3
ASSEMBLY INSTRUCTIONS
FUNCTIOS
IMPORTANT!Followthoroughlytheinstructionsforuseandassemblystepsgivenintheguresin
this manual.
CAUTION! CHECK IF FIXING IS SECURE AFTER EACH ASSEMBLY STEP! Make sure all pins
show through the respective openings.
Tools needed to complete the assembly:ascrewdriver(notincludedintheset).
Theassemblystepsarenumberedfrom1to12.Usetheirdescriptionsbelowwiththegurecarrying
the same number.
1 – ASSEMBLY OF THE REAR TUBE OF THE SEAT TO THE SIDE BASE TUBES
Note:Pulloutthereartubeoftheseattomakesureitisxed
2 – ASSEMBLY OF THE LOWER END OF THE LEGS TO THE SIDE BASE TUBES
3 – ASSEMBLY OF THE UPPER END OF THE LEGS TO THE SIDE BASE TUBES
IMPORTANT!Eachlegisdesignedtottooneofthesidebases.Ifthefootdoesnottthebasewhen
mounting, you must remove it and mount it on the other base.
Performtheactionsshownintheguretomounttheotherleg.
4 – ASSEMBLY OF MUSIC AND VIBRATION BOX
5 – ASSEMBLY OF THE FRONT SUPPORT TUBE
5-1–InsertthetwoM5x50screwsintothelegopeningsandtighten.
5-2–Insertthetwoendsofthesupportintothecorrespondingholesonbothfeet.
6 – ASSEMBLY OF THE REAR SUPPORT TUBE
InsertthetwoM5x30screwsintotheholesofthesidebasesandtighten,andtheninserttherearsup-
portpipeasshowninthegure.
IMPORTANT!Thebacksupporttubeisdesignedtotonthesidebases.Ifthemountingdoesnottthe
base, you must turn it over and install it again.
7 – PLACING THE FABRIC COVER AND SOFT HEAD SUPPORT
Note: Secure with the fasteners of the upper pocket of the fabric.
8 – POSITIONS OF THE SEAT – UPRIGHT AND RECLINED
9 – ROCKING FUNCTION
Usetherockingfunction,whenthefrontsupporttubeisfoldedtotheseat(1).
Pulloutthefrontsupporttube,toxthebouncer(2).
Note:Makesurethebouncerisxedbypressingtheseatdownwards.
10 – SAFETY HARNESS
Fasten the two seat belts in the buckle.
IMPORTANT!Afteradjustingthelength,thebeltshouldbeastightaspossibletothechild’sbodywith-
out causing any inconvenience.
ATTENTION! The belt should not be twisted, worn out or torn.
11 – TOY BAR
12 – MUSIC AND VIBRATION BOX
Removethecoverofthebatterycompartmentwithascrewdriver.Insert3pcsbatteriestypeАА/1,5V
keeping the polarity. Secure the battery compartment with the cover.
When pressing the button of the music and vibration box, you will activate melody, sounds and vibration.