JVC LYT1829-001D User manual

HARD DISK CAMCORDER

VIDEOCÁMARA CON DISCO DURO

Dear Customer

Thank you for purchasing this hard

disk camera. Before use, please read

the safety information and precautions

contained in pages 2 and 3 to ensure

safe use of this product.

For Future Reference:

Enter the Model No. (located on the

bottom of the camera) and Serial No.

(located on the battery pack mount of

the camera) below.

Model No.

Serial No.

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

GZ-MG365

GZ-MG335

GZ-MG330

U

Apreciado cliente

Muchas gracias por haber adquirido

esta cámara con disco duro integrado.

Antes de usarla, lea la información de

seguridad y las precauciones contenidas

en las páginas 2 y 3 para garantizar un

uso seguro de este producto.

Para futuras consultas:

Escriba a continuación el número

de modelo (situado en la base de la

cámara) y el número de serie (situado

en el compartimiento de la batería de

la cámara).

Número de modelo

Número de serie

ENGLISH ESPAÑOL

SPEN

2

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage" within the

product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR

SHOCK HAZARD, DO NOT EXPOSE THIS

UNIT TO RAIN OR MOISTURE.

NOTES:

•

The rating plate and safety caution are on the

bottom and/or the back of the main unit.

•

The serial number plate is on the battery pack

mount.

•

The rating information and safety caution of the

AC adapter are on its upper and lower sides.

Caution on Replaceable lithium battery

The battery used in this device may present a ﬁ re

or chemical burn hazard if mistreated.

Do not recharge, disassemble, heat above 100°C

or incinerate.

Replace battery with Panasonic (Matsushita

Electric), Sanyo, Sony or Maxell CR2025.

Danger of explosion or Risk of ﬁ re if the battery is

incorrectly replaced.

•

Dispose of used battery promptly.

•

Keep away from children.

•

Do not disassemble and do not dispose of in

ﬁ re.

For USA-California Only

This product contains a CR Coin Cell Lithium

Battery which contains Perchlorate Material

– special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

When the equipment is installed in a cabinet or on

a shelf, make sure that it has sufﬁ cient space on

all sides to allow for ventilation (10 cm (3-15/16

")

or more on both sides, on top and at the rear).

Do not block the ventilation holes.

(If the ventilation holes are blocked by a

newspaper, or cloth etc. the heat may not be able

to get out.)

No naked ﬂ ame sources, such as lighted candles,

should be placed on the apparatus.

When discarding batteries, environmental

problems must be considered and the local rules

or laws governing the disposal of these batteries

must be followed strictly.

The apparatus shall not be exposed to dripping

or splashing.

Do not use this equipment in a bathroom or

places with water.

Also do not place any containers ﬁ lled with water

or liquids (such as cosmetics or medicines, ﬂ ower

vases, potted plants, cups etc.) on top of this unit.

(If water or liquid is allowed to enter this

equipment, ﬁ re or electric shock may be caused.)

Do not point the lens directly into the sun. This

can cause eye injuries, as well as lead to the

malfunctioning of internal circuitry. There is also a

risk of ﬁ re or electric shock.

CAUTION!

The following notes concern possible physical

damage to the camera and to the user.

Carrying or holding the camera by the LCD monitor

can result in dropping the unit, or in a malfunction.

Do not use a tripod on unsteady or unlevel surfaces.

It could tip over, causing serious damage to the

camera.

CAUTION!

Connecting cables (Audio/Video, S-Video, etc.)

to the camera and leaving it on top of the TV is

not recommended, as tripping on the cables will

cause the camera to fall, resulting in damage.

CAUTION:

The mains plug shall remain readily operable.

WARNING:

The battery pack, the camera with battery

installed, and the remote control with battery

installed should not be exposed to excessive heat

such as direct sunlight, ﬁ re or the Iike.

3

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including ampliﬁ ers) that produce

heat.

9. Only use attachments/accessories speciﬁ ed by

the manufacturer.

10. Use only with the cart,

stand, tripod, bracket,

or table speciﬁ ed by

the manufacturer,

or sold with the

apparatus. When a cart

is used, use caution

when moving the

cart/apparatus combination to avoid injury from

tip-over.

11. Unplug this apparatus during lightning storms

or when unused for long periods of time.

12. Refer all servicing to qualiﬁ ed service

personnel. Servicing is required when the

apparatus has been damaged in any way, such

as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

Remember that this camera is intended for

private consumer use only.

Any commercial use without proper permission

is prohibited. (Even if you record an event such

as a show, performance or exhibition for personal

enjoyment, it is strongly recommended that you

obtain permission beforehand.)

Trademarks

•

Manufactured under license from Dolby

Laboratories. Dolby and double-D symbol are

trademarks of Dolby Laboratories.

•

Windows

®

is either registered trademark or

trademark of Microsoft Corporation in the United

States and/or other countries.

•

Macintosh is a registered trademark of Apple

Inc.

•

Other product and company names included

in this instruction manual are trademarks

and/or registered trademarks of their respective

holders.

If this symbol is shown, it is only

valid in the European Union.

4

Easy Start Guide

Preparation

1

Attach the battery

pack

Charge the Battery Pack.

( pg. 14)

Open the lens

cover

Open the LCD monitor

The camera turns on

automatically.

Video recording

2

Select (video) mode Select recording (REC) mode

BATT.

PLAY/REC

SELECT

[5h56m]

PLAY/REC

SELECT

Playing back

3

Select (video) mode Select playback (PLAY) mode

to display thumbnails on the

screen

5

ENGLISH

Press the START/STOP button to start recording

Select the desired ﬁ le using the touch sensor. And then

touch the OK button to start playback

•

To stop playback

Select

.

CAUTION: Touch the sensors with your ﬁ nger. The sensors do not function if you touch

them with your ﬁ nger nail or with gloves on.

When [SET DATE/TIME!] appears,

select [YES] within 10 seconds.

Set the date and time

( pg. 14)

SET DATE/TIME!

YES

NO

DATE TIME

JAN 31

11

AM

07

2007

( pg. 6)

6

NOTE

The cursor moves from 1 to 9 on the index

screen when you slide your ﬁ nger on the

touch sensor.

1 2

3

4 5

6

7 8

9

12

3

45

6

78

9

CAUTION

Touch the sensors with your ﬁ nger. The

sensors do not function if you touch them with

your ﬁ nger nail or with gloves on.

How to Select an Item Using the

Touch Sensor

An example screen in English is used for the

guidance below.

Selecting an item from the menu list

(on the menu screen)

MENU

IMAGE SIZE

GAIN UP

IMAGE QUALITY

BASIC SETTINGS

Slide your ﬁ nger up and down on the

sensor.

Touch the OK button.

Using on-screen buttons

(e.g. during playback  pg. 18)

A

B

A

To select an on-screen button appearing

on the left side, touch the portion of the

sensor next to the on-screen button.

B

To select an on-screen button appearing at

the bottom of the screen, touch the touch

sensor under the on-screen button you

want to select.

7

ENGLISH

Make a backup of important recorded data

JVC will not be responsible for any lost data. It is recommended to copy your important

recorded data to a DVD or other recording media for storage. ( pg. 22)

Make a trial recording

Before the actual recording of important data, make a trial recording and play back the

recorded data to check that the video and sound have been recorded correctly.

Reset the camera if it does not operate correctly

This camera uses a microcomputer. Factors such as background noise and interference

can prevent it from operating correctly. If the camera does not operate correctly, reset the

camera. ( pg. 33)

Precautions on handling batteries

•

Be sure to use the JVC BN-VF808U/VF815U/VF823U battery packs.

•

If the camera is subjected to electrostatic discharge, turn the power off before using it

again.

If a malfunction occurs, stop using the camera immediately

and consult your local JVC dealer

•

If a problem occurs when using the microSD card, take the card together with the

camera for repair. If one of them is not included, the cause of the malfunction cannot be

diagnosed, and the camera cannot be repaired.

•

Recorded data may be erased while the camera is being repaired or inspected. Back up

all data before requesting repairs or inspections.

Because the camera may be used for demonstration in a shop,

the demonstration mode is set to [ON] by default

To deactivate the demonstration mode, set [DEMO MODE] to [OFF] from the MENU.

When connecting the camera to other devices using an

optional DV cable, make sure to follow the procedure below.

Connecting the cable incorrectly may cause malfunctions to

the camera and/or other devices.*

•

Connect the DV cable ﬁ rst to the device, and then to the camera.

•

Connect the DV cable (plugs) correctly according to the shape of the DV connector.

* This does not apply to the GZ-MG330 model.

8

Contents

GETTING STARTED

Accessories ............................................ 9

How to Use the Everio Dock ..........................9

Index ...................................................... 10

Indications on LCD Monitor ................. 12

Necessary Settings before Use ........... 14

Charging the Battery Pack ...........................14

Date/Time Setting ........................................14

Other Settings ....................................... 15

Attaching the Shoulder Strap .......................15

Checking the Remaining Battery Power ...... 15

Preparing the Remote Control .....................15

RECORDING

Recording Files ..................................... 16

Video Recording ..........................................16

Still Image Recording .................................. 17

Playing Back Files ................................ 18

Video/Still Image Playback ..........................18

Watching Images on TV........................ 19

EDITING/COPYING

Managing Files ...................................... 20

Deleting/Protecting Files ..............................20

Copying Files ........................................ 22

Using a DVD Burner to Copy Files from the

Camera ......................................................22

PC OPERATION

File Backup on a Windows

®

PC ........... 23

System Requirements .................................23

Software Installation ....................................24

Connecting the Camera to the PC ...............25

File Backup on the PC .................................26

File Backup on the PC without Using

Software .....................................................27

Other Windows

®

PC Operations .......... 28

Getting More Use of the Software ...............28

Folder Structure and Extensions ........ 29

File Backup on a Macintosh

®

.............. 30

System Requirements .................................30

Connecting the Camera to the Macintosh ...30

File Backup on the Macintosh ..................... 31

Customer Support Information ........... 32

FURTHER INFORMATION

Troubleshooting .................................... 33

Cleaning ................................................ 34

Warning Indications ............................. 35

Speciﬁ cations ....................................... 36

Cautions ................................................ 38

Terms ..................................................... 40

Read these INSTRUCTIONS to enjoy your CAMCORDER.

For more details on the operations, refer to the GUIDEBOOK in the

supplied CD-ROM.

In order to view the GUIDEBOOK, Adobe

®

Acrobat

®

Reader

TM

or Adobe

®

Reader

®

must be installed.

Adobe

®

Reader

®

can be loaded from Adobe’s web site:

http://www.adobe.com/

NOTE

Select your desired language with a single click.

The model name is indicated on the bottom of your camcorder.

9

ENGLISH

GETTING STARTED

Attaching the Core Filter to the USB Cable

Connect the end of the cable with the core ﬁ lter to the camera.

Accessories

Everio Dock*

CU-VC4U ( below)

AC Adapter

AP-V18U/14U

Battery Pack

BN-VF808U

Audio/Video Cable

USB Cable

( pg. 22, 25 and 30)

Shoulder Strap

( pg. 15)

CD-ROM

( pg. 24, 28)

Remote Control Unit

RM-V751U ( pg. 15)

NOTE

Make sure to use the provided cables for

connections. Do not use any other cables.

Lithium Battery

CR2025

Pre-installed in the

remote control unit.

Core Filter

How to Use the Everio Dock*

You can connect cables to the connectors of the Everio dock. The connection is completed when

you place the camera on the dock.

NOTE

For the connection using the S-Video jack and DV jack, an optional S-Video cable and DV cable are needed.

Consult the JVC Service Center described on the sheet included in the package for details on its availability.

Make sure to connect the end with a core ﬁ lter to the camera. The core ﬁ lter reduces interference.

•

The S-Video cable (optional) enables even higher playback quality on TV. ( pg. 19)

* GZ-MG330 model does not include the Everio dock.

Camera Connection Terminal

S-Video Jack

AV Jack

DC Jack

DV Jack

USB Jack

Release the stopper.

3 cm (1-3/16")

Wind once.

10

Index

NOTES

•

The LCD monitor can rotate 270°.

•

Power-linked operation

You can also turn the camera on/off by

opening/closing the LCD monitor during the

recording mode.

•

Be careful not to cover , , and

during shooting.

11

ENGLISH

Camera

Touch Sensor ( pg. 6)

OK (DISP) Button [OK/DISP] ( pg. 13)

Menu Button [MENU]

Power Switch [POWER]

(You can turn off the camera by pressing

and holding this button.)

Speaker

Playback/Recording Mode Switching

Button [SELECT PLAY/REC] ( pg. 16)

Access/Charge Lamp [ACCESS/CHARGE]

(Blinks when you access ﬁ les or charge

the battery. Do not turn off the power or

remove the battery pack/AC adapter while

accessing ﬁ les.)

Direct DVD Button [DIRECT DVD]

( pg. 22)/Title Button [TITLE]

Direct Backup Button [DIRECT BACK

UP] ( pg. 26)/Information Button [INFO]

( pg. 15)

Auto/Manual Mode Button [AUTO/

MANUAL]

Video Recording Start/Stop Button [START/

STOP] ( pg. 16)

Still Image Shooting Button [SNAPSHOT]

( pg. 17)

Zoom Lever [W

, T ]

Speaker Volume Control [–VOL+]

( pg. 18)

Mode Switch [

, ]

DC Jack [DC] ( pg. 14)

Audio/Video Jack [AV]

USB (Universal Serial Bus) Jack [

]

( pg. 22, 25 and 30)

LED Light

Camera Sensor

Remote Sensor ( pg. 15)

Lens Cover

Lens

Lens Cover Switch [

, ]

Stereo Microphone

microSD Card Slot

Stud Hole

Tripod Mounting Socket

Battery Release Button [BATT.] ( pg. 14)

Battery Pack Mount ( pg. 14)

Grip Strap

Remote Control

Infrared Beam Transmitting Window

ZOOM (T/W) Buttons

Zoom In/Out

Up Button

Rotate Button (counterclockwise)

( pg. 18)

Skip Backward Button

Left Button

Back Button

PLAYLIST Button

START/STOP Button

SNAPSHOT Button ( pg. 17)

INFO Button ( pg. 15)

Skip Forward Button

PLAY/PAUSE Button

Right Button

Next Button

Down Button

Rotate Button (clockwise) ( pg. 18)

INDEX Button

DISP Button

12

During both Video and Still Image

Recording

JAN. 20. 2007

4:55PM

1/250

Selected Operation Mode Indicator

: Auto Mode

: Manual Mode

Effect Mode Indicator

Tele Macro Mode Indicator

LED Light Indicator

Program AE Mode Indicator

AV/S-Video Input Jack Indicator*

Zoom Indicator

Selected Medium Indicator

Drop Detection Indicator (Appears when

[DROP DETECTION] is set to [OFF].)

Approximate Zoom Ratio

White Balance Indicator

Manual Focus Adjustment Indicator

Battery Indicator ( pg. 35)

Date/Time ( pg. 14)

Brightness Control Indicator

Backlight Compensation Indicator

Iris Lock Indicator

± : Exposure Adjustment Indicator

: Metering Area Control Indicator

Shutter Speed

* This does not apply to the GZ-MG330 model.

Indications on LCD Monitor

During Video Recording Only

0:04:01

[5h56m]

Mode Indicator

Counter

Picture Quality:

(ULTRA FINE),

(FINE), (NORMAL), (ECONOMY)

Remaining Time ( pg. 16, 37)

REC: (Appears during recording.)

( pg. 16)

: (Appears during record-standby

mode.)

Digital Image Stabilizer (DIS) Indicator

(Appears when [DIS] is set to [OFF].)

Wind Cut Indicator

Event Indicator

During Still Image Recording Only

PHOTO

[9999]

FINE

10

640

Mode Indicator

Focus Indicator

Image Size

Picture Quality: FINE (ﬁ ne) or STD

(standard)

Remaining Number of Shots ( pg. 37)

Shooting Indicator ( pg. 17)

Shutter Mode Indicator

Self-Timer Recording Indicator

13

ENGLISH

During Video Playback

X-60

9:55:01

JAN. 20. 2007

4:55PM

Mode Indicator ( pg. 18)

Effect Mode Indicator

Wipe/Fader Effect Indicator

: Playlist Playback Indicator (Appears

when playing back a playlist.)

: Event Search Playback Indicator

(Appears when playing back a video ﬁ le

from the event search.)

: Date Search Playback Indicator

(Appears when playing back a video ﬁ le

from the date search.)

Picture Quality:

(ULTRA FINE),

(FINE), (NORMAL), (ECONOMY)

Counter

Playback Mode ( pg. 18)

:Playback

:Pause

:Forward Search

:Reverse Search

:Forward Slow-Motion

:Reverse Slow-Motion

(The number on the left shows speed.)

Selected Medium Indicator

Drop Detection Indicator (Appears when

[DROP DETECTION] is set to [OFF].)

Volume Level Indicator

Battery Indicator ( pg. 35)

Date/Time ( pg. 14)

During Still Image Playback

101-0098

JAN. 20. 2007

4:55PM

Mode Indicator ( pg. 18)

Effect Mode Indicator

Folder/File Number

Slide Show Playback Indicator ( pg. 18)

Selected Medium Indicator

Drop Detection Indicator (Appears when

[DROP DETECTION] is set to [OFF].)

Battery Indicator ( pg. 35)

Date/Time ( pg. 14)

Switching indication modes on LCD

monitor

Each time you touch the DISP button,

indications on LCD monitor switch as

shown below;

In recording mode:

All indications/Indications for selected

functions

In playback mode:

All indications/Only date and time/

No indications

On-screen function guide

The on-screen function guide is displayed

at the bottom of the screen during menu

display, etc.

EFFECT

WIPE/FADER

BASIC SETTINGS

MONITOR OFF

ADD EFFECT TO IMAGE

14

Necessary Settings before Use

Charging the Battery Pack

1

Close the LCD monitor to turn off the

camera.

2

Attach the battery pack.

Slide the battery pack down until it locks

in place.

Bottom of the Camera

BATT.

3

Connect the AC adapter.

•

You can also connect the AC adapter using

the Everio dock connector.* ( pg. 9)

* GZ-MG330 model does not include the

Everio dock.

•

The charge lamp blinks to indicate charging

has started.

•

When the lamp goes out, charging is

ﬁ nished. Unplug the AC adapter from the

AC outlet and disconnect the AC adapter

from the camera.

To detach the battery pack

Slide and hold BATT. ( step 2), then

remove the battery pack.

To check the remaining battery power

See page 15.

NOTES

•

You can also use the camera with just the

AC adapter.

•

Please do not pull or bend the AC adapter

plug and cable. This may damage the AC

adapter.

Date/Time Setting

1

Open the LCD monitor to turn on the

camera.

2

When [SET DATE/TIME!] appears,

select [YES] within 10 seconds.

SET DATE/TIME!

YES

NO

If you do not select within 10 seconds, the

screen disappears. In such case, press

and hold the POWER button and turn the

camera on again.

3

Set the date and time.

DATE TIME

JAN 31

11

AM

07

2007

Repeat this step to input the month, day,

year, hour and minute.

4

Touch the OK button to ﬁ nish.

To change the date and time

1) Touch the MENU button.

2) Select [BASIC SETTINGS], and then

[CLOCK ADJUST].

3) Set the date and time.

To return to the previous screen

Select

.

To quit the screen

Touch the MENU button.

DC Jack

AC Adapter

To AC Outlet

(110V to 240V)

15

ENGLISH

Checking the Remaining Battery

Power

Preparation:

•

Attach the battery pack.

•

Press the SELECT PLAY/REC button to

select recording mode.

For mode:

Press the INFO button twice or the INFO

button and then select

.

For

mode:

Press the INFO button.

DIRECT

BACK UP

INFO

BATTERY CONDITION

MAX TIME

min

QUIT

To return to the normal screen

Press the INFO button again.

NOTES

•

If “COMMUNICATING ERROR” appears,

there may be a problem with your battery.

In such a case, consult your nearest JVC

dealer.

•

The recordable time display should only be

used as a guide. It is displayed in 10 minute

units.

Preparing the Remote Control

A battery is included inside the remote control at

the time of purchase.

Remove the insulation sheet before use.

Beam Effective Area

NOTE

The transmitted beam may not be effective or may

cause incorrect operation when the remote sensor

is directly exposed to sunlight or powerful lighting.

To Reinsert the Battery

Pull out the battery holder by pressing the lock

tab.

Lock Tab

Lithium Battery

(CR2025)

Effective distance:

5 m (16 ft)

Remote Sensor

Other Settings

Attaching the Shoulder Strap

Eyelet

Strap Guide

Buckle

16

Recording Files

Video Recording

Preparation: Open the LCD monitor to turn on the camera.

Press the SELECT PLAY/REC

button to select recording mode.

PLAY/REC

SELECT

Press the START/STOP button to

start recording.

REC

[5h56m]

Approximate remaining time for

recording appears.

To stop recording

Press the START/STOP button again.

To view the video you just recorded

Select

during pause.

During the preview, you can delete the

video by selecting

.

To change the picture quality

Change the settings in [VIDEO QUALITY]

from the MENU.

To change the aspect ratio of the image

(16:9/4:3)

Change the settings in [SELECT ASPECT

RATIO] from the MENU.

Slide the mode switch to select

(video) mode.

NOTES

•

Video ﬁ les are given the names MOV001.MOD to MOV009.MOD, MOV00A.MOD to MOV00F.MOD,

and MOV010.MOD in order of recording.

•

After recording video for 12 consecutive hours, recording stops automatically.

•

A new ﬁ le will be created for every 4 GB of continuous shooting.

•

This camera records video in MPEG2 format compliant with SD-VIDEO format. This camera is not

compatible with other digital video formats.

RECORDING

17

ENGLISH

Still Image Recording

Preparation: Open the LCD monitor to turn on the camera.

Slide the mode switch to select

(still image) mode.

Press the SELECT PLAY/REC

button to select recording mode.

PLAY/REC

SELECT

Press and hold the SNAPSHOT

button halfway.

[

FINE

640

The indicator becomes green when

the captured image is focused.

Press the SNAPSHOT button fully

to take the photo/picture.

[9999]

FINE

4

0

To view the image you just recorded

Select

after shooting.

During the preview, you can delete the

image by selecting

.

To change the picture quality

Change the settings in [IMAGE

QUALITY] from the MENU.

To record still images continuously

Set to [CONTINUOUS SHOOTING] in

[SHUTTER MODE] from the MENU.

18

Playing Back Files

Video/Still Image Playback

1

Slide the mode switch to select

(video) or (still image) mode.

2

Press the SELECT PLAY/REC button

to select playback mode.

PLAY/REC

SELECT

The index screen for videos appears.

3

Select the desired ﬁ le.

VIDEO PLAYBACK

To watch on TV

See page 19.

To check the ﬁ le information

Press the INFO button when playback is

paused.

To adjust the sound volume of videos

Turn down the

volume

Turn up the

volume

Operations during Video Playback

: Return to the ﬁ rst scene of the ﬁ le

: Go to the ﬁ rst scene of the next ﬁ le

: Return to the index screen

: Reverse search (during playback)

: Frame-by-frame playback in reverse

direction (during pause)*

: Playback

: Pause

: Forward search (during playback)

: Frame-by-frame playback in forward

direction (during pause)*

* Slow playback starts when you keep

touching the sensor button under

/

for a while.

Operations during Still Image

Playback

: Rotate 90 degrees counterclockwise

: Change playback order of slide show

in reverse direction

: Rotate 90 degrees clockwise

: Change playback order of slide show

in forward direction

: Return to the index screen

: Display the previous ﬁ le

: Start/end the slide show

: Display the next ﬁ le

19

ENGLISH

Watching Images on TV

Preparation:

•

Set [SWITCH TO ANALOG I/O] to [OUTPUT] from the MENU. (Factory-preset = [OUTPUT])*

•

Turn off all units.

* This does not apply to the GZ-MG330 model.

NOTES

•

You can also connect the cables using the Everio dock connectors. The S-Video cable

(optional) enables even higher playback quality. ( pg. 9) When other devices such as a DVD

burner are connected to the Everio dock, turn the power of these devices off.*

•

This camera is designed to be used with NTSC-type color television signals. It cannot be used

with a television of a different standard.

* GZ-MG330 model does not include the Everio dock.

1

Turn on the camera and the TV.

2

Set the TV to its VIDEO mode.

3

(Only when connecting the camera to the VCR/DVD recorder)

Turn on the VCR/DVD recorder, and set it to its AUX input mode.

4

Start playback on the camera. ( pg. 18)

16:9 TV 4:3 TV

If the aspect ratio of the image is not correct as

shown on the right

Change the settings in [SELECT TV TYPE] from

the MENU.

To display the camera’s on-screen display on

TV

Set [DISPLAY ON TV] to [ON] from the MENU.

AV Input Jack

AV Cable

AV Jack

DC Jack

AC Adapter

To AC Outlet

20

Managing Files

EDITING/COPYING

CAUTION

Do not remove the recording medium or

perform any other operation (such as turning

off the power) while accessing ﬁ les. Also,

be sure to use the provided AC adapter, as

the data on the recording medium may be

corrupted if the battery becomes exhausted

during operation. If the data on the recording

medium becomes corrupted, format the

recording medium.

Deleting/ Protecting Files

•

Protected ﬁ les cannot be deleted. To delete

them, release the protection ﬁ rst.

•

Once ﬁ les are deleted, they cannot be

restored. Check ﬁ les before deleting.

Preparation:

•

Slide the mode switch to select or

mode.

•

Press the SELECT PLAY/REC button to

select playback mode.

The following screen illustrations are

examples when performing [DELETE].

1

Touch the MENU button.

You can skip directly to the delete menu by

selecting

.

2

Select [DELETE] or [PROTECT/

CANCEL].

DELETE

PROTECT/CANCEL

PLAYBACK MPG FILE

PLAYBACK PLAYLIST

DELETE RECORDED FILES

Deleting/Protecting the Currently

Displayed File

After performing steps 1-2

3

Select [CURRENT].

QUIT

DELETE

FILE SELECT

DELETE ALL

SELECT FILES ONE BY ONE

CURRENT

4

When [DELETE?] or [PROTECT?]

appears, select [YES].

DELETE?

Remaining files:

NO

YES

You can select the previous or next ﬁ le by

selecting

or .

Deleting/Protecting Files

After performing steps 1-2

3

Select [FILE SELECT].

4

Select the desired ﬁ le.

QUIT

VIDEO DELETE

•

The (deletion) or (protection) mark

appears on the ﬁ le. To select other ﬁ les,

repeat this step.

•

If you slide the zoom lever towards T,

the preview screen is displayed. Sliding

the zoom lever towards W returns to the

index screen.

5

Select [QUIT].

Page is loading ...

JVC LYT1829-001D User manual

This manual is also suitable for

JVC LYT1829-001D User manual

in other languages

Related papers

Other documents