2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Circuit protection
  5. Surge protectors
  6. Tyco Electronics
  7. E610216

Tyco Electronics E610216 User manual

  • Hello! I am an AI chatbot trained to assist you with the Tyco Electronics E610216 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Caution:
The touch computer must be unplugged before any installation occurs.
Revision A
P/N E610216
Installing the Magnetic Strip Reader for the
B-Series Touchcomputer
Included Items:
• One Elo Magnetic Strip Reader
• Two mounting screws
8
7
Insert the hooks on the device
into the corresponding slots on
the touch computer.
Secure the device to the touch-
computer using the included
screws.
Turn off the touch computer.
To remove each cover, locate
the two small notches on the
cover.
Choose a location to attach the
magnetic stripe reader.
Press a small screwdriver into the
cover between the two notches.
As the cover bends up, grasp the
end and peel it away.
Remove the two accessory
covers over the chosen
mounting location.
Plug the cable into
the connector on the
touchcomputer.
2
5
1
4
3
6
7
8
/