Ohlins XTN KIT DRC Mounting Instruction

Brand: Ohlins

Model: XTN KIT DRC

Type: Mounting Instruction

DRC Update kit

XTREME CAR

Mounting Instructions

XTREME CAR DRC UPDATE KIT

DRC Update Kit for Xtreme Car

We are happy to introduce for the TTX30 the WRC developed Dynamic Rebound Control, DRC.

This feature adds traction and smoothness to the car and allows you to close the rebound adjuster

without losing traction and with that the possibility to reduce spring rate to gain even more traction

without losing body stability.

Each kit contains parts for 4 dampers.

Kit parts DRC Update kit

Component Part Part Description Qty per Assembly

03077-31 Piston TTX30 DRC 4

01200-01 Mounting instruction 1

00592-32 Packing 220x160x65 1

21750-25 Washer 8/25/2 4

21018-21 Piston band soft 6.2/30 4

00638-66 O-ring 21.95x1.78 4

00530-22 Shim 12/22/0.30 4

01149-01 Wave washer 12/18/3.5 4

06751-02 Spacer 12x14.7x2.5 4

02056-01 Check valve seat 4

00185-12 Shim 8/12/0.15 16

00187-22 Shim 8/22/0.25 4

To install the parts, remove the standard piston and all components on the shaft end. Install the

parts included in the kit in the order specied on the drawing and reuse the nut from the original

installation. Torque to specied value.

This DRC setting is applicable to all settings delivered from Öhlins. There is no need to change

the setting when installing this kit. By installing this feature there might be improvements to make

by changing setting, recommended is to rst changing clicks on the damper and if necessary

re-shimming the damper to get back to the middle of the adjustment range.

XTREME CAR DRC UPDATE KIT

Öhlins Racing AB

Box 722

S-194 27 Upplands Väsby, Sweden

Phone +46 8 590 025 00

fax +46 8 590 025 80

reserved. Any reprinting or

unauthorized use without the written

permission of Öhlins Racing AB

is prohibited.

Öhlins products are subject to

continuous improvement and

development, therefore, although

these instructions include the most

up-to-date information available at

the time of printing, minor updates

may occur.

To nd the latest information

contact an Öhlins distributor.

Please contact Öhlins if you have

any questions regarding the

contents in this document.

Part no. MI_XTN KIT DRC

Issued 2020-10-15

Ohlins XTN KIT DRC Mounting Instruction

Ohlins XTN KIT DRC Mounting Instruction

Ohlins XTN KIT DRC Mounting Instruction

Related papers

Other documents