Classic Bouncer

- with toybar

- Backrest and legrest adjustable

- Swing and feeding position

- 3 point harness

- Weight: 3,6 kg

- EN 12790:2007 tested

Instruction Leaflet carefully before use of the pram and then to keep it in a safe place. If you fail to do this the safety of

Your ABC-Design Team

Hints for Care and Use

Hints for Care and UseHints for Care and Use

Hints for Care and Use

1. The material which are used for manufacturing equals to AZO, EN 71-2 and EN 71-3 none fadeing values. However, we advise you

not to expose the product to the sun for a long time. Attrition and fading of colours during heavy solar radiation do not justify a

damage claim. The fabric case of your bouncer is washable. You can wash the case by hand or machine coldwash.

Page 2

1. Set up the bouncer

1. Set up the bouncer1. Set up the bouncer

1. Set up the bouncer

Put the metal parts into the plastic fixation as shown on

picture.

Put the metal part into the plastic part until it snaps in.

Page 3

2. Function of bouncing and fixing

2. Function of bouncing and fixing2. Function of bouncing and fixing

2. Function of bouncing and fixing

Pull the two blue plastic parts back until it snaps in.

3. Fasten and unfasten the head protection3. Fasten and unfasten the head protection

velcro on the backside of the bouncer, as shown on the

photo.

If you want to remove the head support, you have to remove

the velcro at the backside of the bouncer.

Page 4

4. Adjustment of the leg support

4. Adjustment of the leg support4. Adjustment of the leg support

4. Adjustment of the leg support

To adjust the leg support you have to pull the clip

mechanism up, as shown on the photo. Now you can adjust

the position. To fix it you have to clap the folding

5. Adjusting the backrest

5. Adjusting the backrest5. Adjusting the backrest

5. Adjusting the backrest

To adjust the backrest you have to push the clip mechanism

up on both sides. Now you can adjust the position of the

backrest. To fix it you have to clip the folding mechanism

down.

Page 5

6

66

6. Function of the harness

To fix the harness please put the two plastic parts together until

they lock.

Please adjust the harness that your child will keep in the

scheduled position.

7

77

7. Fixing the play tray

Put both ending parts of the play tray into the fixation at the

bouncer

W

WW

WARNIN

tray while your child is sitting inside

tray while your child is sitting insidetray while your child is sitting inside

tray while your child is sitting inside

88

and pull the frame apart as shown on the photo.

Now pull both sides of the frame into direction to the

backrest as shown on the photo.

Now the bouncer is folded.

Page 7

-

- Damp textile parts, which can’t be dried or mouldy parts, are no reason for reclamation.

ddand this is also no reason for a reclamation.

- WARNING

- This bouncer is suitable for one baby.

- WARNING

- WARNING