Metropolitan N3713-PW User manual

Brand: Metropolitan

Model: N3713-PW

Type: User manual

This manual is also suitable for

N3713-BP

Metropolitan N3713-PW is a versatile and stylish lighting fixture that can elevate the ambiance of any room. With its adjustable arms and shade, you can customize the lighting to suit your specific needs and preferences. The fixture's durable construction and easy installation make it a great choice for both residential and commercial applications.

Here are some of the key features and possible use cases for the Metropolitan N3713-PW:

Adjustable arms and shade: The fixture's arms and shade can be adjusted to direct light exactly where you need it. This makes it ideal for task lighting, accent lighting, or general illumination.

Here are some of the key features and possible use cases for the Metropolitan N3713-PW:

Adjustable arms and shade: The fixture's arms and shade can be adjusted to direct light exactly where you need it. This makes it ideal for task lighting, accent lighting, or general illumination.

INSTALLATION INSTRUCTION FOR N3713

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

READ AND SAVE THESE INSTRUCTIONS

PREPARATION

1. Shut off the power at the fuse box or circuit

breaker box. If necessary, remove the existing

fixture and its mounting hardware from the

ceiling.

2. Carefully remove the new fixture from the carton

and check that all parts are included as shown in

the illustration.

ASSEMBLING THE FIXTURE (Fig. 1)

3. Thread the center rod (O) onto the nipple (P),

then thread the coupling (N) into the center rod

(O).

4. Secure the coupling (G) of the arms (J) to the

coupling (F) using screws (H).

MOUNTING THE FIXTURE (Fig.1)

4. Thread the two mounting screws (A) (Size: #8-

32*1.3”L) half way into the pre-drilled holes in the

circular strap (B) spaced the same distance apart

as the holes in the fixture canopy (D).

5. Attach the circular strap (B) to the outlet box (not

provided) using the outlet box screws (C) (Size:

#8-32*0.6”L) through the slotted holes. The side

of the circular strap (B) marked “GND” must face

out.

CONNECTING THE WIRES (Fig. 2)

6. Connect the electrical wires as shown in Fig. 2,

making sure all wire connectors are secured. If

your outlet box has a ground wire (green or bare

copper), connect the fixture’s ground wire to it.

Otherwise, connect the fixture’s ground wire

directly to the circular strap (B) using the green

screw provided. After the wires are connected,

tuck them neatly inside the outlet box.

COMPLETING THE INSTALLATION (Fig. 1)

6. Place the canopy (D) onto the mounting screws

(A) and secure with the finials (E).

7. Raise the shade (M) and connect the hooks (K) of

the arms (J) to the loops (L).

8. Install the light bulb(s) (not included) in accordance

with the fixtures specifications (DO NOT EXCEED

THE MAXIMUM WATTAGE!) (NE PAS

DEPASSER LA PUISSANCE NOMINALE

MAXIMALE!)

Your installation is now complete. Return the

power to the outlet box and test the fixture.

Fig.1

Fig.2

Set#

-Circular strap

-Ground screw

-Mounting screws*2

-Junction box screws*2

A-020

Metropolitan N3713-PW User manual

Brand: Metropolitan

Model: N3713-PW

Type: User manual

This manual is also suitable for

N3713-BP

Here are some of the key features and possible use cases for the Metropolitan N3713-PW:

Adjustable arms and shade: The fixture's arms and shade can be adjusted to direct light exactly where you need it. This makes it ideal for task lighting, accent lighting, or general illumination.

Download PDF

report

Metropolitan N3713-PW User manual

This manual is also suitable for

Metropolitan N3713-PW User manual

Related papers

Other documents