KOAMTAC 908590 KDC270 Finger Trigger Glove User manual

KDC270 Finger Trigger Glove

Installation Manual

1 KDC Finger Trigger Glove

Installation Instructions

Removal Instructions

X X

Protective Boot

Charging Cradle

Additional KDC270 Accessories:

*KDC270 sold separately

What’s in the box?

Return adaptor to pocket and close flap for storage.

Slide the KDC270, with adaptor attached, all the

way into the pocket and close flap. (E,F)

Insert KDC270 into pocket and connect adaptor to

bottom of scanner. (C,D)

Open bottom flap and pull adaptor out of pocket

being careful not to strain attached cable. (A,B)

Open flap and remove KDC270 half-way; any

further may cause damage to the cable. (G,H)

Disconnect the adaptor from KDC270 one side

at a time. Do not pull from both sides. (I,J)

Ring Scanner

This manual is also suitable for