstrating knowledge using live

equipment, QLogic awards a certificate identifying the student as a Certified

Professional. The training professionals at QLogic may be reached by e-mail at

[email protected].

Contact Information

Please feel free to contact your QLogic approved reseller or QLogic Technical

Support at any phase of integration for assistance. QLogic Technical Support can

be reached by the following methods:

The QLogic knowledge database contains troubleshooting information for the

QLogic adapters. Access the data base from the QLogic Support Web page,

http://support.qlogic.com

. Use the Support Center search engine to look for

specific troubleshooting information.

Web http://support.qlogic.com

Email support@qlogic.com

Preface

Technical Support

xii NE0154601-00 A

Notes

NE0154601-00 A 1-1

1 Overview

This guide describes the system requirements, installation, and setup required for

the QLogic 3000 and 3100 Series Intelligent Ethernet adapters listed in Table 1-1.

This guide should be used in conjunction with the Release Notes.

Obtaining the Latest Software Release

Information

Refer to the Release Notes for more information on the software release package

contents.

The Release Notes document contains:

 Software release package contents

 Current driver and firmware release version

 Known issues

 Additional system software requirements

To download the latest version of the drivers and Release Notes for this product,

refer to the QLogic Web site Downloads section:

http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/default.aspx

1–Overview

Supported QLogic 3000 and 3100 Series Intelligent Ethernet Adapters

1-2 NE0154601-00 A

Supported QLogic 3000 and 3100 Series

Intelligent Ethernet Adapters

The products in Table 1-1 are supported in this document.

These products are collectively referred to as the QLogic adapter unless

otherwise noted.

The QLogic adapters are compatible with Windows

, Linux

, and other Operating

Systems (OSes). For more information about supported operating systems, see

the Release Notes.

Application Notes

For information about Linux PXE and iSCSI boot, see the following applications

notes:

 Setting up Linux PXE on Server and Client Systems, part

number FE0051401-00

 iSCSI Boot Setup, part number IS0051404-00

Table 1-1. QLogic 3000 and 3100 Series Intelligent Ethernet Adapters

Product Product Definition

Transfer

Medium

QLE3044 Quad-port 1GbE Intelligent Ethernet Adapter Copper

QLE3142-CU Dual-port 10GbE Intelligent Ethernet Adapter Twinax

QLE3142-SR Dual-port 10GbE Intelligent Ethernet Adapter (short

range fiber)

Optical

QLE3142-LR Dual-port 10GbE Intelligent Ethernet Adapter (long

range fiber)

Optical

Table Notes

For OEM-branded QLogic 3000 and 3100 Series Intelligent Ethernet adapters, see the QLogic Web

site.

NE0154601-00 A 2-1

2 System Requirements

Before installing the QLogic adapter, make sure your system meets the

requirements listed in this section:

 “Hardware Requirements” on page 2-1

 “System and Software Requirements” on page 2-2

 “Supported QLogic Adapters” on page 2-2

Hardware Requirements

Cable Specifications

Make sure the cables you are using meet the specifications listed in Tables 2-1

and 2-2.

Table 2-1. Cable Specifications — Optical

Product

Core

Diameter

(μm)

Optical

Mode

Wavelength

(nm)

Bandwidth

(MHz)

Distance

(m)

QLE3142-SR 50 OM2 850 400 66

500 82

OM3 2000 300

62.5 OM1 160 26

200 33

QLE3142-LR 9 n/a 1310 N/A 10,000

10 n/a N/A 10,000

2–System Requirements

System and Software Requirements

2-2 NE0154601-00 A

SFP+ Optical Module Requirements

Use only the optical modules validated and shipped with the QLogic adapter.

System and Software Requirements

See the Release Notes for more information on the particular system and software

requirements for the current software release. The drivers and Release Notes are

on the QLogic Web site at:

to://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/default.aspx

Supported QLogic Adapters

Make sure you have one of the adapters listed in Table 1-1.

Table 2-2. Cable Specifications — Copper

Product Cable Type

Network

Type

Cable Length

(meters)

QLE3044-RJ Cat5 LAN 100

QLE3142-CU Copper direct attach twinax LAN 10

NE0154601-00 A 3-1

3 Installation Instructions

This section provides instructions for advanced users who are already familiar

with hardware and software installation procedures. See the appropriate section,

as applicable:

 “QLogic Adapter Installation and Verification” on page 3-1

 “Windows Server Driver Installation” on page 3-2

 “Linux Driver Installation” on page 3-4

QLogic Adapter Installation and Verification

The following sections provide high-level instructions for installing the QLogic

adapter. For more detailed instructions, see “Hardware Installation” on page 4-1.

Pre-installation Checklist

Before installing the QLogic adapter:

1. Verify that the system meets the requirements specified in “System

Requirements” on page 2-1 and in the Release Notes.

2. Power down the system.

QLogic Adapter Installation

To install the QLogic adapter:

1. Insert the QLogic adapter into an available PCI Express

slot.

2. Connect the appropriate cables to the QLogic adapter.

3. Power up the system.

Verify the QLogic Adapter Installation

To verify that the QLogic adapter has been installed correctly, perform the steps in

the appropriate section.

Linux

On Linux systems, execute the following command:

# lspci -vvv -d 4040:

3–Installation Instructions

Windows Server Driver Installation

3-2 NE0154601-00 A

Windows Server

On Windows Server systems, perform the following steps:

1. Open the Start menu.

2. Highlight My Computer, then right-click the mouse button. On the shortcut

menu, select Manage. The Computer Management window opens.

3. Select Device Manager under Computer Management.

4. Check under Other devices for an Unknown Device. The QLogic adapter

will be listed as an Unknown Device. It will have a yellow question mark next

to it prior to having the QLogic adapter driver installed.

5. Right-click the device and select Properties from the shortcut menu.

6. Click the Details tab. Look for VEN_4040 as part of the string. This text

indicates that the QLogic adapter is installed correctly.

Windows Server Driver Installation

Before installing the driver, download the driver package and the Release Notes

from the QLogic Web site, www.qlogic.com

See “Windows Server Driver Checklist” on page 5-1 for more information.

Windows Server 2003

To install the QLogic adapter driver:

1. Open the Start menu.

2. Highlight My Computer, then right-click the mouse button. On the shortcut

menu, select Manage. The Computer Management window opens.

3. Select Device Manager under Computer Management.

4. Select scan for new hardware changes.

5. When prompted to connect to Windows Update, Click No, not at this time,

and then click Next.

6. In the next window, click Install from a list of specific location, then click

Next.

7. Select Search for the best driver in these locations. Deselect the Search

removable media option. Select Include this location in the search.

8. Click Browse, then provide the path to the directory where the driver is

located. The file name is either nxnd5x86.sys (Windows Server 2003,

32 bit) or nxnd5x64.sys (Windows Server 2003, 64 bit)

3–Installation Instructions

Windows Server Driver Installation

NE0154601-00 A 3-3

9. Locate the following files in the driver directory:

nx3fwct.bin

nx3fwmn.bin

nxnd5x86.sys (Windows 2003, 32 bit) or

nxnd5x64.sys (Windows 2003, 64 bit)

Click OK in the Browse for Folder window.

10. Click the Next button from the Hardware Update Wizard window.

To configure the QLogic adapter:

1. On the Start menu, select Control Panel.

2. Select Network Connections.

3. Verify that Ethernet adapter icon says Connected.

4. Assign an IP address to the network interface.

Windows Server 2008

To install the QLogic adapter driver:

1. Open the Start menu.

2. Highlight My Computer, then right-click the mouse button. On the shortcut

menu, select Manage. The Computer Management window opens.

3. Select Device Manager under Computer Management.

4. From the Device Manager window, select scan for new hardware. The

Update Driver Software window opens.

5. Select Browse my computer for driver software, then click Browse.

6. Locate the following files in the driver directory:

nx3fwct.bin

nx3fwmn.bin

nxnd6x86.sys (Windows Server 2008, 32 bit) or

nxnd6x64.sys (Windows Server 2008, 64 bit)

Click OK in the Browse for Folder window.

7. From the Update Driver Software window, click Next.

To configure the QLogic adapter:

1. On the Start menu, select Control Panel.

2. Select Network Connections.

3. Verify that Ethernet adapter icon says Connected.

4. Assign an IP address to the network interface.

3–Installation Instructions

Linux Driver Installation

3-4 NE0154601-00 A

Linux Driver Installation

Before installing the driver, download the driver package and the Release Notes

from the QLogic Web site, www.qlogic.com

See “Linux Driver Checklist” on page 6-1 for more information.

Verify and Remove Existing QLogic Adapter Driver and Tools

Package

If you have a previous version of the QLogic adapter driver, perform the following

steps to remove the driver and tools package:

1. Type:

rpm -qa | grep nx_

2. Type:

ifconfig eth[n] down

3. Type:

rmmod nx_nic.ko

4. Type:

rpm -e nx_nic-[version]

5. Type:

rpm -e nx_tools-[version]

Install the Driver (RPM)

Red Hat

To install the driver on a Red Hat system:

1. Type the following command to install the RPM source:

rpm -iv nx_nic-[version].src.rpm

2. Type the following command to build the binary RPM:

rpmbuild -bb /usr/src/redhat/SPECS/nx_nic-[version].spec

3. Type the following command to install the binary RPM:

rpm -ivh /usr/src/redhat/RPMS/[arch]/nx_nic-[version].[arch].rpm

The [arch] variable designates the system architecture. Some [arch]

variables are i386, i586, i686, x86_64, depending on the system.

Page is loading ...

Qlogic 3000 User manual

Brand: Qlogic

Model: 3000

Category: Networking

Type: User manual

This manual is also suitable for

Download PDF

report

Qlogic 3000 User manual

This manual is also suitable for

Qlogic 3000 User manual

Related papers

Other documents