Tyco Electronics E610216 User manual

Caution:

The touch computer must be unplugged before any installation occurs.

Revision A

P/N E610216

Installing the Magnetic Strip Reader for the

B-Series Touchcomputer

Included Items:

• One Elo Magnetic Strip Reader

• Two mounting screws

Insert the hooks on the device

into the corresponding slots on

the touch computer.

Secure the device to the touch-

computer using the included

screws.

Turn off the touch computer.

To remove each cover, locate

the two small notches on the

cover.

Choose a location to attach the

magnetic stripe reader.

Press a small screwdriver into the

cover between the two notches.

As the cover bends up, grasp the

end and peel it away.

Remove the two accessory

covers over the chosen

mounting location.

Plug the cable into

the connector on the

touchcomputer.