2. KOAMTAC
  3. 908590 KDC270 Finger Trigger Glove

KOAMTAC 908590 KDC270 Finger Trigger Glove, KDC270 Finger Trigger Glove User manual

  • Hello! I am an AI chatbot trained to assist you with the KOAMTAC 908590 KDC270 Finger Trigger Glove User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
KDC270 Finger Trigger Glove
Installation Manual
1 KDC Finger Trigger Glove
Installation Instructions
Removal Instructions
J
L
X X
Protective Boot
Charging Cradle
Additional KDC270 Accessories:
*KDC270 sold separately
What’s in the box?
Return adaptor to pocket and close flap for storage.
Slide the KDC270, with adaptor attached, all the
way into the pocket and close flap. (E,F)
Insert KDC270 into pocket and connect adaptor to
bottom of scanner. (C,D)
Open bottom flap and pull adaptor out of pocket
being careful not to strain attached cable. (A,B)
Open flap and remove KDC270 half-way; any
further may cause damage to the cable. (G,H)
Disconnect the adaptor from KDC270 one side
at a time. Do not pull from both sides. (I,J)
1.
2.
3.
1.
2.
Ring Scanner
/